User Operating Manual A712
Contents Contents ............................................................................................................................... - 2 1 2 3 4 5 6 7 8 9 Introduction ................................................................................................................................ 1 1.1 Acknowledgements .......................................................................................................... 1 1.2 Precautions ................................................
9.4 Date and Time ................................................................................................................ 31 9.5 Language and Input Method .......................................................................................... 31 9.6 About Tablet PC ............................................................................................................ 31 10 Installation and Management of Program ................................................................................
1 Introduction 1.1 Acknowledgements Many thanks for you choosing this product. The product belongs to MID(Mobile Internet Device), which is a kind of mobile internet device, delicate, small and exquisite, and also portable. It is also equipped with a piece of touch LCD of high definition, which can be used to watch vedios and pictures of high definition. It supports installation of multiple application programs on office and entertainment.
1.3 Safety Notice Before using MID, please read information in this section, and make your children learn about the information. About more detailed information, please refer to safety instructions and matters needing attention. Please don’t use MID when you are driving, for fear of hindering safe driving. In medical places, please observe relevant stipulations and regulations. And in regions near the medical devices, please shut down MID.
WIFI Wireless Fidelity Wireless Local Area Network based on IEEE 802.11b standard TF TransFlash Alternate name Micro SD, superminiature storage card 2 Brief introduction for MID product 2.
TF Volume key DC MIC Headphone Power on/off Figure 2-2 EM-R3170 underside view Rear camera Speaker TF Reset Figure 2-3 2.
Power adaptor USB connecting line Micro USB tieline Earphone (selective pairing) User’s manual 2.3 Use and preparation of MID Battery charging Before using MID for the first time, the battery must be charged firstly. Use power adaptor to charge MID. In order to guarantee full battery, please charge for over 4 hours. 2.
WIFI service is connected, netwrk is available Battery symbol Airplane mode Charging Notice panel Notice iconograph will show when receiving new message, setting the alarm clock and hodometer as well as inserting SD card, you can open the notice panel to check detailed information Unlock notice panel When new notice iconograph shows on the notice column, please press the notice column with your finger, then slide downwards to unlock the notice panel. 3 Quick start 3.
3.3 Unlocking and closing of the screen The machine will close automatically when the screen is left unused 1．After the screen being left unused for a period of time, the machine will close screen automatically, so as to save battery power. 2．Under screen on state, press the power key, the screen will close immediatey. Prompt: if you want to inquire how to set turn-off time of screen, please refer to chapter 9.1.
Drag Before you starting to drag, you must press it with your finger and impose a certain pressure, and don’t loosen the finger before draging to the wanted position. Rotate Aiming at most of pictures, only turn the MID in side direction, the screen direction can be shifted from cross direction to vertical direction. For example, when you input characters, watch cinema, etc. 3.5 Homepage interface All application programs on the machine will be displayed on the main menu screen.
Figure 3-3 Custom homepage interface Change desktop wallpaper 1. Press blank region on the homepage interface to pop up the menu. 2. When the menu popping up, choose source of homepage interface wallpaper you want to change. 3. After clicking source of wallpaper, click picture you want, and then select “setting wallpaper”.
Add widgets 1. Please click application program menu. As shown in Figure 3-5. 2. After entering application program menu, click “WIDGETS” button on the top left of interface. 3. After pressing the desktop widgets you want, the system will return back main interface, put the selected widget to the wanted place, then loose. Widgets Figure 3-5 3.6 Access to application program How to visit aplication program of MID: 1. Please click application program menu. As shown in Figure 3-5. 2.
Widget Application program Figure 3-6 3.7 USB connection Storage setting of MID Before transmitting document, you must set storage mode for your MID firstly: 1. Connect MID with computer by using USB transmission line. Notice bar will show the notice prompt. 2. Click status bar, options of status bar show. 3. Among options of status, click to choose USB connected, then click to open USB storage device. 4. At this time, USB has already been connected.
1. Connect MID and computer together with USB cable. 2. After setting according to storage of MID, connect with computer successfully. 3. Open your computer, in my computer, examine content in “removable disk (x)”. 4. Find the document you want to copy, copy it to “removable disk(x)”. 5. After completion of copying, click “safely remove hardware” in taskbar of your computer to unload. Content of MID storage device 1. NAND FLASH storage device, space for MID to store document itself. 2.
