Instructions / Assembly

ManualsBrandsIntermatic ManualsElectrical15 Amp Heavy Duty Plug-In Digital Timer

DAYSAV MAN AUTO RANDCLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

OK MODE PROG ON/OFF

DAYSAV MAN AUTO RAND CLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

OK MODEPROG ON/OFF

DAYSAVMAN AUTO RAND CLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSKDAWN

OK MODEPROG ON/OFF

DAYSAVMAN AUTO RAND CLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

OK MODEPROG ON/OFF

DAYSAVMAN AUTO RAND CLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

OK MODEPROG ON/OFF

Programming Dusk ON/Dawn OFF

1. From the MAN, AUTO,or RAND screen, press PROG.

The screen displays a ﬂashing 01. (Fig. 7)

2. Press PROG again.

3. Turn the selector knob until a ﬂashing ON and DUSK appears at the

top of the screen then press PROG.

4. Turn the knob to select the required days of the week

that you want the DUSK ON event to occur. (Fig. 8)

5. Press PROG twice. The screen displays EVENT 02 and

ﬂashing text at top.

6. Turn the knob until a ﬂashing OFF and DAWN appears

on the screen and press PROG.

7. Turn the knob to select the required days of the week for the DAWN OFF to

occur and press PROG.

8. Press OK to save the programming and return to the AUTO screen.

To Set a Dusk ON and Fixed Time OFF Program:

1. From the MAN, AUTO or RAND screen, press PROG. The screen displays a

ﬂashing 01. Press PROG again.

2. Turn selector knob until a ﬂashing ON and DUSK appears. Press PROG.

3. Turn the knob to select the required days for the DUSK ON event and press

PROG. The screen displays a ﬂashing 02. Press PROG.

4. Turn the knob until OFF ﬂashes and 12:00 AM appears then press PROG.

5. Turn the knob to select the desired days of the week for the Fixed Time

OFF event and press PROG.

6. Turn the knob to select the desired OFF hour and press PROG.

7 Turn the knob to select the desired OFF minute and press PROG.

8. Press OK to return to the AUTO screen.

To Set a Fixed Time ON and Fixed Time OFF Program

1. From the MAN, AUTO or RAND screen, press PROG. The screen displays a

ﬂashing 01. Press PROG.

2. Turn the knob until ON ﬂashes and 12:00 AM appears. Press PROG.

3. Turn the knob to select the required days for the ﬁxed time ON and press PROG.

4. Turn the knob to select the desired ON hour and press PROG.

5. Turn the knob to select the desired ON minute and press PROG. The

screen displays a ﬂashing 02. Press PROG again.

6. Turn the knob until OFF ﬂashes and 12:00 AM appears and press PROG.

7. Turn the knob to select the desired days of the week for the ﬁxed time OFF

to occur and press PROG.

8. Turn the knob to select the desired OFF hour and press PROG.

9. Turn the knob to select the desired OFF minute and press PROG.

10. Repeat steps 2-12 for additional (higher numbered) ON/OFF events or

press OK to return to the AUTO screen.

To Review/Revise Calendar Settings

1. Press MODE repeatedly until CLOCK is displayed.

2. Press OK repeatedly to step through all settings until Time of Day and MAN

is displayed.

3. Use selector knob to revise and OK button to save changes.

4. Use MODE button to select MAN, AUTO or RAND operation.

To Review/Revise ON/OFF Settings

1. Press PROG button.

2. Turn selected knob to view all 28 possible settings.

3. Revise per setting procedure.

4. Press OK to return to AUTO mode.

5. Use MODE button to select MAN, AUTO,or RAND operation.

Select Operating Mode

1. PRESS MODE button to select:

a. AUTO (Timer follows your program)

b. RAND (Timer follows your program with daily RANDOM variations in

ON/OFF times.

c. MAN (Timer saves but ignores your program. Use ON/OFF to switch the load).

