Bedienungsanleitung IN-9408 2K+ IP / NETWORK KAMERA Serienmodelle: IN-9406 2K+ IN-9409 2K+ IN-9016 2K+ www.instar.com - Sony STARVIS 4MP WQHD-Bildsensor - Benutzerfreundliche und moderne HTML5-Weboberfläche (WebUI) - Unterstützt alle modernen Webbrowser (Edge, Firefox, Chrome, Safari, etc.
Inhaltsverzeichnis 1. Vorstellung der Kamera 2-DE 2. Sicherheitsvorschriften 3-DE 3. Produktmerkmale 4-DE 4. Aufbau der Kamera 5-DE 6. Smartphone Apps 10-DE 7. Fernzugriff 11-DE 8. Zurücksetzen der Kamera 12-DE 9. Objektivjustage 13-DE 10. Online-Material 14-DE 11. INSTAR Cloud 15-DE 12. Technische Daten 16-DE 13. Garantie & Entsorgung 17-DE 14. Rechtliche Informationen 18-DE 5. Installation 1-DE 9-DE Gehen Sie auf https://install.instar.
1. Vorstellung der Kamera Die IN-9408 2K+ ist die neueste wetterfeste WQHD-Außenkamera von INSTAR. Mit einem eingebauten passiven Infrarot-Bewegungsmelder (PIR) und vier softwareseitig separat einstellbaren Alarmbereichen, die mit dem PIR verknüpft werden können, verhindert dieses Kameramodell Fehlalarme und benachrichtigt Sie nur, wenn ein richtiger Alarm ausgelöst wurde.
2. Sicherheitsvorschriften Bitte lesen Sie die Sicherheitsvorschriften aufmerksam durch und bewahren Sie diese an einem sicheren Ort auf • Achten Sie darauf, dass sich das Stromkabel auf keinen heißen bzw. sich aufheizenden Flächen befindet. • Das Strom- und Netzwerkkabel bitte so verlegen, dass es nicht möglich ist, sich daran zu verletzen.
3. Produktmerkmale Hardware Bildsensor WQHD Sony STARVIS CMOS-Sensor / Auflösung 2560 x 1440px Weitwinkel Austauschbares 4,3mm Objektiv mit ~90º diagonalem Blickwinkel MicroSD-Karte Max. 128GB (32GB incl.
4. Aufbau der Kamera 4.1. Verpackungsinhalt 32 GB micro SD Kamera Halterung Dichtungsringe 32GB MicroSD Schrauben / Dübel Inbusschlüssel Netzteil Netzwerkkabel Antenne Folgende Teile sind im Lieferumfang enthalten 4.2. Kameraaufbau A 1-Kabel 1 2-Kabel 2 3 A 6 A 5-DE 7 8 9 10 11 3-Kabel 4 12 14 5 15 13 17 15 16 Gehen Sie auf https://install.instar.
01 - Infrarot-LEDs 5 High-Power IR-LEDs (Nachtsicht @ 850nm) und 2 schaltbare Status LEDs (Blau und Rot, s. Beschreibung unten) 02 - Objektiv Weitwinkel (Brennweite: 4,3mm / Blickwinkel: ~ 90º dia.) 03 - Helligkeitssensor Dämmerungsschalter für IR-LEDs 04 - PIR-Wärmesensor Integrierter passiver Panasonic Infrarot-Bewegungsmelder 05 - Mikrofon Für Geräuscherkennung, Audioaufnahme u.
4.4. Wetterfester Verschluss 1. Verschluss 3. 2. Dichtung Verschraubung Dichtungsringe Dichtungsring innerhalb des Verschlusses Abdichtung mit der Verschraubung LAN/WLAN-Kamera PoE-Kamera Bei Anbindung über WLAN (Nur Netzteil wird benötigt) Bei Anbindung per PoE (nur das LAN-Kabel benötigt) Anbindung per LAN u. Netzteil (Netzteil- & Netzwerkkabel) WLAN und Lautsprecher (Netzteil- & Lautsprecherkabel) Anbindung per LAN & Netzteil (Netzwerkkabel & Netzteil) Bei Anbindung per LAN inkl.
4.5. Halterung Lösen Sie die Schrauben gegen den Uhrzeigersinn, um die Halterung so in die gewünschte Position auszurichten. Anschließend ziehen Sie die Schrauben wieder fest. 72° 360° 360° 360° 72° 72° Gehen Sie auf https://install.instar.
