Spec Sheet

ManualsBrandsInterlogix ManualsAccessories8-Port 10/100+2 GigE TP/SFP Industrial Full PoE Managed Switch

8-Port 10/100mbps Plus

2 Gigabit SFP Combo

Managed Switch

8-Port 10/100mbps Plus

2 Gigabit SFP Combo

Managed POE Switch

7-Port 10/100mbps Plus

3-Port Gigabit SFP Combo

Managed Industrial Switch

N e t w o r k T r a n s m i s s i o n P r o d u c t s

Industrial Managed Ethernet Switch

GE-DSH-82/

GE-DSH-73 Series

Industrial Managed

Ethernet Switch

Overview

The IFS Transmission Industrial Managed Switch Series with multiple

redundant ring technology is equipped with eight 10/100Mbps Fast

Ethernet ports and two gigabit TP/SFP combo interfaces, and the GE-

DSH-73 is equipped with seven 10/100 MpS Fast Ethernet ports and

three gigabit TP/SFP combo interfaces. It is a industrial, fully managed

Ethernet Switch speciﬁcally designed to operate reliably in electrically

harsh and climatically demanding environments. The GE-DSH-82/GE-

DSH-73 Series is the most dependable choice for highly managed and

Fiber Ethernet application.

• Wide-rangeoperating

temperature

• RedundantEthernetnetwork

• Manageable

• Powerredundant

• Gigabit/beruplinkcapability

• IndustrialFailSafeRing:fast 

recovery to a redundant

Ethernet network

The GE-DSH-82/GE-DSH-73 Series supports robust advanced features

including IEEE 802.1Q VLAN, GVRP, port link aggregation, QoS, broadcast

storm control and MAC address ﬁltering. It also includes IGMP snooping

enhanced security with IGMP snooping and querying multicasting for

video operations and bandwidth utilization to ﬁt a variety of applications.

Via aggregation of supporting ports, the Series allows the operation

of high-speed trunk combining multiple ports. A maximum of up to

four ports can be assigned for four trunk groups and support fail-over

as well. Additionally, its standard-compliant implementation ensures

interoperability with equipment from other vendors.

Standard Features

8-Port 10/100Base-TX RJ-45 (GE-DSH-82/GE-DSH-82 PoE)•

2-Port Gigabit TP/SFP combo interface, SFP (Mini-GBIC) supports •

100/1000 Dual Mode (GE-DSH-82/GE-DSH-82 PoE)

7-Port 10/100 Base RJ-45 (GE-DSH-73)•

3-Port Gigabit TP/SFP combo interface, SFP (Mini-GBIC) supports •

100/1000 Dual Mode (GE-DSH-73)

1 RJ-45 console interface for switch basic management and setup•

Relay alarm for port breakdown, power failure•

Supports 4000 VDC Ethernet ESD protection •

FCC Class A, CE compatibility •

Free-fall, shock and vibration stability •

Provides redundant backup feature and recovery time less than 20ms•

Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z •

gigabit Ethernet standards

Supports auto-negotiation and half-duplex/full-duplex modes for •

all 10Base-T/100Base-TX and 1000Base-T ports

Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x •

pause-frame ﬂow control (full-duplex) groups, out of 4K VLAN IDs

Supports spanning tree protocol•

Supports strict priority and Weighted Round Robin (WRR) policies•

Ingress/egress bandwidth control on each port•

IGMP query mode for multicast media application•

Dual power operation; External power supply and DIN rail powered•

IP address security management to prevent unauthorized intruder•

Port mirroring to monitor the incoming or outgoing trafﬁc on a •

particular port

Web-based, telnet, console command line management•

Supports LLDP to allow switch to advise its identiﬁcation and •

capability on the LAN

The GE-DSH-82/GE-DSH-73 Series features strong and rapid self-

recovery capability to prevent interruptions and outside intrusions. It

incorporates advanced redundant data ring technology, rapid spanning

protocol (IEEE 802.1w RSTP) and redundant power supply system into

any industrial automation network to enhance system reliability and

uptime in harsh factory environments. It also protects industrial network

connectivity with switching recovery capability. This capability is used for

implementing fault-tolerant ring and mesh network architectures. If the

industrial network is interrupted accidentally, the fault recovery times

can be less than 20ms. This fast recovery time quickly brings the network

back to normal operation.

With IP-30 aluminum industrial case protection, the GE-DSH-82/GE-

DSH-73 Series provides a high level of immunity against electromagnetic

interference and heavy electrical surges usually found on plant ﬂoors

or in curbside trafﬁc control cabinets. The Series also provides a wide

range of power supply options suitable for multiple industries and for

worldwide operation. Its operating temperature range from -40 to 75

degrees C allows the managed industrial switch to be placed in almost

any difﬁcult environment. Two Gigabit ports provide drop and insert

functionality with a third for uplinking.

Summary of content (4 pages)

PAGE 1
Network Transmission Products Industrial Managed Ethernet Switch Overview The IFS Transmission Industrial Managed Switch Series with multiple redundant ring technology is equipped with eight 10/100Mbps Fast Ethernet ports and two gigabit TP/SFP combo interfaces, and the GEDSH-73 is equipped with seven 10/100 MpS Fast Ethernet ports and three gigabit TP/SFP combo interfaces.
PAGE 2
GE-DSH-82/GE-DSH-73 Series Industrial Managed Ethernet Switch Comparisons GE SKU GE-DSH-82 GE-DSH-82-PoE* GE-DSH-73 Hardware Specifications GE Description 10/100Mbps Copper Ports 8 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports 8 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports 7 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports 1000Mbps Copper Ports 2 10/100/1000Base-T RJ-45 ports 2 10/100/1000Base-T RJ-45 ports 3 10/100/1000Base-T RJ-45 ports SFP/Mini-GBIC Slots 2 SFP interfaces, shared with Port-9 and Port-10 2
PAGE 3
GE-DSH-82/GE-DSH-73 Series IndustrialManaged Ethernet Switch Comparisons GE SKU GE-DSH-82 GE-DSH-82-PoE* GE-DSH-73 Electrical Environmental Standards Conformance Layer 2 Function GE Description Management Interface Console, Telnet, Web Browser, SNMP v1, v2c and v3 Port Configuration Port disable/enable. Auto-negotiation 10/100Mbps full- and half-duplex mode selection. Flow control disable/enable. Bandwidth control on each port.
PAGE 4
5.98 in. (152 mm) Dimensional Diagrams 2.83 in. (72 mm) 4.18 in. (106.20 mm) 5.98 in. (152 mm) GE-DSH-82/GE-DSH-82-P0E 2.83 in. (72 mm) 4.18 in. (106.20 mm) GE-DSH-73 Ordering Information GE-DSH-82 GE-DSH-82-PoE GE-DSH-73 8-Port 10/100mbps Plus 2 Gigabit TP/ SFP Combo Managed Switch (Wide Operating Temp. -40~75°C) 8-Port 10/100mbps Plus 2 Gigabit TP/ SFP Combo Managed Poe Switch (Poe Full Power) (Wide Operating Temp.