Spec Sheet

1125 series recessed magnetic contacts
recessed stubby press fit magnetic contacts with wire leads
3/8 in. dia.
The 1125 series stubby press fit magnetic contact is a 3/8-inch
diameter switch designed specifically for applications where space is
limited.
The 1125’s short length makes it ideal for thin-framed windows and
doors where longer units cannot be used. Press fit ribs on the housing
make installation quick and easy.
• Press fit design makes installation easy
no screws or glue needed
• Small size perfect for thin-framed
windows and doors
• Good for use in vinyl-clad and custom
windows
• Ideal for pre-wiring; eliminates forcing
switch and pre-wire into the same header
hole
• Available wider gap distance helps
prevent false alarms caused by loose-
fitting doors and windows
Specifications
Voltage: 100 VAC/VDC max.
Current: 0.5 A max.
Power: 7.5 W max.
Loop type: Closed
Electrical configuration: Normally open
Gap distance: 1125: Up to 1/4 in.
1125W: Up to 3/4 in.
1125WB: Up to 1-3/8 in.
Lead type: 1 ft. #22 wire
Dimensions: 1125: 0.75 in. L x 0.375 in. dia. (19 x 9.5 mm)
1125W: 1.25 in. L x 0.375 in. dia. (32 x 9.5 mm)
1125WB: 0.75 in. L x 0.375 in. dia. (19 x 9.5 mm)
Housing: Flame retardant ABS plastic
Color: White or mahogany brown (1125 only)
Ordering information
1125N-10PKG (-50BOX) Recessed stubby press fit magnetic contact
with wire leads, 3/8 in. dia., 1/4 in. gap size,
white, pk/10 (pk/50 -50BOX)
1125M-10PKG Recessed stubby press fit magnetic contact
with wire leads, 3/8 in. dia., 1/4 in. gap size,
mahogany brown, pk/10
1125WN-10PKG Recessed stubby press fit magnetic contact
with wire leads, 3/8 in. dia., 3/4 in. gap size,
white, pk/10
1125WBN-10PKG Recessed stubby press fit magnetic contact
with wire leads, 3/8 in. dia.,1-3/8 in. gap size.
bare neodymium magnet, pk/10
1946N-10PKG Magnet for 1125 series, white, pk/10
Magnetic Contacts
GE
Security
Recessed Mount
Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [e-mail]