converge Transmitter Transmisor Émetteur Receiver Receptor Récepteur Ampli ed Receiver Receptor Ampli cado Récepteur Ampli é User Manual Manual del utilizador Manuel d'utilisation TM wireless ™
Thank You For Choosing Eos Wireless! English We hope you will get much enjoyment from our wireless audio system. Please read the entire contents of this manual. It is filled with reference information that will allow you to get the most from your new Eos system. If you have any questions, please check our web site at www.eoswireless.com/support or call us at 877-465-3927. Your Total Satisfaction – Eos Job #1 Congratulations on your purchase of the Eos Digital Wireless Multi-Room Audio System.
Table Of Contents Safety Instructions 4 CE Information 5 About the Converge Transmitter 7 Computer USB Connection 7 AUX IN - Non USB Connection 8 AUX IN Connection 8 Stereo System - Non USB Connection 9 Stereo System/Amplifier Connection 9 Operation 10 Transmitting USB Audio 11 Linking With Eos Receivers 11 Controls and Functions 12 About the Converge Wireless Receiver 13 Powering up your Converge Wireless Receiver 13 Connecting to a Home Stereo System 13 Connecting to Powered
Important Safety Instructions Please take the time to follow the instructions in this manual carefully. It will help you set up and operate your system properly and enjoy all of the advanced features. Please save this manual for future reference. English WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. Avoid prolonged exposure to direct sunlight. WARNING: Liquids can cause a failure and/or a fire hazard.
A Consumer Guide to Product Safety FCC Information Information about products that generate electrical noise if applicable, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A Consumer Guide to Product Safety English Eos Wireless Products are designed and manufactured by: IntelliTouch 6370 Nancy Ridge Rd. #105 San Diego, CA 92121 Questions: Visit www.eoswireless.com Phone toll-free 877-465-3927 Warranty Your Eos digital Wireless Speaker system is covered by a one-year limited warranty. For details see the Eos Warranty section of this manual. To register your product, go online to: www.eoswireless.com/registration Technical Information Wireless specifications: 150 ft.
Converge Transmitter About the Converge Transmitter The Converge Transmitter can broadcast from virtually any audio source. The Converge Transmitter can be connected to a computer via USB, an external audio source such as an iPod/ iPhone, other digital media players or anything with a headphone jack. The Converge Transmitter can also be connected to a home stereo or home theater system.
Converge Transmitter AUX IN - Non USB Connection English By using the included power supply, the Converge Transmitter can function without connection to the USB port of a computer. An auxiliary audio source may be connected by plugging in the supplied stereo headphone cable to the jack on the Converge Transmitter marked AUX IN. The other end of the cable can be connected to the headphone jack of any external audio device. Input from the external audio source will be broadcast to all Eos receivers/speakers.
Converge Transmitter Stereo System - Non USB Connection By using the included power supply, the Converge Transmitter can function without connection to the USB port of a computer. A home stereo system may be connected by plugging in the supplied stereo headphone cable to the jack on the Converge Transmitter marked AUX IN. The other end of the cable can be connected to the headphone jack of the Stereo Receiver/Amplifier using a headphone jack adapter (not supplied).
Converge Transmitter Operation English Volume Settings Set the Volume on your computer or other external audio device AS WELL AS your software based audio program (iTunes, Real Player, Windows Media Player...) to the Maximum Volume Level. When using web based internet radio like Pandora, Last FM, YouTube... make sure that the Volume level is ALSO set to the Maximum Level.
Converge Transmitter Operation Transmitting USB Audio 1. Launch the audio application on your computer. 2. Set Volume level to the Maximum Output Level. 3. Select the play function from within the application.
Converge Transmitter Controls and Functions English POWER SOURCE LINK RANGE EXTENDER WiFi CO-EXISTENCE Power On/Off - Switches the power to the wireless transmitter on/off Source – Switches between USB sound input and auxiliary input Audio Out – Allows connection of powered desktop speakers Range Extender – Extends the transmission range of the Eos system. Use only if transmission problems occur. for more information see “Range Extender” section on page 22 of this manual.
