Cut Sheet

16-Port Gigabit Ethernet PoE+ Switch

16 x PoE ports, IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE), Endspan,

Rackmount

Part No.: 560993

Save installation time and money with PoE.

The Intellinet 16-Port Gigabit Ethernet Rackmount PoE+ Switch (560993) is designed to

pass both data and electrical power to a number of PoE-compatible devices via standard

Cat5e or Cat6 network cables. Equipped with 16 Gigabit Ethernet ports, this switch can

power wireless LAN access points and bridges, VoIP phones, IP video cameras and more

while delivering network speeds of up to 1,000 Mbps.

Power over Ethernet 802.3at

The Intellinet 16-Port Gigabit Ethernet PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 30

watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional

power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power

supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported,

and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For

devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an

Intellinet PoE/PoE+ Splitter.

Extreme Throughput

With a backplane speed of 32 Gbps, there is plenty of performance available for your computers, servers and other

networking devices.

* Total PoE budget for this switch is 220 watts.

Features:

Provides power and data connection for up to 16 PoE network devices

Saves time and money by delivering data and power via existing network cables

10/100/1000 auto-sensing ports automatically detect optimal network speeds

IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports

Power output up to 30 watts per port*

PoE power budget of 220 watts

Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access

points, VoIP phones, IP cameras)

Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage

protection

All RJ45 ports with Auto-MDIX (auto uplink) support

Store and forward switching architecture

IEEE 802.3x flow control for full duplex

Supports up to 8192 MAC address entries

For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.

All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and

reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.

PAGE 1
6-Port Gigabit Ethernet PoE+ Switch 16 x PoE ports, IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE), Endspan, Rackmount Part No.: 560993 Save installation time and money with PoE. The Intellinet 16-Port Gigabit Ethernet Rackmount PoE+ Switch (560993) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables.
PAGE 2
56 kBytes buffer memory Two high-volume cooling fans ensure perfect ventilation Includes 19" rackmount brackets Three-Year Warranty Specifications: Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3ab (Twisted Pair Gigabit Ethernet) • IEEE 802.3af (Power over Ethernet 802.3at Type 1) • IEEE 802.3at (Power over Ethernet 802.3at Type 2) • IEEE 802.3u (100Base-TX Fast Ethernet) • IEEE 802.
PAGE 3
Package Contents • 16-Port Gigabit Ethernet PoE+ Switch • Power cable • User manual • 19" mounting brackets For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com. All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.