3.9 Character input Use screen keyboard When you start the program or select text edit box needing to input characters or numbers, screen keyboard will show. The following input methods are provided for the keyboard to select. 1. Android keyboard 2. Input method of a third party (user can install them by himself) Select the input method you need to use According to presetting, MID will display Android keyboard when you want to inut characters. 1.
1 Switch input capital and small letters 2 Switch character input mode and symbol/figure input mode 3 Click to insert space 4 Click to execute carriage return 5 Click and press on to delete characters on the left of the cursor 6 Click here to switch input method 3.10Application Technique Open the application procedure that is employed recently.
Click the Back Key to return to the superior interface, or click the Homepage key to return to homepage interface. Factory Default Whe your MD produces the major error or the unlocking password is forgetten, the Factory Default can be employed to return to the ex-factory status. There are two kinds of methods of setting the Factory Default: 1. On the homepage interface, click the menu key and pop up the setting menu. 2. Click and select the Setting 3. Click and select the Backup and Reset 4.
Click here and select WIFI network Advanced Wifi setting option Figure 5 Communication 5.
The E-mail application procedure is attached with the setting guide for E-mail, the external POP3 or IMAP E-mai account for common Web E-mail service provider ( such as: Yahoo, Gmail, Hotmail and163 manufacturers) can be added. Figure 5-1 Setting guide for E-mail 1. After clicking and selecting the E-mail icon, the produced E-mail setting guide will help you perfom the setting; 2. Click and select Next button; 3. Input E-mail address and password of your E-mail account; 4.
phoe. 1. Click and select the E-mail; 2. Enter into your inbox; 3. Click the menu key; 4. Click and select the Account; 5. Press the account that you want to delete. 6. Pop up the menu list; click and select the Deleted Account. 7. Click OK to remove it. Send E-mail information 1. Click and select the E-mail to show your inbox. 2. Click inbox to enter, automatically refresh the new e-mail, click and read it. 3. Press down the menu key and pop up the menu. 4.
AVI(H.264、DivX、XviD) RM/RMVB MKV WMV MP4 VOB FLV 3GP 6.2 Music Your music can be divided into such 4 types as Artist, Special Edition, Songs, Play List and Playing. select a classification to view the contents in the list therein. If enter into one classification, always perform the selection until appear the songs that you want to play. For example, if you select Artist classification, you will see the name list of artists ranked according to A-Z sequence.
Add the songs onto the new play list 1. Click and select the music; 2. Click and select the songs, 3. Press the songs that you will add onto the play list ; 4. Pop up the music setting menu, click and select add onto the play list. 5. Click and select the Newly-established; 6. Input the name of play list; 7. Click and select the Save; 8. Click and select certain song, serve this song as the ring to be added. Delete the play list 1. Click and select the music; 2.
Videotape function 1. Click the videotape icon and convert it as video recorder mode; 2. Click and select the red videotape button to take video ; 3. Set such setting functions as color effect, white balance and video quality; 4. Switch 720P and 480P high-definition videorecording. 5. Click and select the videorecording button, end the videorecording, and observe the previewed video. Figure 6-3 6.
Fig. 6-4 Edit and set the picture When view the pictures in full screen mode, press the Menu key to show the menu options, through which the pictures are edited and set. Slide show Press the Menu key to show the menu options, and then click Play slideshow, which shows the pictures in all folders. Share 1. Press the Menu key to show the menu options, and then click Share. 2. The picture will be shared with your friends through the attachments in the E-mail Rotation 1.
Fig. 6-5 7 Internet 7.1 Browser Enter Homepage The browser always opens the last web page that the user has visited, and the home page will appear after clicking the browser. Change your Home Page 1. Click Browser. 2. Press the Main menu button to pop up browser setting menu. 3. Click Settings. 4. Click Set Home page. 5. Enter URL and Click OK.
Address bar Browser menu Fig. 7-1 Visit web page 1. Click Browser. 2. Enter your URL in the address bar. 3. Click Start on the soft keyboard. Click here to add a web page as bookmark Input the contents that you want to search Click here to edit your browser Fig. 7-2 Click here to enter the Browse the webpage When the page finishes loading, you can slide your finger to browse and view other parts of the page.
Zoom in or zoom out webpages The webpage can be zoomed in or out by double-clicking the screen or by dragging through two fingers. Find texts within the webpage 1. While browsing the web, press the Menu key to pop up the menu options. 2. Click Find on web. 3. Enter the item you want to search. 4. The matched texts are highlighted in green while inputting the characters. 5. Click left-to-right arrow before the search bar to move to the previous or the next matched word.
