Quick Operation Guide

ManualsBrandsInterlogix ManualsElectronicsConcord 5 Inch TouchScreen

Concord 5" TouchScreen Quick Operation Guide

Description

The Concord 5” TouchScreen is a 5-inch color LCD screen

with a graphical user interface designed to control the basic

functions of the Concord 6 or Concord 4 (revision 4.82 or later)

control panels. Use the touch screen to obtain home status (for

example, open doors, movement detected, etc.) and to control

the security system.

Using the touch screen:

• Easily obtain home/building status using At-A-Glance

(AAG) sensor status.

• Arm (ARM STAY or ARM AWAY) and disarm the system

• Activate a panic alarm to call the central monitoring station

in a non-medical emergency.

This document provides basic operation information for the

touch screen and security system. For complete Concord 4

system programming and operation, refer to the panel

documentation. For configuration and option details, contact

your security provider.

Safety Information

IMPORTANT SAFETY INFORMATION. READ ENCLOSED

WARNINGS AND SAFETY INFORMATION.

WARNING: CHOKING HAZARD.

The product accessory bag contains items that could be

choking hazards. Please keep away from small children.

ATTENTION: Le sachet d'accessoires produit contient des

éléments qui pourraient être les dangers d'étouffement.

Veuillez garder hors de la portée des jeunes enfants.

Main Screen

The Main screen is the display shown most of the time in

normal operation. All operations begin at (and inactivity reverts

to) this screen.

Access the Main screen:

• Via the Close icon – This returns the touch screen’s

display to the previous screen. Depending on which

display the touch screen is in, it may be necessary to

move through multiple levels of screens to reach the Main

screen.

• After a period of inactivity on any screen (unless you set a

blank screen as your default screen saver).

• When the panel enters an alarm. The touch screen

automatically returns to the Main screen.

Emergency Button

Touch the button and an Emergency screen

appears. Depending on the system, two or three buttons (the

Panic and Police buttons or the Panic, Police, and Fire

buttons) may appear. Select the appropriate button.

An emergency alarm initiated by mistake can be canceled by

touching the button and entering your user

access code within 30 seconds.

Notes

• If your system is connected to a security monitoring

service, the authorities will be notified. Contact your dealer

for details.

• The fire panic cannot be canceled.

Summary of content (6 pages)

PAGE 1
Concord 5" TouchScreen Quick Operation Guide Description Main Screen The Concord 5” TouchScreen is a 5-inch color LCD screen with a graphical user interface designed to control the basic functions of the Concord 6 or Concord 4 (revision 4.82 or later) control panels. Use the touch screen to obtain home status (for example, open doors, movement detected, etc.) and to control the security system. The Main screen is the display shown most of the time in normal operation.
PAGE 2
Time PRESS TO DISARM - Depending on your arming level, one of these icons will appear. Press to disarm your system. Enter your code in the keypad screen that appears. If you enter an incorrect code, press the Clear button and enter the correct code. Current time is located at the top center of the Main screen. Time is automatically updated by the security system time.
PAGE 3
Settings Screen Touch the Settings icon Settings screen appears. on the Main screen and the located in a less secure area, such as a garage. If this device is located in areas that are less secure, be sure your service provider has Quick Arm and Quick Exit programmed to off. The Setting options allow you to adjust the touch screen’s features. Programming Typical status indicators (excluding light screen): Touch the Settings icon on the Main screen and the Settings screen appears.
PAGE 4
To select a user number, simply touch number and enter their followed by touching the SAVE button. If your system is equipped with either a voice only module or phone interface/voice module, you will see the Voice Chime selection and volume controls. Set Up Schedules On the System Programming screen, touch the Set Up Schedules button. Here you can change Time Schedules. Time schedules are durations defined by a start time, a stop time, and the day of the week these times are effective.
PAGE 5
Set Date/Time Status LED (Blue light) On the System Programming screen, touch the Set Date/Time button. Here you can set the Date and Time settings. The touch screen has an LED that indicates power and sleep mode status at a glance. The table below explains LED behavior.
PAGE 6
Warnings and Disclaimers These products are intended for sale to, and installation by, an experienced security professional. UTC Fire & Security cannot provide any assurance that any person or entity buying its products, including any “authorized dealer,” is properly trained or experienced to correctly install security related products. For more information on product warnings, refer to firesecurityproducts.com/policy/product-warning/ or scan the code. Contact information For general information, see www.