Product Card

ManualsBrandsIntel Wi-Fi 6E AX211 ManualsElectronicsIntel Wi-Fi 6 AX211

Table Of Contents

Intel® WiFi Adapter Information Guide

This version of Intel® PROSet/Wireless WiFi Software is compatible with the adapters listed below. Note that newer

features provided in this software are generally not supported on older generations of wireless adapters.

The following adapters are supported in Windows* 10:

Intel® Wi-Fi 6E AX211

Intel® Wi-Fi 6E AX210

Intel® Wi-Fi 6 AX203

Intel® Wi-Fi 6 AX201

Intel® Wi-Fi 6 AX200

Intel® Wi-Fi 6 AX101

With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internet

connection. All these features can be explored using a WiFi network in your home or office. This WiFi network

solution is designed for both home and business use. Additional users and features can be added as your networking

needs grow and change.

This guide contains basic information about Intel adapters. Intel® wireless adapters enable fast connectivity without

wires for desktop and notebook PCs.

Depending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g,

802.11n, 802.11ac and 802.11ax wireless standards. Operating at 2.4GHz, 5GHz or 6GHz frequency, you can now

connect your computer to existing high-speed networks that use multiple access points within large or small

environments. Your WiFi adapter maintains automatic data rate control according to the access point location and

signal strength to achieve the fastest possible connection.

Information in this document is subject to change without notice.

Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any

commitment to update the information contained herein.

IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:

Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all

necessary local and governmental regulatory agency requirements for the regions that they are designated and/or

marked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars,

satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, and

limit usage to avoid interference with these devices. In many instances Intel is required to provide test data to prove

regional and local compliance to regional and governmental regulations before certification or approval to use the

product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control

parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include,

without limitation, RF power, spectrum usage, channel scanning, and human exposure.

For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format

with the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, or

code with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches,

utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will be

solely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under any

theory of liability for any issues associated with the modified products, including without limitation, claims under the

warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist

in providing support to any third parties for such modified products.

Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others.

Summary of content (9 pages)

PAGE 1
Intel® WiFi Adapter Information Guide This version of Intel® PROSet/Wireless WiFi Software is compatible with the adapters listed below. Note that newer features provided in this software are generally not supported on older generations of wireless adapters.
PAGE 2
Regulatory Information This section provides regulatory information for the following wireless adapters: Intel® Wi-Fi 6 AX200 Intel® Wi-Fi 6 AX201 Intel® Wi-Fi 6 AX203 Intel® Wi-Fi 6E AX210 Intel® Wi-Fi 6E AX211 Intel® Wi-Fi 6E AX101 NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above.
PAGE 3
INFORMATION FOR THE USER Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use Warning: The wireless adapter is not designed for use with high-gain directional antennas.
PAGE 4
REGULATORY INFORMATION USA - Federal Communications Commission (FCC) This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 and 5.470 to 5.75GHz frequency ranges. No configuration controls are provided for Intel® wireless adapters allowing any change in the frequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCC rules. - Intel® wireless adapters are intended for installation by OEM integrators only.
PAGE 5
Modular Regulatory Certification Country Markings The following regulatory IDs must be included on host labeling for systems incorporating an Intel® wireless adapter, in compliance with local regulations. Host system must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.
PAGE 6
Intel® Wi-Fi 6E AX210 (AX210NGW) FCC ID: PD9AX210NG IC: 1000M-AX210NG Intel® Wi-Fi 6E AX210 (AX210D2W) Due to the very small size of the AX210D2W, the marking has been placed in this user manual because the product label on the device is considered too small to be readable.
PAGE 7
INFORMATION FOR OEMs and HOST INTEGRATORS The guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters in notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions of compliance with FCC rules, including RF exposure.
PAGE 8
Antenna Placement Within the Host Platform To ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed in notebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operating modes and orientations of the host platform, with strict adherence to the table below. The antenna separation distance applies to both horizontal and vertical orientation of the antenna when installed in the host system.
PAGE 9
Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, 802.11ad and 802.