OWNERS MANUAL & ASSEMBLY INSTRUCTIONS v 1.
PARTS M6 x 40mm M4 x 25mm
ASSEMBLY INSTRUCTIONS STEP 1 STEP 2
ASSEMBLY INSTRUCTIONS STEP 3
ASSEMBLY INSTRUCTIONS STEP 4 Attaching the verlco of cover on the bottom of base
OWNERS MANUAL & ASSEMBLY INSTRUCTIONS v 1.
PARTS M6X40mm M4X25mm
ASSEMBLY INSTRUCTIONS STEP 1 STEP 2
ASSEMBLY INSTRUCTIONS STEP 3
ASSEMBLY INSTRUCTIONS STEP 4 Attaching the verlco of cover on the bottom of base
OWNERS MANUAL & ASSEMBLY INSTRUCTIONS v 1.
PARTS M6 x 40mm M4 x 25mm
ASSEMBLY INSTRUCTIONS STEP 1 STEP 2
ASSEMBLY INSTRUCTIONS STEP 3 Attaching the verlco of cover on the bottom of base
WARNING WARNING! • Due to the size of this bed we recommend assembling it in the room intended for use. • Check the packaging to make sure you have all the parts listed on this instruction. • Before use, make sure this bed is fully assembled. Do not over-tighten screws. • Do not use power tools to assemble this bed. Tools are not needed. • This product should be used only on firm, level ground. • Do not destroy the packaging until after the product is fully assembled.
WARRANTY 3 YEAR LIMITED WARRANTY Classic Brands Upholstered Beds are warranted for a five (3) year period from the date of purchase against defects in materials and/or workmanship. Unless there is a clear warranty issue, the Classic Brands Upholstered Beds are not returnable to Classic Brands. During this warranty period, if the product is deemed to be defective, our responsibility for the defective product is limited to replacement as stated below.