Contents Ⅰ Installation Manual 1. Hardware Installation 2. Software Installation Ⅱ User Manual 3. User Manual- Server 01. Main Program 02. Search Program 03. AVI Backup Manager 04. Backup Manager 4. User Manual- Client 01. NetClient Program 02. WebClient Program ※ Annex Annex 1. I/O Device Annex 2. Dynamic IP Annex 3.
Ⅰ Installation manual - Hardware Installation 2. DVR Audio Installation 1. Hardware Installation Please check contents before installation: DVR Board, Extension Cable, Audio & PTZ Installation, etc., if you are missing any parts please contact your local dealer. 2-1. Prepare DVR PC and MIC. 2-2. Connect the MIC to the Mainboard MIC Port of DVR PC OR the Audio IN port on DVR Board. Please connect the Speaker to the back panel of DVR PC. 1. DVR Board & Extension Cable Installation 1-1.
Ⅰ Installation manual - Hardware Installation - HP Board: Connect the 8CH MIC(B) to DVR Board(A) starting from the top. 3. P/T/Z Installation 3-1. P/T/Z Cable [A] Cable : Connect to COM port of DVR PC [B] Cable : Connect to DVR Board [C] Cable : Connect to Receiver Cable <8CH> B A C - RC Board: Connect the 4CH MIC(B) to DVR Board(A) starting from the left. 4. Real Display(RD) Board Installation 4-1.
Ⅰ Installation manual - Software Installation 5. I/O Board Installation 1. Software Installation 5-1. Prepare Sensor, Alarm, I/O Board and I/O Extension Board for I/O Board Installation. < 8 port In/Out Connection> 4CH Input 5CH Output You can install SmartDVR Software by using SmartDVR Formula CD or downloading from INTOTECH website, www.intotech.co.kr. Software CD consists of Server Package (Main program, WebClient program, Apache HTTP Server program), Client Package (NetClient program) & AVI Codec.
Ⅰ Installation manual - Software Installation 1. SmartDVR Apache HTTP Server (Web Server) Installation 1-1 Installation wizard tool will appear. Click [Next]. 1-2 Read the License Agreement and if you agree to the contents, select [I accept…] and click [Next]. 1-3 Click [Next] after checking server information of Apache HTTP Server. 1-4 Insert Network Domain, Server Name, Administrator’s E-mail Address. (This procedure is only a formality.
Ⅰ Installation manual - Software Installation 12 1-5 Select Setup Type as [Complete] and click [Next]. 1-7 After the setting is finished, click [Install] and start installation. 1-6 Click [Next] without change of setting. Note: Do not change the directory! 1-8 After the installation is done, click [Finish].
Ⅰ Installation manual - Software Installation 1-9 After the installation is finished, a message confirming the change of the Server port of Apache will appear. 2-2 Check the contents of License Agreement; if you agree to the contents, click [Yes]. 2 SmartDVR WebClient Installation 2-1 After the Installation Wizard Tool is appeared, click [Next]. 2-3 After the installation is done, click [Finish].
Ⅰ Installation manual - Software Installation 3 SmartDVR Formula Installation 3-1 After Installation Wizard Tool is appeared, Click [Next]. 3-2 Check the details of License Agreement; if you agree to the contents, click [Yes]. 16 3-3 After choosing [Destination Folder] for installation, click [Next]. 3-4 After the installation is done, click [Finish].
Ⅰ Installation manual - Software Installation 3-5 Driver Installation: Wizard automatically installs drivers according to each board type. 5 NetClient Installation 5-1 After the Installation Wizard Tool is appeared, click [Next]. 3-6 Reboot PC after all the installation. 4. SmartDVR Formula Uninstallation 4-1 Goto [Start] – [Control panel] and click [Add/Remove Program]. 4-2 Select [SmartDVR Formula] and click [Change/Remove]. 5-2 After choosing [Destination Folder] for installation, click [Next].