Protective Film for AirTag 20 Pack Set (10 Pairs) Installation Manual for Amazon Buyers Copyright 2021 © INTER9ERS All Rights Reserved. Version 1.
Hello! 안녕하세요. Words cannot describe how truly grateful we are to have your precious support in this world, especially during this pandemic. 팬데믹이 장기화 되고 있는 어려운 시기에 지구 반대편에 살고 있는 여러분의 소중한 성원을 받을 수 있어서 저희는 얼마나 고맙고 감사한지 말로 다 표현하기 어렵습니다. We are an honest, hard-working, and professional South Korea-based startup team specialized in making accessories for mobile devices that you use in daily life such as cellphones, tablets, smartwatches, earbuds, and item finders.
1 CHECK WHAT’S IN IT If some of them are missing, we are extremely sorry about it. Please kindly request a replacement by contacting Amazon support.
2 OVERVIEW One of the most detailed manuals :D (slightly long… but it is helpful to read all before you start to install films) 1 2 3 4 5 6 7 8 9 Please place all the COMPONENTS(p.1) and your AirTag(s) on a comfortable flat surface, such as a desk. Put the AirTag on an INSTALLATION PAD (the small rubber rings) to prevent it from moving easily. We do not recommend you peel off the adhesive cover in most situations.
3 HOLDING AIRTAG Put the AirTag on an INSTALLATION PAD (the small rubber rings) to prevent it from moving too easily. 2 AirTag 1 Installation Holding Pad Q: What is the adhesive covered by yellow plastic peel for? A: The ring with the adhesive can be easily attached to and removed from the ground and AirTag for stronger holding purposes. However, in most cases, it is not a must to use. We recommend you try it without using it first; and use it when you really need it.
4 FINDING RIGHT SIDES Open the clear plastic bag with FILMS, and separate the smaller and larger ones. Smaller for 1 Front Side. 2 Bigger for Back Side. Q: I see two different sized films. Which side for which one? A: You will install smaller ones onto the front side or metal-covered side of the AirTag, and bigger ones onto the backside or white-plastic-covered side of the AirTag.
5 CLEANING AIRTAG 5-1 Tear to open the CLEANING WIPES to mainly clean where the films are being installed. Use wet wipe first to remove dust and dirt. 1 WET Then, use dry wipe for cleaning off liquid that wet one left. 2 DRY Q: I found “1 - Wet” and “2 - Dry” on the cleaning wipes. How to use them? A: Please use the wet wipe first to clean the dust and dirt. And then use the dry wipe to clean off the liquid.
5 CLEANING AIRTAG 5-2 (continued) Use the DUST REMOVERS to remove all dust 100%! Make sure there are no dust! Q: What’s the correct way to use the dust remover? A: Very quickly, please gently bend the sticker from both edges with your thumb and index finger to dab out the dust with the stickers.
6 LOOKING OVER FILMS Pick a smaller FILM, and make sure you understand its structure for better installation. 4 Upper Cover 3 Core Film Downer Outer Cover 2 1 Downer Inner Cover Q: I found the complicated structure of the films. Can you explain it? A: Pick a FILM, and observe it for a moment. You will find the film has two different sides: one has one-layer cover as a whole, the other one has two layers of two covers that are overlapped half opposite.
7 INSTALLING FILMS 7-1 Peel off the downer outer cover first.
7 INSTALLING FILMS 7-2 (continued) Install the FILM from the edge of the metal-covered side of AirTag. Try your best to place it along the edge correctly.
7 INSTALLING FILMS 7-3 (continued) When the attachment is determined to be accurate in your view, please peel off the downer inner cover.
7 INSTALLING FILMS 7-4 (continued) Gently use your thumb to carefully press the film from the attached side to the opposite side, from the inner to outer. Very gentle and accurate.
7 INSTALLING FILMS 7-5 (continued) Then, peel off the upper cover from the upper side of the FILM to finish.
8 BACK SIDE INSTALLING Please kindly repeat the above procedures to install the film onto the back side of AirTag.
9 WIPE EVERY CORNER Lastly, it is an option to use the MICROFIBER CLOTH to clean every corner to complete. Of course, you can utilize it to clean your AirTag whenever you want. Great Job! If you have any questions, please tell us via Amazon dot com (US). Your inquiry is really important to us, and we will answer all your questions and issues as soon as possible.
! CAUTION! OMG! Nah! Wait! As soon as the film is attached to your AirTags, do not cram them into the cases. Especially, there's no entrance and you have to force it in, please wait for about 30 minutes before putting your AirTags into these cases. DO NOT FORCE IT IN, RIGHT AFTER INSTALLING THE FILMS.
─ THE END ─ We use English as a second language. If you found some grammatical mistakes in this manual, please send a message direct via Amazon.com. We will correct it as soon as possible. A small effort from you and us to protect our motherland Earth: we only provide the digital version of the manual to all of our products. Thank you again for choosing us! Welcome to LIVING. ENRICHED DAILY family :D SAFE · FINE · AUTHENTIC KCCC Co.
