EOSP-622 Dual Zone Wireless Speaker User Manual TM commercial wireless audio
Thank You For Choosing Eos Wireless! We hope you will get much enjoyment from your wireless audio system. Please read the entire contents of this manual. It is filled with reference information that will allow you to get the most from your new Eos system. If you have any questions, please check our web site at pro.eoswireless.com/support or call us at 877-465-3927. Your Total Satisfaction – Eos Job #1 Congratulations on your purchase of the Eos Digital Pro Series Audio System.
Table Of Contents Contents Important Safety Instructions FCC Information Limited Warranty 4 5 6 Product Support 6 Wireless System Setup 7 Linking Procedure 7 Adding Additional Wireless Speakers/Receivers 7 Controls & Functions Wireless Speaker Operation 8 9 Channel Switch 9 Volume Control 9 Zone Switch 9 Link Button 9 IR Remote Control 9 Wireless Speaker Sleep Mode 9 Mounting Options 10 Wall Outlet Mounting 10 Wall Outlet Mounting on Inverted Outlets 10 Rem
A Consumer Guide to Product Safety Important Safety Instructions Please take the time to follow the instructions in this manual carefully. It will help you set up and operate your system properly and enjoy all of the advanced features. Please save this manual for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. Avoid prolonged exposure to direct sunlight. WARNING: Liquids can cause a failure and/or a fire hazard.
A Consumer Guide to Product Safety FCC Information Information about products that generate electrical noise if applicable, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A Consumer Guide to Product Safety Limited Warranty IntelliTouch warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1-year from date of original purchase in the United States. In order to validate your warranty, you must register your product by going on-line (pro.eoswireless.com/register), or by calling 877-465-3927 between Monday through Friday, 8:30AM to 5PM Pacific Time.
Set Up Wireless System Setup The Eos Pro Series Wireless Speakers can receive wireless audio from either the EOSP-500 Dual Zone Music Player with the EOSP-510 wireless transmitter card installed or from the EOSP-610 transceiver in the transmit mode. Transmitters are referred as TX in this manual and receivers as RX. Linking Wireless Transmitters & Wireless Speakers Before initial use, you must link the wireless transmitter (TX) with the wireless speakers.
Connections Controls & Functions Channel Switch Allows selection of Right, Left of Mono Audio output Volume Control Adjusts the local volume setting of the wireless speaker Zone Select Allows the selection of Zone 1 or Zone 2 output Link Button Used to link the wireless speaker with the transmitter Volume Controls Controls local volume of the wireless speaker Tone Controls Allows you to tune the speaker acoustics the type of music and the room acoustics Power Status LED Displays the Power status of t
Connections Wireless Speaker Operation Channel Switch The Wireless Speaker can be set to receive either Right or Left Channel audio or Mono audio from a stereo signal. Volume Control Master volume is set at the transmitter/source end. Local volume for each speaker can be adjusted either from the speaker or from the IR wireless remote control. The IR wireless remote control can also set the bass, treble and loudness of the speaker. Zone Switch The Wireless Speaker is Dual Zone.
Mounting Mounting Options Wall Outlet Mounting A unique design feature of the wireless speaker is that it can be plugged into a wall outlet for mounting. For added support a security wall bracket mount is included in the package. To use this bracket, see the diagram below. Wall Outlet Mounting on Inverted Outlets In instances where the wall outlet is upside down (grounding pin at the top of the outlet), the non-functional grounding pin on the wireless speaker can be removed by unscrewing it.
Mounting Mounting Options Wall Mounting The wireless speaker can be wall mounted using the optional swiveling wall mount speaker kit (EOSP-5). In wall mounting applications an ordinary extension cord can be used to provide power to the speaker. To mount using the swiveling wall mounting kit, see the diagram below. Complete intallation information can be found in the EOSP-5 instruction guide included with the wall mounting kit (EOSP-5).
TM commercial wireless audio 877-465-3927 www.eoswireless.
