Data Sheet

Product Data Sheet
1070-N
Press-fit recessed mount magnetic contact
Press-Fit contact
Sentrol's 1075 series press fit switch is an 11 mm
diameter magnetic contact with wire leads. Use
no glue or screws to mount; small ribs on the
housing hold the contact in place. The heavy-duty
housing is resist against
crushing from swelling wood. Wide gap versions
are available for applications that may be prone to
false alarms caused by loose fitting doors. Use
indoors or outdoors for an attractive recessed
installation.
Applications
Can be used for recessed applications, either
indoor or outdoor.
Durability and dependability
The Sentrol high performance magnetic contacts
have been designed to facilitate installation and
ensure durability and dependability. Most are
conservatively rated at 10,000,000 cycles,
guaranteeing a long life. Every reed connection is
hand soldered and each magnetic contact is
tested before they leave the factory, 100% of the
time.
High quality components and materials
Reed legs are plated with rhodium or ruthenium,
and hermetically sealed in dry nitrogen. This
offers superior protection against sticking and
provides a moisture free environment therefore
preventing corrosion.
Built-in end of line 3K3 resistors
For seamless connection to the control panel, the
1075 series contains also contacts with built-in
end of line resistors. The 2 resistors with a value
of 3K3 each are configured in double end of line
configuration, allowing a quick, professional and
clean installation.
Standard Features
9.5 mm press-fit mounting, no screws or glue required
E
Heavy-duty housing resists crushing
E
Unobtrusive and neat
E
Attractive, added security of recessed installation
E
Versions with built-in 3K3 resistors available
E