User's Manual

3938
FCC Statement
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmfulinterference in a res-
idential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to connect the interference by one or more of the following measures:
-Reorient the receiving antenna
-Increase the separation between the equipment and receiver
-Move the computer away from the receiver
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Radio Frequency Interference Requirements:This device is restricted to
indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires
this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile Satellite systems.
High power radar are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to
5.85 GHz bands. These radar stations can cause interference with and /or damage this
device.
Actiontec Electronics, Inc. Limited Warranty
Hardware: Actiontec Electronics Inc. warrants to the end user (“Customer”) that
this hardware product will be free from defects in workmanship and materials, under
normal use and service, for twelve (12) months from the date of purchase from
Actiontec Electronics or its authorized reseller.
Actiontec Electronics’ sole obligation under this express warranty shall be, at
Actiontec’s option and expense, to repair the defective product or part, deliver to
Customer an equivalent product or part to replace the defective item, or if neither
of the two foregoing options is reasonably available, Actiontec Electronics may, in its
sole discretion, refund to Customer the purchase price paid for the defective prod-
uct. All products that are replaced will become the property of Actiontec Electronics
Inc. Replacement products may be new or reconditioned. Actiontec Electronics
warrants any replaced or repaired product or part for ninety (90) days from ship-
ment, or the remainder of the initial warranty period, whichever is longer.
SOFTWARE: Actiontec Electronics warrants to Customer that each software pro-
gram licensed from it will perform in substantial conformance to its program spec-
ifications, for a period of ninety (90) days from the date of purchase from Actiontec
Electronics or its authorized reseller. Actiontec Electronics warrants the media con-
taining software against failure during the warranty period. The only updates that
will be provided are at the sole discretion of Actiontec Electronics and will only be
available for download at the Actiontec website, www.actiontec.com. Actiontec
Electronics’ sole obligation under this express warranty shall be, at Actiontec
Electronics’ option and expense, to refund the purchase price paid by Customer for
any defective software product, or to replace any defective media with software
which substantially conforms to applicable Actiontec Electronics published specifi-
cations. Customer assumes responsibility for the selection of the appropriate appli-
cations program and associated reference materials. Actiontec Electronics makes no
warranty or representation that its software products will meet Customer’s require-
ments or work in combination with any hardware or applications software products
provided by third parties, that the operation of the software products will be unin-
terrupted or error free, or that all defects in the software products will be corrected.
For any third-party products listed in the Actiontec Electronics software product
documentation or specifications as being compatible, Actiontec Electronics will
make reasonable efforts to provide compatibility, except where the non-compatibil-
ity is caused by a “bug” or defect in the third party’s product or from use of the
software product not in accordance with Actiontec Electronics published specifica-
tions or User Guide.
THIS ACTIONTEC ELECTRONICS PRODUCT MAY INCLUDE OR BE
BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS
GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THIS
ACTIONTEC ELECTRONICS WARRANTY DOES NOT APPLY TO SUCH
THIRD-PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY,
PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERN-
ING THE USE OF SUCH SOFTWARE OBTAINING WARRANTY SER-
VICE: Customer may contact Actiontec Electronics Technical Support Center with-
in the applicable warranty period to obtain warranty service authorization. Dated
proof of purchase from Actiontec Electronics or its authorized reseller may be
required. Products returned to Actiontec Electronics must be pre-authorized by
Actiontec Electronics with a Return Merchandise Authorization (RMA) number
marked on the outside of the package, and sent prepaid and packaged appropriate-
ly for safe shipment, and it is recommended that they be insured or sent by a method
that provides for tracking of the package. The repaired or replaced item will be
shipped to Customer, at Actiontec Electronics’ expense, not later than thirty (30) days
after Actiontec Electronics receives the defective product.
Return the product to:
In the United States
Actiontec Electronics, Inc
760 North Mary Avenue
Sunnyvale, CA 94085