User's Manual

FCC ID: ANOSY3W26629DX Document Number: FCC-19-0164-0
1/2
IBM Japan Ltd.
1623-14, Shimotsuruma, Yamato-shi
Kanagawa-ken 242-8502, Japan
August 7, 2001
To whom this may concern
OET Requested Information
FCC ID : ANOSY3W26629DX
Applicant : International Business Machines Corporation
Correspondence Reference Number : 20156
731 Confirmation Number : EA101218
Original Requested Date : August 7, 2001
Subject :
1) This is in regard to the RF safety statement on page 52 of the manual about using Wireless PCMCIA
cards in the computer. You indicate that you are not restricting use of the PCMCIA slot with ONLY
IBM PCMCIA transmitters and having the user go to IBM's Website for information for compliance.
You state that any PCMCIA transmitter can be used in the PCMCIA slot. Correct/clarify this
colocation statement as appropriate.
FYI.. The conducted output power goes on the Grant of authorization. The grant will list 34 mW(15.)
rather than 31 mW.
Answer: The RF safety statement on page 52 will be revised as the attachment in next page.
The updated description is marked in blue.
Note1) There is no restriction about the exclusive use for the PCMCIA slot.
Note2) The guidance #1 is for the wireless options that conform to cooperate with the
applying integrated transmitter.
The current EIRP limits will be also introduced in the IBM Web site…i.e. 2.7mW for
the PCMCIA slot and 1.4mW for the USB port. If IBM will need to rise the EIRP limits,
we will repeat the Class II change submission. Therefore IBM can not fix those values
in the user’s manual.
Note3) The other instruction #2 is for other granted options that can’t not cooperate with the
applying integrated transmitter.
Answer: Yes, we understand that the grant will list 34mW.
Sincerely, August 7, 2001
Toshiya Murota
EMC Engineering
Yamato Laboratory, IBM Japan Ltd.