Converge Wireless Receiver About the Converge Wireless Receiver The Converge Wireless Receiver is designed to connect to your main home audio system or to powered computer speakers. The Receiver features controls allowing you to control the play/ pause and track forward and back on iTunes and other software based media players. Powering up your Converge Wireless Receiver 1. Connect power supply to jack marked DC5V 2. Toggle on Power Switch on rear of receiver.
Converge Wireless Receiver Connecting to Powered Multi-Media/Computer Speakers English Using the provided “Y” cable, connect RCA cables to the rear of the Converge Wireless Receiver unit marked AUDIO out. 1. Plug the cable from the powered speakers into the jack on the end of the “Y” cable. 2. Switch the Receiver’s power switch ON 3. Turn the powered speakers ON and audio from the Converge Transmitter will begin playing. 4. Adjust the sound level from the powered speakers volume control.
Converge Wireless Receiver Controls and Functions Eng PREVIOUS TRACK NEXT TRACK PLAY/PAUSE Function Buttons When the Eos Converge Transmitter is connected to a computer, you can use the buttons on the Converge Wireless Receiver to control play/pause and track forward/back on iTunes and many other computer based music player programs.
Amplified Converge Wireless Receiver About the Amplified Converge Wireless Receiver English The Eos Converge Amplified Wireless Receiver is designed to be used as a stand-alone receiver in conjunction with bookshelf type speakers. Optionally, a powered sub-woofer can be connected to the receiver. Powering up your Converge Wireless Receiver 1. Connect power supply to jack marked DC24V 2. To power on the Amplified Converge Wireless Receiver, press the volume knob.
Amplified Converge Wireless Receiver Auxiliary Input The Eos Converge Amplified Wireless Receiver can also take direct audio input from the auxiliary input jack located on the front of the receiver. Auxiliary Audio Connection Using the supplied 3.5mm stereo cable, plug one end into the headphone jack of the desired audio source and the other end into the AUX IN jack located on the front of the receiver.
Amplified Converge Wireless Receiver Controls and Functions English PREVIOUS TRACK AUX IN NEXT TRACK PLAY/PAUSE VOLUME - PRESS TO POWER ON Power & Volume Control To power on the Amplified Converge Wireless Receiver, press the volume knob. The ring around the volume knob will illuminate as will the LED on the antenna mast.
Amplified Converge Wireless Receiver Controls and Functions Antenna LED Indicator Light The antenna on the Receiver is equipped with a blue LED that tells the operational status. • LED on solid = power on, linked with Converge Transmitter. • LED on blinking = power on, not linked with Converge Transmitter. Note: If there is no connection within one minute, the unit will enter a sleep mode and turn off the amplifier and the antenna LED.
Using Your Eos System Wireless Receivers/Speakers ID Settings English All Eos Converge Transmitters, Wireless Speakers and Receivers have the same ID setting. This is done so Receivers/Speakers will automatically link with any Converge Transmitter. The Converge Transmitter will link with the first 4 Wireless Receivers/Speakers that it detects.
Using Your Eos System Adding a Receiver/Speaker to a System with a Unique ID Once a unique ID is set on your Converge Transmitter, you will need to do the following to link additional speakers to your Converge Transmitter: Please note - this procedure is only necessary if you have set a unique ID for your Converge Transmitter. 1. Turn the power OFF on the Converge Transmitter 2. Turn OFF power to the Wireless Receivers/Speakers that you wish to link. 3. Turn the power ON on the Converge Transmitter 4.
Using Your Eos System Range Extender English The Range Extender Switch, located on the bottom of the Converge Transmitter, allows you to increase the effective range of the Eos Wireless System. Use this button only if you are having difficulty linking up your Wireless Receivers/Speakers. About Range Extender To maintain a solid, interference free link, the Eos system incorporates an advanced proprietary error correction scheme.
Warranty Limited Warranty IntelliTouch warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1-year from date of original purchase in the United States. In order to validate your warranty, you must register your product by going on-line (www.eoswireless.com), or by calling 877-465-3927 between Monday through Friday, 8:30AM to 5PM Pacific Time.
877-465-3927 www.eoswireless.
