kSmart auto Wireless CarPlay Fa c to r y d i re c t s a l e s N o n - d e s t r u c t i ve i n s t a l l a t i o n Original car upgrade Continuous upgrade ser vice · · · · kSmart auto Wireless CarPlay & Android Auto Smart Module Product Manual For Mercedes Benz NTG5.
1.
. Connection Diagram 2.
. Main Parameters & Specifications 6. Interface introduction Operating voltage:9-16V,14.
7. Installation Process Tools you need to prepare 1. 1 * panel remover 2. 1 * T20 screwdriver 3. 1 * T10 screwdriver(some car models need it to dis-assembly the glovebox) 4. Tape and towel-protect the trim and panel, collect harness Remark : Make Sure Car Engine Off Before The Installation. Open/Close The Driver Side Door ONCE, Wait Centre Screen Turns Black 1. Remove the silver panel on the control board 2. Remove the two screws under the solver panel 3.
Knob control system APP Return 8. Button description 9. Wireless CarPlay Connection Method Control system volume Wake up Siri after setting *Answer the phone *Wake up Siri Car Audio_6006 VOL Car Audio_135C Buletooth Video AV in Setting DYNAMIC 1. Long press the phone-ending button of the original car to switch to the CarPlay main system interface, find the Bluetooth function option and click to enter OFF P A OFF 2. Check the Bluetooth name of CarPlay on the "Bluetooth" system interface 3.
11. iPhone Wireless Mirroring 10. Android auto Connect Method Car Audio_6006 Before connecting to use Android Auto,you need to download and install Android Auto App on your phone in advance Buletooth Video AV in Setting Car Audio_6006 Car Audio_153C 1. Long press the phone-ending button of the original car to switch to the CarPlay main system interface, find the Bluetooth function option and click to enter 2.
12. Android Wireless Mirroring Buletooth 1. To use Android wireless mirroring, you need to download a "MLink" software first, and you can obtain the "Android wireless APK software" from the dealer Video AV in Setting 2. Long press the phone-ending button of the original car to switch to the CarPlay main system interface, find the Bluetooth function option and click to enter 3. Check the Bluetooth name on the "Bluetooth" system interface Select AP band 7.
14. Echo cancellation 13.
15.
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.