User's Manual

ManualsBrandsInteractive Toy Concepts ManualsElectronicsWi-Spi Intruder

The Wi-Spi Intruder is a delicate machine, before removing it

from the packaging please read the instructions!

PACKAGE CONTENTS:

Congratulations on the purchase of your Wi-Spi Intruder. The Wi-Spi Intruder combines advanced, indoor hobby-level vehicle together with the

fun of social media. With its built-in camera, the Wi-Spi Intruder transmits streaming video to your Wireless Control Device which you can post to

your favorite social media website. This is the world’s premier hobby-level performance vehicle at mass-market featuring state-of-the-art Wi-Fi

control and video transmission capability. The Wi-Spi Intruder can be controlled by a smartphone such as an iPhone® or Android® phone. The

Wi-Spi Intruder can also be operated by an iPod touch®, iPad® or an Android® tablet. (For the purposes of this manual these third-party

products are referred to as “Wi-Fi Control Devices”). Up to 6 Wi-Spi Intruders can be operated simultaneously in the same general area. The

operational range of the Wi-Spi Intruder is about 100 feet (30 meters) depending on objects within the environment that can interfere with the

signal. The Wi-Spi Intruder can be controlled in two different ways. There is a “Control Pad Mode” and an “Accelerometer Control Mode” for

more advanced users. The built-in camera allows the user to record QVGA resolution (320 x 240 pixels) video, take still photos, or to see the

streaming live video as it is displayed on the Wireless Control Device’s screen. Do not throw away this instruction manual as it contains valuable

information for the operation of your Intruder as well as warranty information. The helpful tips in this pilot’s manual will improve your skill and

enhance your experience.

Look for these symbols for extra help.

UNPACKING YOUR WI-SPI INTRUDER:The Wi-Spi Intruder is a precision crafted, delicate machine. Before removing it from the

packaging please read the instructions!

To prevent damage during shipping, the Wi-Spi Intruder is securely fastened in the package. Please ensure that all of

the fastening locations are unfastened before attempting to remove the

Wi-Spi Intruder from the package. Be very

careful when removing the

Wi-Spi Intruder to prevent damaging it.

AC CHARGER - 1 Standard Electrical Outlet Plug

-1 Circular Charging Plug

LED SURVEILLANCE

LIGHTS

ON/OFF SWITCH

(under)

1. 1 x Wi-Spi Intruder

2. 1 x AC Charger

3. 1 x Instruction Manual

1. Download Intruder Control App from the Apple App Store® or from the Google Play® .

2. Turn on Wi-Spi Intruder and wait around 20 - 25 seconds.

3. Under the settings function on your Wi-Fi Control Device, connect to the Wi-Fi signal from Intruder (intruderXXXXXXX).

4. Exit Wi-Fi Control Device settings and launch Intruder app.

5. Press the Connect Button in the app and take off.

1. The screen displays your Wi-Spi Intruder’s camera view. You will always be able to see live streaming video on your Wi-Fi

Control Device. Press the options button to select the video or photo mode. Depending on which option you select, you will be

able to press the photo icon to snap a picture, press the video icon to shoot a movie clip. You can also select night vision mode.

2. Select the Control Pad Mode or the Accelerometer Control Mode using the toggle at the top of the Wi-Fi Control Device’s

screen. Please note, Accelerometer Control Mode requires more skill and experience to use. It is intended as an advanced

mode of control.

3. A) In Control Pad Mode, you can use the Forward/Reverse Slider on the left hand side to control the Forward / Reverse of

the Wi-Spi Intruder. You can also use the Left/Right Slider on the right hand side to control the Left – Right turning of the Wi-Spi

Intruder.

3. B) In Accelerometer Control Mode, advanced users control the Forward, Reverse, and Left – Right turning of the Wi-Spi

Intruder by tilt the Wi-Fi Control Device.

4. Use the Trim Control near the bottom center of the Wi-Fi Control Device to eliminate any unbalance left or right turn when it

move Forward / Backward, so it can keep to move in a straight line.

QUICK-START INSTRUCTIONS: QUICK-SYNC - CONNECT YOUR WI-SPI INTRUDER

The Wi-Spi Intruder has a built-in, non-removable, non-replaceable, rechargeable Lithium-Polymer Battery. Do not tamper with

this battery. Tampering with this battery is dangerous and will void the warranty.

There are no further battery requirements as the Wi-Spi Intruder can only be controlled by certain third party Wi-Fi Control

Devices. To ensure that your particular Wi-Fi Control Device has sufficient power during the operation of the Wi-Spi Intruder,

consult the manufacturer's specifications for your specific model.

WI-SPI INTRUDER BATTERY REQUIREMENTS:

The Wi-Spi Intruder needs to be charged prior to the first flight. Please charge the Wi-Spi Intruder before the first run for

optimal performance. It is necessary to charge the Wi-Spi Intruder before all subsequent runs where the internal battery has

been depleted on the previous run. Follow the below steps to charge your Wi-Spi Intruder:

1. Ensure the Wi-Spi Intruder's On / Off Switch is in the OFF position. The white headlight LED in the front of the Wi-Spi

Intruder will turn off.

2. Plug the AC Charger into an electrical power outlet.

CHARGING YOUR WI-SPI INTRUDER:

WARNING:

Always insert the AC adapter into the power source before inserting the Circular

Charging Plug into the Wi-Spi Intruder.

