User's Manual

ManualsBrandsIntex Development ManualsElectronicsTransmitter for Swim Trainer

303

(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017

English

OWNER’S MANUAL

IMPORTANT

SAFETY RULES

Read, understand, and follow

all instructions carefully before

installing and using this product.

For illustrative purposes only. Pool not included.

Hydro Flow™ Swim Trainer

Model SM24101

110-120V AC / 60Hz

IMPORTANT!

DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance, Visit

www.intexcorp.com

For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):

1-800-234-6839

Monday through Friday, 8:30am to 5:00pm Pacific Time

303-*PO-R0-1702

Don’t forget to try these other fine Intex products: pools, pool

accessories, inflatable pools and in-home toys, airbeds and boats

available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves the

right to change specifications and appearance, which may result in

updates to the instruction manual without notice.

Summary of content (20 pages)

PAGE 1
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 OWNER’S MANUAL English 303 PO IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. Hydro Flow™ Swim Trainer Model SM24101 110-120V AC / 60Hz For illustrative purposes only. Pool not included.
PAGE 2
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English TABLE OF CONTENTS Warnings..................................................................................... 3 Parts Reference.......................................................................... 4-5 Product Specification................................................................ 6 Setup Instructions...................................................................... 6-13 Operating Instructions......
PAGE 3
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities. • Children must stay away from this product and electrical cord(s). • Assembly and disassembly by adults only.
PAGE 4
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 4 9 4 2 6 1 7 8 5 Intex Rectangular Frame Pool Mounting Bracket In Ground Pool Mounting Bracket 4 9 2 14 11 3 15 6 7 13 10 8 8 12 Intex Round Frame Pool Mounting Bracket. NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
PAGE 5
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English PARTS REFERENCE (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 4 19 18 17 20 16 21 22 24 23 31 33 27 30 25 28 26 29 32 REF. NO. DESCRIPTION QTY. IGP POOL Intex Rectangular Intex Round Frame Frame Pool Pool SPARE PART NO.
PAGE 6
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English PRODUCT SPECIFICATIONS Model: Voltage: SM24101 Transformer input 110-120V AC / 60Hz 8A Transformer output 24V DC 35A Suitable for: In ground pool or Intex above ground metal frame pools Pool water temperature range: 25ºC - 35ºC Speed Setting* 1 2 3 4 5 6 7 8 m/s 0.66 0.77 0.83 0.94 0.98 1.06 1.16 1.21 ft/s 2.17 2.53 2.72 3.08 3.22 3.48 3.81 3.
PAGE 7
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English SETUP INSTRUCTIONS (continued) Pool Mounting Bracket Assembly A: For Intex Rectangular Frame Pools 1. Mounting Bracket Assembly (see figures 1.1 to 1.2): 1.1 2 9 6 1.2 OR NOTE: Center the swim-trainer unit on the short-end side of the pool. 2. Installing the mounting bracket assembly onto a rectangular frame pool wall (see figures 2.1 to 2.3) 1 2 2.
PAGE 8
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English SETUP INSTRUCTIONS (continued) • Lock the bracket poles and mounting bracket assembly onto the U-shaped side support with the bracket pole fixer (7) and screws (8). (see figure 2.2). NOTE: Make sure all the screws are securely tightened and the mounting bracket top surface is level. 2.2 8 2.3 7 X X 3. Swim-Trainer Unit Assembly (see figures 3.1 to 3.2).
PAGE 9
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English SETUP INSTRUCTIONS (continued) B: For Intex Round Frame Pools 1. Mounting Bracket Assembly (see figures 4.1 to 4.5): • Identify the frame pool pipe shape. For “ ” shape pipe see figure 4.2 to 4.5. For “O” shape pipe see figure 4.3 to 4.5. 4.1 • For “ ” shape pipe, remove the bracket space filler (3) from the mounting bracket (2). (see figure 4.2). For “O” shape pipe go to next step.
PAGE 10
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English SETUP INSTRUCTIONS (continued) 2. Installing the mounting bracket assembly onto a round frame pool wall (see figures 5.1 to 5.3): 5.1 2 1 X • Attach the mounting bracket assembly onto the frame pool vertical legs with the horizontal pipe lugs (10), screws (8), and depending on the shape of the vertical leg pipe include A/B/C gap filler (11) (see figure 5.2).
PAGE 11
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English SETUP INSTRUCTIONS (continued) 5.5 Ajustable nut for adjusting the distance Water level 90 Degree C: For In Ground Pools 13 ”) m( 2m 33 215m m(8.5 5 ”) 6.2 Ø10mm(0.4”) 50mm(2”) 1. Mounting Bracket Assembly (see figures 6.1 to 6.3): • Make sure the top surface of the pool edge is stable, flat and level. • Pay attention to the electrical, gas and water lines when drilling the holes.
PAGE 12
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English SETUP INSTRUCTIONS (continued) 2. Swim-Trainer Unit Assembly (see figures 6.4 to 6.5). • Be sure the swim-trainer unit “support bracket” is closed before installing the swim-trainer unit onto the mounting bracket assembly (see figure 6.4). 6.4 4 22 Max X X • Adjust the support nuts on the swim-trainer unit until the swim-trainer unit is horizontal with the water surface (see figure 6.5). 6.
PAGE 13
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English SETUP INSTRUCTIONS (continued) Connecting the swim-trainer unit to the transformer (see figures 9.1 to 9.2). 1. Be sure the transformer (2) switch is OFF, connect the transformer cable to a grounded electrical outlet. 9.1 ON/OFF Switch Power receptacle Fuse Box 2. Transformer must be fixed to a solid, level ground or base.
PAGE 14
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English 303 PO OPERATION INSTRUCTIONS Display Panel Function Zone #2 Function Zone #1 Function D A B C I E F G Antenna Zone #1 Function A: On/Off Button B: Speed Increase Button C: Speed Decrease Button D: Speed Setting Display H A: On/Off Button: Once the swim-trainer unit is connected to the transformer and the transformer turned ON, use this button to active the system.
PAGE 15
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English 303 PO OPERATION INSTRUCTIONS (continued) Remote Control: 1. Remove the insulation material under the battery. Battery type (included): CR2032. Be sure the battery cover is securely attached. 2. Place the remote control in a reachable location (on top of the horizontal pool frame). The back of the remote control is magnetized”.
PAGE 16
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 303 PO English INTERNAL PARTS REPLACEMENTS Tools required: one Philip screwdriver, one flat screwdriver and one small adjustable wrench.
PAGE 17
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.
PAGE 18
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English 303 PO TROUBLESHOOTING GUIDE LED PANEL CODE E PROBLEM ● The ● ● C ● ● ● H L ● maximum operating time (90 minutes) has finished under the same set mode. ● It's normal. Turn off and unplug the unit. Then plug the RCD/GFCI back and restart all back again. Low water level. swim-trainer unit is not fully immersed in the water. Remote control is in an emergency cut off situation.
PAGE 19
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English 303 PO TROUBLESHOOTING GUIDE (continued) PROBLEM Mounting bracket can‘t be assembled with the in ground pool CAUSE ground is not concrete, i.e., it is asphalt, lawn or earth. The screws are not fully inserted in the drill holes. ● The ● Assembly ● ● The support bracket is not opened. Adjust the support nuts on the swim-trainer unit.
PAGE 20
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017 English 303 PO LIMITED WARRANTY PARTS LIST Your Hydro Flow™ Swim Trainer has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies only to the Hydro Flow™ Swim Trainer and accessories listed below.