5. Installation Halten Sie sich für die Erstinstallation bitte an die folgenden Schritte: Schritt 1 Bitte öffnen Sie den Webbrowser und gehen Sie auf: https://install.instar.
6. Smartphone Apps INSTAR bietet kostenfreie Apps für Android, iOS (iPhone / iPad), Windows Phone, Blackberry, AmazonKindle und Windows 10 / 11 (Metro). Um die App zu installieren, suchen Sie bitte nach “InstarVision“ im App Store Ihres Gerätes.
7. Fernzugriff Die Kamera unterstützt zwei Wege, um sich über das Internet von fast überall auf der Welt das Live-Video anzuschauen. 7.1. P2P-Protokoll Das P2P-Protokoll ermöglicht Ihnen, sich durch Verwendung unserer App InstarVision schnell und einfach mit Ihrer Kamera zu verbinden. Die Verbindung funktioniert mit jedem Internetanschluss (lokalen und öffentlichen IPv4/6 sowie mobilen LTE, 3G, etc. Anschlüssen), da keine Portweiterleitung benötigt wird.
8. Zurücksetzen der Kamera Um die Kamera auf Werkseinstellungen zurückzusetzen gehen Sie wie folgt vor: 1. Lösen Sie die vier Schrauben auf der Rückseite des Gehäuses. (siehe Abb.1) 2. Innerhalb der Kamera sehen Sie dann rechts neben dem MicroSD-Karten-Einschub einen kleinen schwarzen Druckknopf. Halten Sie diesen Druckknopf für 20-Sekunden gedrückt. Sobald Sie den Druckknopf loslassen, wird die Kamera auf Werkseinstellungen zurückgesetzt. (siehe Abb. 2) 3.
9. Objektivjustage Das Objektiv der IN-9408 2K+ hat eine Tiefenschärfe (auch Schärfentiefe genannt), die werksseitig auf ca. 10-15m eingestellt wurde. Sofern der Bereich, den Sie überwachen möchten, unscharf ist, müssten Sie das Objektiv justieren. Schieben Sie die obere Abdeckung nach vorne von der Kamera herunter und lösen Sie die vier Schrauben an der Vorderseite der Kamera. Nehmen Sie vorsichtig den vorderen Teil des Gehäuses ab und legen Sie diesen zur Seite.
10. Online-Material 10.1. Online-Anleitung Die Bedienungsanleitung ist eine gedruckte Version. Es werden Software-Features und Funktionen vom Tag des Drucks (November 2021) beschrieben. Da wir die Kameras stetig erweitern, gehen Sie bitte immer auf unsere Online-Anleitung https://manual.instar.de Die Online-Anleitung erklärt Ihnen viele wichtige Themen, um Ihre Kamera besser zu nutzen. Darunter fallen z.B. folgende Themen: 1. Wie verwendet man den DDNS-Service 2.
11. INSTAR Cloud https://cloud.instar.de Was ist die INSTAR Cloud? Die INSTAR Cloud ist ein rein optionaler und kostenpflichtiger Service, um Ihre Aufnahmen sicher aufzubewahren. Testen Sie die INSTAR Cloud jetzt kostenfrei für 30 Tage unter https://cloud.instar.de. Die INSTAR Cloud kostet in etwa 1/3 von dem, was andere Anbieter verlangen. Wenn man mit einer Speichereinheit von 10GB für eine Kamera plant (es lassen sich ca.
12. Technische Daten Bildsensor Sensor 1/3” WQHD Sony STARVIS IMX335 CMOS Sensor Objektiv f = 4,3mm; F/1.6 (IR Linse) / M12 - S-Mount Blickwinkel ~90° Diagonal Videoeigenschaften Videokodierung h.265 / h.264 high, main and baseline / MJPEG Video-Bildwiederholungsrate Bis zu 25fps Unterstützte Auflösungen 2560x1440, 1920x1080 und 680x360 Pixel Drehen / Spiegeln des Bildes Horizontal / Vertikal Videoparameter Helligkeit / Kontrast / Sättigung / Belichtung...
13. Garantie & Entsorgung 13.1. Garantie INSTAR gewährt auf seine Produkte eine zweijährige Bring-In-Garantie. Innerhalb dieser Zeit haben Sie, nach Absprache mit dem Kundensupport, die Möglichkeit, Ihr Gerät zu einer kostenlosen Reparatur einzuschicken (die Rücksendekosten werden durch den Käufer getragen). Davon ausgeschlossen sind Geräte, bei denen absichtlich fremde oder falsche Firmware aufgespielt wurde. Die Garantie umfasst lediglich Defekte an der Hardware des Gerätes.
