01 Photo sensor Twilight switch for IR LED 02-Lens Wide-angle (focal length: 4.3mm / flied of view: ~ 50° aid) 02 Infrared LED 10 IR LED {right vision @ 850nm) 04 PIR Detector Integrated passive Infrared motion detector 05 Loudspeaker Integrated loudspeaker 06 Micros D Lard Slot Slot for Microsecond cards max. 128GB 16GB included) 07 Microphone For knolls detection / audio rec. / two-way audio Intercom 08 Power Connector DG Plug @ : 1.5mm (in) / 3.
5. Installation 1. Please open the web browser and go to: to open the Camera Installation Guide. 2. Choose your language and camera model IN-8015 3. Select the type of network connection: a) Connection via LAN cable (recommended) b) Connection directly with WiFi via WPS (not for PoE version) 4. Follow each step of the installation process according to your choice 5. On the login page of your camera, please use the default login credentials: User Name: admin Password: instar 6.
6. Smartphone Apps INSTAR offers free Apps for Android, IOS (I Phone / IPad, Blackberry, Amazon Kindle, Windows Phone and Windows 8.1 / 10 (Metro). To Install the App, please search for “Installation” on your App Store. Instar Vision agonists The Difference between the App and the Web User Interface (Website) 1. App: The Installation App offers you an easy way to access your camera and view the Mainstream at any time In any place.
7. Remote Access The camera supports two ways to remotely access the live video from all over the world using Internet connection. 1. P2P Protocol The P2P Protocol provides you with a simple and fast way to connect and communicate with your camera, using our Interventionist app, available for all major platforms and devices. It works with any type of Interment connections (local and public IPv4/6, mobile data like LTE, 3G, etc.) as no port forwarding Is necessary.
8. Camera Reset In order to reset your camera {ff you forgot ‘your password), please press the small reset button at the rear of your camera for 15-20 seconds. Please make sure the camera Is connected to power while pressing the reset button. After the reset, the camera will restart which can take up to 60 seconds. After a resit, all data In the camera will ba set back to factory defaults, therefore use a network cable or WPS to reconnect the camera with ‘your network.