RM-05A Remote Amp with Zone Selector
RM-05A_E2010.3.249:2AM페이지 3 Contents Welcome Warning.........................................................................................................................................1 Installation Environment....................................................................................................................................2 Important Safety Instructions.............................................................................................................2 Features............
RM-05A_E2010.3.249:2AM페이지 4 REMOTE AMP WITH ZONE SELECTOR Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
RM-05A_E2010.3.249:2AM페이지 5 REMOTE AMP WITH ZONE SELECTOR Installation Environment Never place this product in an environment which could alter its performance or reduce its service life. Such environments usually include high levels of heat, dust, moisture, and vibration. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.
RM-05A_E2010.3.249:2AM페이지 6 REMOTE AMP WITH ZONE SELECTOR Features - SPEAKER LINE CONTROL Speaker zone of PAM-240A/360A, PCT-610/620 can be controlled by RM-05A. - CHIME AND TALK FUNCTION There are 4 levels of chime in PAM-240A/360A, PCT-610/620 which can be triggered by Chime/Talk Switch, and after chime is finished, announcement from mic will be made while pushing switch button. - OUTPUT LEVEL METER 10 segments LED display on the front panel indicates signal output level of RM-05A at real time.
RM-05A_E2010.3.249:2AM페이지 7 REMOTE AMP WITH ZONE SELECTOR Front Panel 1. MICROPHONE INPUT CONNECTOR The CMC-01 gooseneck is connected via the XLR connector. 2. MICROPHONE LEVEL CONTROL Turn clockwise to increase and counter clockwise to decrease the microphone volume level. 3. POWER SWITCH Switches ON and OFF the microphone unit. 4. OUTPUT LEVEL METER Indicates the signal output level between –20dB and +10dB. 5. ZONE/CHANNEL LED INDICATOR Visual indication of the selected channel.
RM-05A_E2010.3.249:2AM페이지 8 REMOTE AMP WITH ZONE SELECTOR 6. ZONE/CHANNEL SELECTION SWITCH Allows any combination of CH1-CH5 to be selected for broadcast of voice messages. 7. POWER LED Indicates that power is present at the microphone unit. 8. CHIME/TALK SWITCH LED INDICATOR Indicates when the chime talk switch is pressed. 9. CHIME/TALK SWITCH Used to broadcast to the selected channels. A pre- announcement chime option is available by adjustment of the internal jumper settings.
RM-05A_E2010.3.249:2AM페이지 9 REMOTE AMP WITH ZONE SELECTOR Rear Panel 1. REMOTE CONNECTION CABLE CONNECTOR Used to connect the RM-05A to the host amplifier PAM-240A/360A, PCT-610/620.
RM-05A_E2010.3.
RM-05A_E2010.3.
RM-05A_E2010.3.249:2AM페이지 12 REMOTE AMP WITH ZONE SELECTOR Specifications - ELECTRICAL Output Level/Impedance ...........................................................................1V±200mV(max gain)/600Ω, BAL MIC Input Sensitivity/Impedance..........................................................................0.8mV/±0.3mV/600Ω, BAL Frequency Response......................................................................................................120Hz~18kHz, ±3dB THD ..........................
RM-05A_E2010.3.249:2AM페이지 13 REMOTE AMP WITH ZONE SELECTOR Service Procedures Ensure the problem is not related to operator error, or system devices that are external to this unit. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider.
RM-05A_E2010.3.
RM-05A_E2010.3.
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).