OPERATING MANUAL REMOTE AMPLIFIER WITH ZONE SELECTOR RM-916
1 UNPACKING AND INSTALLATION Although it is neither complicated to install nor difficult to operate your power Amplifier, a few minutes of your time is required to read this manual for a properly wired installation and becoming familiar with its many features and how to use them. Please take a great care in unpacking your set and do not discard the carton and other packing necessary to return your set for when moving your set and are required if it ever becomes necessary to return your set for service.
2 FEATURES • SPEAKER LINE CONTROL Speaker line control can easily be achieved by connecting the RM-916 speaker control terminals to an Inter-M PX-9116 MATRIX unit. • CHIME Four tone pre-announcement chime, activated by push button CHIME switch. • OUTPUT LEVEL METER Ten segment LED bargraph on the front panel that indicates instantaneous signal output level of the RM-916. • MIC BROADCASTING Easy to use, highly sensitive condenser type MIC for clear broadcasting.
3 FRONT PANEL CONTROLS DC 24V IN SPEAKER CONTROL MIC INPUT 1 2 3 4 5 6 7 8 9 10 11 12 RM 13 14 15 16 COM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 RM COM AUX IN H G POWER SPEAKER CONTROL MIC H C RM-916 - 18 - 15 - 12 - OUTPUT LEVEL 9 - 6 - 3 0 MIN REMOTE AMPLIFIER WITH ZONE SELECTOR + 3 +6 CHIME AUX G LINE OUT MAX MIN MAX MIN MAX POWER CHIME +9 CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 ALL CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16 TALK 1
4 10. ALL CALL LED Visual indication showing that all the sixteen loudspeaker zones are selected. 11. CHIME SWITCH This switch, when pressed, will output a four tone pre-announcement chime to the selected loudspeaker zone(s). 12. CHIME SWITCH LED This LED will illuminate when the chime switch is pressed. 13. POWER LED This LED will illuminate when the POWER switch is ON. 14. TALK SWITCH The TALK ON switch activates for the MIC-916 (LED ON). 15. TALK LED Visual indication of the TALK ON switch.
5 CONNECTOR SECTION FUNCTIONS MIC INPUT DC 24V AUX IN IN SPEAKER CONTROL POWER + – H G MIC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 RM COM CHIME AUX H C G MIN MAX MIN MAX MIN MAX LINE OUT 1. LINE OUTPUT TERMINALS Connect the line output terminals to the REMOTE INPUT JACK of the Inter-M EMERGENCY PANEL EP9216. 2. AUX INPUT TERMINALS Connect the line output of a Cassette Deck, Tuner or CD player to these terminals. The input sensitivity of the AUX input is –20dB. 3.
6 CONNECTIONS EP-9216 WARNING; SHOCK HAZARD DO NOT OPEN. NO USER SERVICEABLE PARTS INSIDE.DO NOT EXPOSE UNIT TO RAIN OR MOISTURE AVIS; RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR. MATRIX S/N PRE IN REMOTE IN 2 TIMER IN REMOTE IN 1 AUTO ANN IN PRE OUT REMOTE MIC RM MIC SW AUTO.
7 BLOCK DIAGRAM
8 SPECIFICATIONS *0dB=0.775Vrms ELECTRICAL • Output Level/Impedance ........................................................................................................ +4dB/600Ω, BAL • Input Sensitivity/Impedance MIC...............................................................................................................................–60dB/600Ω, BAL AUX ........................................................................................................................
NOTE
NO: 9007921010