CHOOSING YOUR DRIVING LOCATION:

Your Wi-Spi Intruder is intended for indoor operation. The actual control range for most of the Wi-Fi Control Devices compatible

with your Wi-Spi Helicopter is up to 100 feet (30 meters). This range may vary from model to model and may also be affected

by interference within the operational environment. Make sure that your Wi-Spi Intruder does not have the opportunity to run in

a wet or hazardous area such as snow, water, mud, or dangerous rocks. The Wi-Spi Intruder is not water resistant.

CHARGING YOUR WI-SPI INTRUDER: -Continued

3. Insert the circular charging Plug into the Wi-Spi Intruder. Charging will start automatically.

Note, the white headlight LED in the front of the Wi-Spi Intruder will light up during

charging even though the Wi-Spi Intruder is turned off.

Charging will take 30 – 45 minutes for up to 30 minutes of run.

4. Once the charging is complete, the white headlight LED in the front of the Wi-Spi Intruder

will turn off.

6. Make sure to unplug the circular charging plug from the Wi-Spi Intruder’s charging port first.

Secondly, unplug the AC Charger from the power source.

7. The Wi-Spi Intruder is now ready to run.

Wi-Spi Intruder LED functions:

The Wi-Spi Intruder has white headlight LED in the front of the body.

White headlight LED is flashing after Intruder is turned on: Wi-Spi Intruder’s on-board computer is in the booting phase, it should take

around 20 to 25 seconds.

White headlight LED is On: The Wi-Spi Intruder is turned on and ready to sync with the Wi-Fi Control Device. It is also possible that the

Wi-Spi Intruder has already been synced with the Wi-Fi Control Device and is in operation while the head light is turned on.

White headlight LED is On during charging: The White Headlight is ON when Wi-Spi Helicopter is charging.

White headlight LED is Off: Wi-Spi Intruder is turned off and is not charging. It is also possible that the Wi-Spi Intruder is turned on but its

internal battery is depleted.

White headlight LED flashes after run: The internal battery voltage is low and needs to be recharged.

CHARGE TIME VARIES BASED ON THE WI-SPI INTRUDER’S INTERNAL BATTERY CHARGE

CONDITIONS. TYPICALLY AFTER A 30 MINUTE RUN THE WI-SPI INTRUDER WILL NEED A 30 – 45

MINUTE CHARGE.

YOU DO NOT NEED TO WAIT FOR THE CHARGE TO BE COMPLETE TO FLY. SHORTER CHARGE

TIMES = SHORTER RUN TIMES.

INTERRUPTING THE CHARGE BEFORE THE CHARGE CYCLE IS COMPLETED WILL NOT

DAMAGE THE WI-SPI INTRUDER’S INTERNAL BATTERY, HOWEVER FOR THE LONGEST RUN TIMES

PLEASE LET THE WI-SPI INTRUDER FINISH ITS CHARGE CYCLE.

Continued.

QUICK-START INSTRUCTIONS:DRIVE YOUR WI-SPI INTRUDER

CAMERA AND SOUND RECORDER

WARNING!!:

Never leave the charger unattended in the presence of children. The charger must be periodically examined

by an adult or a parent for conditions that may result in the risk of fire, electric shock, or injury to persons. In

the event that such conditions should arise, the charger should not be used until properly repaired.

CAUTION: ELECTRICALLY OPERATED PRODUCT:

NOT RECOMMENDED FOR CHILDREN UNDER 14 YEARS OF AGE.

AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE

OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK.

INPUT: AC 100-240V 0.32A MAX 50-60Hz

OUTPUT: DC 5V 1A

CHARGE PORT

(under)

Summary of content (4 pages)

PAGE 1
QUICK-START INSTRUCTIONS: QUICK-SYNC - CONNECT YOUR WI-SPI INTRUDER CHARGING YOUR WI-SPI INTRUDER: -Continued TM TM CAUTION: ELECTRICALLY OPERATED PRODUCT: NOT RECOMMENDED FOR CHILDREN UNDER 14 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK. INPUT: AC 100-240V 0.
PAGE 2
WI-FI CONTROL DEVICE SPECIFICATIONS: GETTING TO KNOW THE INTRUDER CONTROL APP INTERFACE: OPERATING YOUR WI-SPI INTRUDER CAMERA There are a few select Wi-Fi Control Devices which are compatible with your Wi-Spi Intruder. It is very likely that other Wi-Fi Control Devices will be compatible with the Wi-Spi Intruder in the future. For the latest updates on device compatibility, it is recommended to check the latest information at the following website: www.interactivetoy.com.
PAGE 3
DRIVING YOUR WI-SPI INTRUDER -(Continued): Limited 30-day warranty Product is warranted by Interactive Toy Concepts Limited against manufacturing defects in material and workmanship under normal use for thirty (30) days from the date of purchase. Warranty is validated upon receipt of proof or purchase and confirmation of UPC code. 4. Slide the Forward/Reverse slider on the Wi-Fi Control Device upwards/downwards to move the Wi-Spi Intruder forward/reverse. 5.
PAGE 4
ISSUE: TROUBLESHOOTING -Continued CAUSE: CORRECTIVE ACTION: Wi-Spi Intruder will not start, Wi-Spi Intruder’s White headlight LED is off. 1. Wi-Spi Intruder not turned on. 2. Battery is not charged. 3. Wi-Spi Intruder was not set to off during charging. 4. Wheels locked for overload protection. 1. Turn Wi-Spi Intruder on and sync it with your Wi-Fi Control Device. 2. Charge Internal Wi-Spi Intruder battery. 3. Ensure Wi-Spi Intruder is off and charge Internal Wi-Spi Intruder Battery. 4.