Fig. 7-3 Use browser window Open a new browser window 1. In the browser window, press the Menu key and click New window or simply click the + at the top of the address bar to open a new window. Switch browser window 1. In the browser window, the pages you have visited appear above the address bar. 2. Click the window that you want to switch to the page you want. Set browser In the browser interface, press the Menu key and click Set to set the browser. 8 Other Applications 8.1 Alarm clock 1.
Fig. 8-3 8.3 File Management Browse files Slide the desktop to locate the File browser. You can use the file browser to manage, edit and delete the files and folders, or to create sharing and FTP server to achieve resource sharing. Fig. 8-4 Cut and copy files 1. In the file browser, press and select the file you want to operate. 2. Pop up operating menus, including Cut, Copy, Delete, Rename, Move to, Copy to, Play music, Select all, Set home directory and Attributes, etc. 3.
5. Click Operate and then click Paste. Delete files 1. In the file browser, press the file you want to delete. 2. Click Delete. 3. Click OK to delete file. Folder setup 1. In the file browser, pop up menu by pressing the Menu key. 2. Click Create. 3. Click Folder. 4. Click pop-up window and input the name of the new folder in the text box. 5. Click OK to create the folder. Quick search 1. In the toolbar of the file browser 2. Click Search icon. 3.
9 Basic Settings 9.1 Sound and Display Volume setting 1. Click the application icon to enter the settings application on the Homepage. 2. Click Sound. 3. Click Volume to control the volume of the ringtones, media, alarm clock and notification. 4. Pop up volume setup panel, and control it by dragging the progress bar to left or to right. Screen key tone and screen lock alert tone You can set the MID to emit sound when you use the soft keyboard or touch screen as well as lock the screen. 1.
You can set your own unlock pattern (equivalent to the password) to protect the privacy of your MID. 1. Click the application icon to enter the settings application on the Homepage. 2. Click Security. 3. Click Set screen lock. 4. Click Pattern. 5. Pop up unlock pattern panel with 9 contacts, at least four of which are connected vertically, horizontally or diagonally. Put fingers away from the screen upon completion and the system will record the pattern you set. 6. Click Continue. 7.
1. Click the application icon to enter the settings application on the Homepage. 2. Click Storage. 3. Click Uninstall SD card. 4. The system prompts that the SD card is safely removed. Tips: the uninstall method for Scsi is as described above. 9.4 Date and Time Adjust the date, time and time zone 1. Click the application icon to enter the settings application on the Homepage. 2. Scroll down the screen and then click the Date and time settings. 3.
Running time, etc. System Update 1. Click the application icon to enter the settings application on the Homepage. 2. Click About Tablet PC. 3. Click System Update. 4. If the window shows this is the latest version, there is no need to update. 5. If the window prompts to download the new version, click Download. (Ensure the device is equipped with the TF card before download, the system automatically downloads the update package into TF) View system version 1.
Uninstall applications 1. Click the application icon to enter the settings application on the Homepage. 2. Click Applications. 3. Click Management applications, and list all the applications installed in the system. 4. Click Uninstall. 5. Click OK to complete uninstall. 10.3Update Approach Update Android system applications Download the latest application from our designated websites. Download through the relevant forums about Android system software from the Internet.
6. Wait for system rebooting. 11.3System Upgrade Note: Before upgrading, ensure the MID electrical quantity maintains more than 30% for the upgrade completion. In addition, you also need to back up your important information, such as applications and e-mails. Upgrade steps: 1. Copy the needed system upgrade files to the TF root or to the RAR, which is named as update.zip in NAND storages. Note: the file name must be the mentioned one, if not, please manually change to this name. 2. Click Settings. 3.
12 Troubleshooting 1. slow initial boot for MID After system upgrade of MID, initial boot needs installation of the pre-installed software applications, and for about 2-3 minutes, it runs faster. 2. 3. MID can not be connected to WIFI Ensure that the wireless router providing the network services works properly. Ensure the MID and the wireless router are kept with certain distance, and between which no wall or other obstacles exist.
Appendix 1 Specification Product Parameter Type Basical parameter Product appearance Application Details MID model CPU type CPU speed DDR NAND FLASH Operating system version Network connections USB interface battery Power adapter External memory card Product form LCD Dimensions Weight Vedio Audio Games Input method photos Office software Descriptions EM-R3170 Rockchip RK3026, Dual Cortex-A9 1.0GHz 512M GB 4GB (8GB/16GB/32GB optional) Andriod 4.2 WIFI802.
FCC STATEMENT Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
