Infrared LED 2-Lens photosensitive PIROGI Detector 5 Microphone 6 Audio Output 7 Network Port 8 Power Connector microcosm Card Slot 10-WAS / Reset 11 Status LED 12 Antenna ‘Connector 13 Antenna weatherproof Connector 15 Rubber-Joint. 18 Weatherproof Nut 5 high-powered IR LED {night vision @ 850nm) Wide-angle focal length: 4.3mm / fled of view: ~ 80° dia} Twilight switch for IR LED Integrated Panasonic passive Infrared (PIF) motion detector For noise detection / audit rec. / two-way audio intercom 3.
4.4. Weatherproof Screw Set Rubber-mountainside Tighten the nut to Screw head Head the screw head Rubber-joint LAN/WIFI Camera PoE Camera ZR For WIFI Connection For PoE Connection {Only power adapter necessary) | {Only Ethernet Gable needed) For LAN and Power #G\ | (Method Gable & Power Adsorption © For Wife Connection & Audio Output {Power adapter & audio cable) For LAN and Power (Ethernet Cable 8 Power Adapter) For LAN connection including power supply and audio-output © (Theme cable, power adapter & audi
5. Installation For installation, please simply follow the steps below: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Please open the web browser and go to: to open the Camera Installation Guide. Choose your language and camera model IN-8008 Select the type of network connection: a) Connection via LAN cable (recommended) b) Connection directly with WIFI via WPS (not for PoE version) Follow each step of the Installation process according to your choice.
6. Smartphone Apps INSTAR offers free apps for Android, iOS (iPhone / iPad), Blackberry, Amazon Kindle, Windows Phone and Windows 8.1 / 10 (Metro). To install the app, please search for “Instar Vision on your app store. Instar Vision eo Your APP STORE 5 McKay agonists The Difference between the App and the Web User Interface (Ebullient) App: The Instar Vision app offers you an easy way to access your camera and view the live stream at any time in any place.
7. Remote Access The camera supports two ways to remotely access the live video from all over the world using Interment connection. 7.1. P2P Protocol The P2P protocol provides you with a simple and fast way to connect and communicate with your camera, using our Instar Vision app, available for all major platforms and devices. It works with any type of Interment connection (local and public IPv4/6, mobile data like LTE, 3G, etc.) as no port forwarding Is necessary.
8. Camera Reset In order to reset your camera, please follow the Instructions below: 1. Loosen the four screws on the back plate of your camera and put It aside. (See. Fig.1} 2. You will find a small black reset button next to the Micros D slot Inside the ‘camera. Keep pressing this reset button for 15-20 seconds. Once you release the button, the camera will start the rests process. (see Fig. 2) 3. After the rests, the camera will restart, which can take up to 60 seconds.
9. Lens Adjustment The IN-8008 Full HD standard lens has a depth of field (also focus range) that is adjusted to a distance of approx. case your area of interest is out of focus, you will have to adjust the lens accordingly. Slide the top cover towards the front to take It off and loosen the four screws at the front cover of the camera. Carefully remove the front cover from the main casing and put asked. Open the Weblog and check the live video. Tum the lens, until your area of interest is in focus.