About the Batteries

The battery voltage is continuously monitored. If a low

voltage is detected, the low battery indicator will be dis-

played. (Fig. 9).

•ThetimerrequirestwoLR44batteriestokeeptime

up to three months without power.

•Replacethebatteriesassoonpossibleafterthelowbatteryindicatorappears.

•Changethebatterieswithinoneminuteofunplugginginordertokeepthetime

and date settings. Afterwards, if the display is wrong or ﬂashes “12:00 AM”,

reset the time and date. All other settings (your ON and OFF programming) remain

in memoryindenitelywithoutbatteryorACpower.

•Whilethebatteriesareremoved,thetimerwillturnoffthedisplaytoconserve 

power.

•Disposeoftheusedbatteriespromptlyaccordingtolocal

regulations. Keep batteries away from children.

Replacing the Batteries

•Unplugtimerbeforereplacingbatteries.

To remove the batteries, carefully pry the battery holder up

with a small ﬂat screwdriver. Install the new batteries as

shown in Fig. 10. Firmly place the battery holder into

the switch.

Fig. 2

Fig. 4

Fig. 5

Fig. 6

Digital Timer

Installation and User Instructions

MODEL DT620 Series

• Input:102-132VAC60Hz,2.5Wmax.

• Output:15Aoutput,1800Wresistiveand12Ainductive,8.3A,1000Wtungsten,1/2HP

Ratings

• Risk of injury or death. Always plug three-prong plug into a properly grounded

outlet. Never attempt to defeat this safety feature.

• Do not use timer to control devices that could have dangerous consequences due

to inaccurate timing, such as sun lamps, sauna, heaters, crock pots, etc.

• Unplug timer before replacing batteries.

WARNING

• Follow local electrical codes during use.

• Dispose of used batteries promptly per local regulations.

Risk of FIre or Electrical Shock

NOTICE

Timer Overview

DAYSAV MAN AUTO RAND CLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

OK MODE PROG ON/OFF

Item Description

A Battery Holder

B Low battery indicator

C Time of Day display

D Control buttons (4)

E Grounded outlet (2)

F Selector knob

G Reset button

H Day of Week display

I Event display

J Mode display

K ON/OFF indicator light

L Battery Pull Tab

Fig. 1

Fig. 3

DAYSAV MAN AUTO RAND CLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

Enable Battery

1. RemovePullTab(L)(Fig.1)frombatteryholderifpresent.

2. Display shows 12:00. If no display see troubleshooting guide.

3. For your convenience timer may be set while unplugged. Display

turns OFF after 1 minute to save battery. Press any button to turn display back ON.

Clear Out Old Settings

1. Press and hold the ON/OFF button.

2. WhileholdingON/OFF, press and hold the reset button (G)

for ﬁve seconds with a blunt object, until display shows “CLR”.

3. Release ON/OFF and RESET buttons. The screen displays 12:00 AM,

with 12 ﬂashing. (Fig. 2) Proceed to step 2 below.

Set The Time, Date and Location

1. If necessary, press MODE to display CLOCK in the top right corner

of the screen, then press OK.Hoursdigitsash.

2. Turn the selector knob to set the current hour and press OK.

3. Turn the selector knob to set the current minute and press OK.

4. Turn the knob to set the desired year and press OK. (Fig. 3)

5. Turn the knob to set the desired month and press OK.

6. Turn the knob to set the correct date and press OK. The screen displays DAY SAV and

ﬂashing AUTO (Meaning AUTOmatic DAYlight SAVing Time adjustment is enabled).

7. To accept AUTO Daylight Saving Time adjustment press OK and proceed to step 8.

 TodisableDaylightSavingAdjustment(Forexample,inArizonaorHawaii)turnknobto

display ﬂashing MAN then press OK. LOC will show on top of display.

(Fig. 4) Proceed to step 13.

