User's Guide

IC 3000 Wireless Pendant
Part# IC3000TX1
This Pendant is designed to operate with the IC 3000 Emergency Response / Medical Triage Console. The
Pendant is designed with two unique buttons. The large RED button allows a user to wirelessly trigger a
telephone call for help in cases of medical emergencies, accidents, etc. that happen at home. The second smaller
WHITE button with the blue medical symbol is used to place a call to a medical Triage center to ask medical
questions and receive personalized professional assessment.
IMPORTANT: The pendant is shipped with Emergency button disabled (shipping mode).
To enable the Emergency button see Section E.
A. Description of Pendant
1. Emergency Help Button
Pressing the RED button will
activate the console to dial
the emergency line and send an
Emergency Alarm report.
Red light flashing: Signal is
transmitted.
2. Nurse Call Button
Pressing the WHITE button will activate
the console to dial the Nurse line
Blue light flashing: Signal is transmitted.
3. Adjustable Lanyard.
B. Learning In Pendants
Follow the steps below for learning in pendant
Step 1. Press and hold the NURSE & CANCEL buttons on the console (approx. 5 sec.) until the
console emits a beep and STATUS LED illuminates PURPLE. Now the console is in
LEARNING MODE.
Step 2. Learn Pendant 1: press and hold the EMERGENCY button on the console.
Learn Pendant 2: press and hold the NURSE Button on the console.
Step 3. The status LED will indicate either Green (Zone available) or Red (Zone Occupied).
a. If the Status LED is GREEN this means that the Zone is available, press RED
pendant button to learn-in. The Status LED on the console will illuminate RED and
an audible beep will be heard.
b. If the Status LED is RED this means that the Zone is occupied, you may clear the
Zone by pressing the CANCEL button on the console until system emits a short beep
and the Status LED turns green. Go to Step 3a to learn in pendant.
9"19"2012&
Ver.&1.2&

Summary of content (2 pages)