User's Manual

현대카드_보조배터리_설명서_영문
1. Press the power button on the side of the product to keep the
battery charged in the auxiliary battery. You can check it out.
2. You can charge the auxiliary battery by connecting a cable to the input
/output terminal or charge electronic devices such as a smartphone or tablet.
3. Place a device that supports wireless charging on the wireless charging unit
at the top of the product. You can charge it.
4. Press the power button twice in a row to turn off the power.
Product description Product specification
Precautions
How to use product
1. To preserve the battery life, it must be used and charged at least once every three months.
2. If you use it at temperatures higher or lower than -10°C to 40°C, the product may be damaged.
Battery life can be shortened.
3. If you use it in hot and humid places for a long time, damage to products such as battery
deformation, fire, explosion, etc. A fire may occur.
4. Keep it out of reach of children or pets.
5. Be careful not to use the damaged charging cable.
6. For high-speed charging, you should use the provided charging cable or a cable
that supports high-speed charging.
7. Wireless charging is possible only when the auxiliary battery and the device are in contact
with the center.
8. Do not place magnet or metal objects on the wireless charging unit.
It causes overheating and malfunction.
9. If a credit card or information storage medium is placed close to the wireless charging unit,
the storage information will be stored. It can be damaged.
10. If you use a thick case or a metal cell phone case,
Charging may not be smooth.
11. Do not arbitrarily disassemble, modify, or repair the product.
12. Do not use the product near flammable substances such as curtains, carpets, blankets, etc.
13. After completely discharging the product at the end of its life, separate it into
the waste cell box to prevent it from being incinerated.
4000mAh BATTERY
CMO_05_BA
85.5*54.0*20.0 mm / 108g
ABS
4,000 mAh
9V/1200mA, 10.8W
9V/1200mA, 10.8W
Inteco.
INTECO(Dongguan) Trading Co., Ltd.
2021.11
China
Product name
Model No.
Size / Weight
Material
capacity
Rated input
Rated output
Importer
Manufacturer
Manufacture Y/M
Country of origin
Power buttonInput /
Output port
LED indicator
Wireless charging area
전면
후면
1:1.58 4000mAh BATTERY
USER MANUAL
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules. Operation is
Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not explicitly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
Note: this equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 18 of the FCC Rules. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
● Increase the separation between the equipment and any other radio device.
●
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.