14. Rechtliche Informationen Hersteller: INSTAR Deutschland GmbH Auf der Hostert 17, 65510 Hünstetten, Germany info@instar.com https://www.instar.com CE-Konformitätserklärung Hiermit erklärt die INSTAR Deutschland GmbH, dass sich dieses Produkt in Übereinstimmung mit den grund legenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 2014/53/EU befindet. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://www.
schädliche Störungen des Funkverkehrs verursachen. Es gibt jedoch keine Garantie dafür, dass bei einer bestimmten Installation keine Interferenzen auftreten. Wenn dieses Gerät schädliche Interferenzen beim Radio- oder Fernsehempfang verursacht, was durch Ein- und Ausschalten des Geräts festgestellt werden kann, wird dem Benutzer empfohlen, zu versuchen, die Störung durch eine oder mehrere der folgenden Maßnahmen zu beheben: -- Richten Sie die Empfangsantenne neu aus oder verschieben Sie sie.
Gehen Sie auf https://install.instar.
INSTAR Deutschland GmbH Ihr Spezialist für Netzwerk- und Sicherheitstechnik
USER MANUAL IN-9408 2K+ IP / NETWORK CAMERA Series Models: IN-9406 2K+ IN-9409 2K+ IN-9016 2K+ www.instar.com - Sony STARVIS 4MP WQHD Image Sensor - User-friendly and modern HTML5 web user interface (WebUI) - Supports all modern web browsers (Edge, Firefox, Chrome, Safari, etc.) - Supports MicroSD cards (max.
Table of Content 1. Camera Introduction 2-EN 2. Safety Warnings 3-EN 3. Product Features 4-EN 4. Camera Structure 5. Installation 5-EN 9-EN 6. Smartphone Apps 10-EN 7. Remote Access 11-EN 8. Camera Reset 12-EN 9. Lens Adjustment 13-EN 10. Online Material 14-EN 11. INSTAR Cloud 15-EN 12. Technical Data 16-EN 13. Warranty & Disposal 17-EN 14. Legal Information 18-EN 1-EN Go to https://install.instar.
1. Camera Introduction The IN-9408 2K+ is the newest WQHD PIR Outdoor IP Camera from INSTAR. With a built-in state-of-the-art Panasonic passive infrared (PIR) motion sensor and four separately configurable alarm areas that can be linked together, the camera prevents false alarms and notifies you only when a real alarm has been triggered.
2. Safety Warnings Read the safety warnings carefully and keep them in a safe place. • Make sure the power cord is not near any hot or heating up surfaces. • Place the power and network cable properly to prevent injuries. • This device shall not be used by people (including children) with limited physical, sensory and mental capabilities. Only a trained person who knows how to use the device carefully should use it. • Children should be supervised in order to ensure they do not play with the device.
3. Product Features Hardware Image Sensor WQHD Sony STARVIS CMOS Sensor / Resolution 2560 x 1440px Wide-Angle Lens Exchangeable 4.3mm lens with a ~90º diagonal field of view MicroSD Card Max. 128GB (32GB incl.) for alarm or manual recording (15 sec.) PIR Sensor Integrated Panasonic passive infrared motion detector Mic / Audio Out Integrated microphone and audio output (3.
4. Camera Structure 4.1. Delivery Content 32 GB micro SD Camera Bracket Sealing Rings 32GB MicroSD Screws & Dowels Allen Key Power Adaptor LAN Cable Antenna Delivery contents in the camera package 4.2. Camera Structure A 1-cable 1 2-cables 2 3 A 6 A 5-EN 7 8 9 10 11 3-cables 4 12 14 5 15 13 17 15 16 Go to https://install.instar.
1 - Infrared LEDs 5 high-powered IR LEDs (nightvision @ 850nm) and 2 switchable status LEDs (blue and red, see description below) 2 - Lense Wide-angle (focal length: 4.3mm / field of view: ~ 90º dia.) 3 - Photosensor Twilight switch for IR LEDs 4 - PIR Detector Integrated Panasonic passive infrared (PIR) motion detector 5 - Microphone For noise detection / audio rec. / two-way audio intercom 6 - Audio Output 3.
4.4. Weatherproof Screw Set 1. Screw Head Rubber-joint 2. Rubber-joint 3.
4.5. Bracket Loosen the screws counter-clock wise in order to align the bracket to the desired position. Once the camera is positioned, please tighten the screws again. 72° 360° 360° 360° 72° 72° Go to https://install.instar.
