INTEX® OWNER'S MANUAL Built-in Fast-Fill™* Electric Pump with Remote Control Model AP619DW 110-120V~ 60Hz 1.1A IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT « Always supervise children near the airbed.Children must not be left unattended when using the airbed. « Keep the storage bag away from babies and children.The storage bag is not a toy. When not in use, fold the bag and put it away out of the reach of children.
FCC USER INSTRUCTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received,including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PARTS REFERENCE Parts description: AIR PUMP 6. ADJUSTING MARK (cf ) 11.REMOTE CONTROL 2"2 IN 1" VALVES 7.DEFLATION MARK ( 45) 12.BATTERY COVER 3.FOAM VACUUM VALVE 8.INFLATION BUTTON 13.AC LINE CORD 4.INDICATOR LIGHT 9. ADJUSTING BUTTON §.INFLATION MARK ( cs) 10.DEFLATION BUTTON NOTE Drawings for illustration purpose only.May not reflect actual product. Not to scale. INFLATION : 1. Make sure the "2 in 1" valve is securely closed. See Fig (1). 2. Plug in the AC line cord into an AC electrical outlet.
5.Lay down on the airbed to test the firmness. 6.1f the sleeping surface is too hard, adjust the firmness by pressing and holding the adjusting button " on (either air pump or remote control). Air will exit through the air passage. See Fig (4). Release the adjusting button when the desired firmness is achieved. If the airbed becomes too soft repeat steps #4 thru #6.
located, let the airbed stand with the valve open for a while to let any remaining air to flow out of the valve. See Fig (7). Make sure to screw the exhaust valve cap back into the "2 in 1" valve. See Fig (1). 3. Place the line cord and the remote control in the storage pocket. 4. Fold the airbed to fit into the storage bag. 5. Place airbed into a dry storage area. INFLATION OPTION: 1.