User's Manual

@@
PXOO7
~1
The PXOO7 Proximity Card Reader has a slim door
style mountable design to match any decor. The
buried LED's and buzzer allow the PXOO7 Readers to
be mounted indoors and out. The PXOO7 Reader
Family accepts 4.75 to 14.25 Volts DC. The output
formats like clock-and-data magstripe (ABA /
ISO7811 ), Wiegand and a number of other formats
are determined by the personalization of the card and
are emitted without customizing the Reader. The 5
Volt DC capability allows the replacement of older
reader systems without rewiring or pulling new cables.
The PXOO7 Family offers high reliability, consistent
read characteristics and low power consumption.
Within the PXOO7 Proximity Reader Family also
models with a RS232/RS422/RS485 interface are
available for read and write operations.
The PXOO7 Proximity Card Reader Family supports
both the 125KHz and 13.56MHz technologies.
Different models are available for EM4002, EM4050,
HiTAG1 and 2, Mifare and I.Code silicon. Standard
capabilities include Host system controlled red and
green LED's and a buzzer. The PXOO7 Reader Family
can be mounted on any surface without relevant
performance degradation.
Integrated Engineering is committed to bring
non-propriety, open Radio Frequent Identification
(RFID) systems to the market demonstrated with the
PXOO7 Proximity Reader Family.
Specifications
Typical read range with an ISO Card
PXO07BZ/HX HiTAG1, 2 5- 10 cm
PXO07AZ EM4002, EM4050 5- 10 cm
PXO07Z/MF Mifare 2 -3 cm
PXO07Z/MFSNR Mifare serialnr. 2- 5 cm
PXO07Z/ICSNR I.Code serialnr. 5- 15 cm
Power Supply
4.75- 12.25 Volt DC
Current requirements
Average 50 mA
Peak 100 mA
Interface
Inputs EMC Prot. 10Kohm pull-ups
Outputs EMC Prot. open drain 0.5 A/max
Dimensions
140 x 46 x 22 mm
Material
Black ABS housing with polyurethan potting
Operating temperature
-20° to 60° C
Certifications
EN50022, CE, FCC
Cable Distance
25 meter. Recommended cable 8 x 0.35 conductor
stranded overall shield or equivalent.
Features
Mullion mounting
The PXOO7 Readers are designed to be unobtrusive
and can be mounted on a door mullion.
Indications
When a proximity card is decoded successfully the
with the card associated code is send to the Host
system, the red LED flashes and the buzzer sounds a
short 3KHz beep. Both LED's and the buzzer are also
controllable by the Host system.
Connections
The PXOO7 Reader Family has a flexible and reliable
connector interface. The space for the cable and the
connector within the PXOO7 housing can be poured
with silicone to withstand harsh environmental
conditions.
Interface Coding
The PXOO7 Reader Family can operate with any
facility, system or card coding scheme. The output
format, contents and length are determined by the
personalization of the card. Output formats like
magstripe, Wiegand and several others are available.
Security
Depending on the model and the silicon used the
PXOO7 Reader Family offers high security challenge
response schemes to protect the RFID air interface
against simulations of cards.