User's Manual

Intermatic, Inc. Spring Grove, IL 60081 www.intermatic.com

Thank you for purchasing Intermatic’s HomeSettings devices. With the HomeSettings program you

can reliably and remotely control lighting and appliances.

The outstanding features of the HomeSettings HA05 Screw-in Lamp Module includes:

• Feedback that will allow you to see whether your device has received the ON/OFF (you cannot

DIM with this module) signal.

• RF signal reliability – each HomeSettings product has a special feature that virtually

guarantees that RF signals are received

• Ease of installation

• Manual override

• Weather resistant housing

• Controls compact fluorescent lights up to 42 Watts

• Compatible with other Z-wave™ enabled devices

The HA05 Screw-in Lamp Module is a Z-wave™ enabled device and is fully compatible with any

Home Settings network and any Z-wave™ enabled network. Z-wave™ enabled devices displaying the

Z-wave™ logo can also be used with Home Settings modules and controllers regardless of the

manufacturer, and Home Settings modules and controllers can also be used in other manufacturer’s

Z-wave™ enabled networks. Each module in a Home Settings network is designed to act as a

repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended

destination by routing the signal around obstacles and radio dead spots.

INSTALLATION _

1. Screw the HA05 Screw-in Lamp Module into a

medium base lampholder that supplies 120VAC, 60Hz.

2. Screw a lightbulb (up to 300 Watts) or a compact

fluorescent bulb (up to 42 Watts) into the module.

3. To manually turn ON the HA05 Screw-in Lamp

Module, press and release the Program/ON/OFF

button. The green indicator LED will turn ON, and the

lightbulb screwed into the HA05 Screw-in Lamp

Module will also turn ON.

4. To manually turn OFF the HA05 Screw-in Lamp Module, simply press and release the

Program/ON/OFF button. The green indicator will turn OFF and the lightbulb screwed into the

HA05 Screw-in Lamp Module will also turn OFF.

If the lightbulb does not turn ON, check to make sure that the lightbulb is seated properly, and

check to make sure that your lightbulb is not broken or defective.

For Indoor Use Only

MODEL HA05

SCREW-IN LAMP MODULE

PAGE 1
MODEL HA05 SCREW-IN LAMP MODULE For Indoor Use Only Thank you for purchasing Intermatic’s HomeSettings devices. With the HomeSettings program you can reliably and remotely control lighting and appliances. The outstanding features of the HomeSettings HA05 Screw-in Lamp Module includes: • Feedback that will allow you to see whether your device has received the ON/OFF (you cannot DIM with this module) signal.
PAGE 2
PROGRAMMING _ See the instructions for HA07 Master Remote Control or HA09 Handy Remote Control. FEDERAL COMMUNICATIONS COMMISSION STATEMENT_____________ This device complies with part 15 of the FCC rules. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.