5. Installation For installation, please simply follow the steps below: Step 1 Please open the web browser and go to: https://install.instar.com to open the Camera Installation Guide. Step 2 Choose your language and camera model IN-9408. Step 3 Select the type of network connection: a) Connection via LAN cable (recommended) b) Connection directly with WiFi via WPS (not for PoE version) Step 4 Follow each step of the installation process according to your choice.
6. Smartphone Apps INSTAR offers free apps for Android, iOS (iPhone / iPad), Blackberry, AmazonKindle, Windows Phone and Windows 10 / 11 (Metro). To install the app, please search for “InstarVision“ on the app store of your device. InstarVision Your APP STORE The Difference between the App and the Web User Interface (WebUI) App: The InstarVision app offers you an easy way to access your camera and view the livestream at any time in any place.
7. Remote Access The camera supports two ways to remotely access the live video from all over the world using internet connection. 7.1. P2P Protocol The P2P protocol provides you with a simple and fast way to connect and communicate with your camera, using our InstarVision app, available for all major platforms and devices. It works with any type of internet connection (local and public IPv4/6, mobile data like LTE, 3G, etc.) as no port forwarding is necessary.
8. Camera Reset In order to reset your camera, please follow the instructions below: 1. Loosen the four screws on the backplate of your camera and put it aside. (See. Fig.1) 2. You will find a small black reset button next to the MicroSD slot inside the camera. Keep pressing this reset button for 20 seconds. Once you release the button, the camera will start the reset process. (See Fig. 2) 3. After the reset, the camera will restart, which can take up to 60 seconds.
9. Lense Adjustment The IN-9408 2K+ standard lens has a depth of field (also focus range) that is adjusted to a distance of approx. 10 - 15m. In case your area of interest is out of focus, you will have to adjust the lens accordingly. Slide the top cover towards the front to take it off and loosen the four screws at the front cover of the camera. Carefully remove the front cover from the main casing and put it aside. Open the WebUI and check the live video.
10. Online Material 10.1. Online Manual This user manual is a printed version. Therefore it represents the specifications and software features from the date printed (November 2021). As we are constantly improving our cameras, please always refer to the up-to-date online manual: https://manual.instar.com The online manual offers you many important topics for using your camera. Below are some of the topics covered by the online manual: 1. How to use the DDNS address 2. How to set a port forwarding rule 3.
11. INSTAR Cloud https://cloud.instar.de What’s the INSTAR Cloud? The INSTAR Cloud is a purely optional and paid service to backup your recordings. Try the INSTAR Cloud free of charge for 30 days at https://cloud.instar.de. The INSTAR Cloud costs only about 1/3 of what other cloud platforms demand. If you are planning with a storage unit of 10GB for a camera (you can store about 1.000 alarm events on 10GB), you can even save up to ~ 70% in comparison.
12. Technical Data Image Sensor Sensor 1/3” WQHD Sony STARVIS IMX335 CMOS Sensor Lens f = 4.3mm; F/1.6 (IR Lense) / M12 - S-Mount Angle of View ~90° diagonal Video Properties Video Encoding h.265 / h.264 high, main and baseline / MJPEG Video Framerate Up to 25fps Supported Resolutions 2560x1440, 1920x1080 und 680x360 Pixel Flip / Mirror Image Horizontal / Vertical Video Settings Brightness / Contrast / Saturation / Exposure...
13. Warranty & Disposal 13.1. Warranty INSTAR offers a 2-year warranty on its products. During this period you can send in your camera for free repair (the shipping cost to our service center will have to be paid by the customer). This excludes cameras installed with custom-made or third party firmware and WebUIs which have not been approved by INSTAR. The warranty is limited to hardware parts of the camera. If you are calling our service team, please keep your model and serial number ready.
14. Legal Information Manufacturer: INSTAR Deutschland GmbH Auf der Hostert 17, 65510 Hünstetten, Germany info@instar.com https://www.instar.com CE-Declaration of Conformity Hereby, the INSTAR Deutschland GmbH, declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. The complete copy of the EU Declaration and Conformity can be found on this website: https://www.instar.
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement: The equipment complies with FCC Radiation exposure limit set forth for an uncontrolled environment.
Go to https://install.instar.
INSTAR Deutschland GmbH Your Specialist for Network and Security Equipments Go to https://install.instar.