GOPAC Docking Station and Amplifier User Manual M13-0002-00A - REV D.3 Nucomm Inc. 101 Bilby Road Hackettstown, NJ 07840 Tel: 908-852-3700 Fax: 908-813-0399 www.Nucomm.
GoPac CAUTION! RISK OF ELECTRICAL SHOCK. DO NOT REMOVE COVERS. • • • • Do not remove any covers. Refer servicing to qualified technicians only. Disconnect all power before servicing. Read and perform all instructions carefully. Failure to follow suggested instructions and guidelines may void all warranties. FCC STATEMENT This equipment has been tested and found to comply with Part 74.637 (a) (2) of the FCC Rules and Regulations.
GoPac Proprietary & Disclaimer Notice All information and graphic images herein contained within this manual are considered the sole property of Nucomm, Inc. and is issued in the strictest of confidence. This material may not be reproduced, stored, copied, or converted in any form, nor shall it be disclosed to others or used for manufacturing or any other purpose without the written permission of an authorized representative of Nucomm, Inc. Nucomm, Inc.
GoPac Field Service Nucomm products are designed with easy access to components to facilitate service. However, to prevent voiding of the Nucomm warranty that protects the equipment, please contact Nucomm before servicing or making any repairs. When troubleshooting, the user is cautioned to read all module descriptions in this manual. Some Nucomm modules cannot be serviced in the field. Warnings are included in the circuit descriptions and on certain modules themselves.
GoPac Equipment Returns If equipment cannot be successfully restored through telephone consultation, the equipment may be returned to the factory for repair. Loaner equipment is often available until Nucomm is able to return the repaired unit(s). For out-of-warranty equipment only: Nucomm evaluates all returned units, and then confers with the client on corrective action. If no fault is found, or no corrective action is authorized, a diagnostic fee may be charged.