8. Steps 8-10 allow you to change the Daylight Saving Time (DST)

adjustment dates. The timer is factory-set to the US Daylight

Saving rules effective from the year 2007 forward. The display will

show ON DAY SAV, ﬂashing 03, and WK 02, meaning timer will adjust

forward on 2nd Sunday in March. Proceed to step 9 if you need to change the factory

settings or press OK repeatedly to accept the factory settings until LOC appears on

top of display and proceed to step 13. (Fig. 4)

9. Turn the knob to change the ﬂashing 03 to the required new month (01-06) for the

spring adjustment, then press OK.

10. Turn the knob to change the ﬂashing 02 to the required new week (01-02-03-04-L)

for the spring adjustment, then press OK. (“L”meansLastweekofmonth).

11. Turn the knob to change the ﬂashing 11 to the required new month (07-12) for the

autumn adjustment, then press OK.

12. Turn the knob to change the ﬂashing 01 to the required new week (01-02-03-04-L)

for the autumn adjustment, then press OK. LOC shows at top of display. (Fig. 3)

13. Turntheknobtoselectthedesiredstateorprovince(ifinCanada)or

MEX for Mexico and press OK.

14. Turn the knob to select the region of the state or province and press OK.

15. TurntheknobtoselectthetimezoneandpressOK. The Dawn time

ﬂashes.

16. Turn the knob to adjust the Dawn Time, (Fig. 5) if necessary and

press OK.

17. Turn the knob to adjust the Dusk Time, (Fig. 6) if necessary and

press Ok. Display shows MAN, and Time of Day.

Fig. 7

DAYSAV MAN AUTO RANDCLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

OK MODE PROG ON/OFF

Fig. 9

DAYSAV MAN AUTO RANDCLOCK

YEARDATE

MONTH

SKIP

EVENT

MO TU WE TH FR SA SU AM PM

OFF LOC DUSK DAWN

OK MODE PROG ON/OFF

Fig. 8

Fig. 10

Summary of content (4 pages)

PAGE 1
Digital Timer Programming Dusk ON/Dawn OFF MODEL DT620 Series Ratings • Input: 102-132 VAC 60 Hz, 2.5W max. • Output: 15A output, 1800W resistive and 12A inductive, 8.3A, 1000W tungsten, 1/2 HP • • • • Follow local electrical codes during use. Dispose of used batteries promptly per local regulations.
PAGE 2
Temporizador digital MODELO serie DT620 Fig. 7 1. Desde la pantalla MAN (Manual), AUTO (Automático) o OK MODE PROG ON/OFF RAND (Aleatorio), presione PROG (Programar). La pantalla mostrará un 01 parpadeante. (Fig. 7) 2. Presione PROG nuevamente. 3. Gire la perilla selectora hasta que aparezcan ON (Encendido) y DUSK (Ocaso) parpadeando en la parte superior de la pantalla, luego presione PROG. 4. Gire la perilla para seleccionar los días de la semana Fig.
PAGE 3
Minuterie numérique Programmation de MARCHE au crépuscule/ ARRÊT à l’aube MODÈLE Série DT620 Fig. 7 1. Depuis l’écran MAN, AUTO ou RAND, appuyer OK MODE PROG ON/OFF sur PROG. L’écran affiche 01 en clignotant (Fig. 7). 2. Appuyer une nouvelle fois sur PROG. 3. Tourner le bouton sélecteur jusqu’à afficher ON et DUSK en clignotant en haut de l’écran puis appuyer sur PROG. 4. Tourner le bouton pour sélectionner les jours de la semaine où l’évènement DUSK ON (marche au crépuscule) doit se produire. Fig.
PAGE 4
Troubleshooting Guide Observed Problem Possible Cause What to Do Battery symbol always shows in the upper right of display when plugged in or no display at all when unplugged and buttons are pressed. (Note: battery display takes 1 minute to recognize installed or removed batteries.) Low, missing, or backwards batteries, pull tab not removed, or poor contact in battery holder. Remove pull tab. Verify correct battery direction per outline on inside or “+/-” on outside of holder.