Use and Care Guide

8.5"

11"

Model: ST-ILDIM-1

LED String Light Dimming Kit

with Remote Control

Use and Care Guide

Read and Save this Instructions Before Use

International Development Company

899 Henrietta Creek Rd.

Roanoke, TX 76262 USA

Toll-free: 1-877-723-0723

Made in China

The Honeywell Trademark is used under license

from Honeywell International Inc.

Honeywell International Inc. makes no

representations or warranties with respect

to this product. This product is manufactured for

International Development Company.

INSTALLATION

A- End Plug Connector

B- Adapter

C- Prong Plug

AC Outlet

1. Connect 1st String Light set to be controlled by dimmer to End Plug (A)

2. Connect additional string lights to 1st string light.

3. Plug in Prong Plug – C to power outlet.

4. Turn on or Dim Lights accordingly.

A B C

PAGE 1
8.5" INSTALLATION 1. Connect 1st String Light set to be controlled by dimmer to End Plug (A) 2. Connect additional string lights to 1st string light. 3. Plug in Prong Plug – C to power outlet. 4. Turn on or Dim Lights accordingly. EN LED String Light Dimming Kit with Remote Control Use and Care Guide Read and Save this Instructions Before Use AC Outlet A B C 11" A- End Plug Connector B- Adapter C- Prong Plug Model: ST-ILDIM-1 International Development Company 899 Henrietta Creek Rd.
PAGE 2
8.5" SAFETY INFORMATION PARTS AND SPECIFICATIONS WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes, and/or the current National Electric Code (NEC). Use this product only with its attached plug-in power cord. Any other power cord or feed may damage the fixture.