USER GUIDE
Contents Overview.........................................................4 Getting Started with the Vision MARK-1.....7 1. Charge the Device................................7 2. Turn ON the Device..............................7 3. Unlocking the Screen...........................8 4. Connect to Wi-Fi....................................9 5. Sign in to the Organization Portal with Insitucloud Account........11 6. Install a Materials App.......................12 7. Ready to Make Measurements.........
Overview The Vision MARK-1 performs rapid materials assessments on location and during materials use which allows for better control, helps to prevent materials defects, and improves overall quality in a manufacturing process. Note: In order to make materials measurement on the device, the Vision MARK-1 needs a specific Insight module and materials probe that correspond to the materials being measured.
Front LED Status Indicator (RYG) Insight Port Power Button Volume Control Charging Port 5
Back Lanyard Straps 6 Humidity Sensor
Getting Started with the Vision MARK-1 1. Charge the Device Before using the Vision MARK-1, plug in the power cord and fully charge it. 2. Turn ON the Device To turn ON the Vision MARK-1, press and hold the power button for a few seconds and you will see the Insituware logo appear on the screen.
3. Unlock the Screen To unlock the screen, swipe your finger up from the bottom of the screen. To lock the screen, press the power button once.
4. Connect to Wi-Fi From the Home screen tap the Settings app. Tap Network & Internet.
Toggle the button to turn Wi-Fi on, then select a listed network. Enter the network password (if applicable) to finish connecting to Wi-Fi.
5. Sign in to the Organization Portal with Insitucloud Account From the Home screen, tap the Organization Portal app. Log in with your Insitucloud credentials. Note: If you do not already have an Insitucloud account, tap the Sign Up tab in the Organization Portal app or go to portal.insituware.com to create an account.
Once logged in, select your Organization. 6. Install a Materials app In the Organization Portal app, under Applications select the Materials app you would like to install and tap Install. Note: If there is an app update, it will say Update instead of Install.
7. Ready to Make Measurements Now you are ready to make measurements with the Vision MARK-1! Note: For more information on using Materials apps, Insights, and probes with the Vision MARK-1, visit support.insituware.com.
Getting to Know Your Device Status Bar Time Back Wi-Fi Home Battery Life Overview Navigation Bar 14
Basic Gestures Tap to select or open something on your device like a button or an app. Tap and hold to move apps around or occasionally access other options (think of this as “right-clicking”). Swipe to scroll up and down, left and right, or any other direction on the screen. Turn OFF or RESTART the Device To turn OFF or RESTART the Vision MARK-1, press and hold the power button on the side until the options to Power Off and Restart appear on the screen.
Using Apps Finding Apps To search for apps, swipe up on the screen to access All Apps. Use the search bar to type in the name of the app you are looking for, or search through the apps below.
Switch Between Recently Used Apps Tap the Overview button ( ) on the Navigation Bar to show all open apps. Swipe left or right to go to the app you want and tap it. Close Apps Close one app: While viewing open apps, swipe up on the app you want to close.
Close all apps: While viewing open apps, swipe right until you see Clear All. Tap Clear All to close all open apps.
Adding an App to the Home Screen Find the app you want to add to the Home screen. Tap and hold the app (don’t release yet), and start dragging across the screen where you will be taken to a special view of the Home screen. Continue to hold the app while you decide where to put it. Release the app once you’ve chosen a spot, and it will be added to your Home screen.
Move or Remove Home Screen Apps On the Home screen, tap and hold the app you want to move or remove. To move it, drag and drop the icon to a new location. To remove it, drag the icon to the Remove option. To uninstall it from the device, drag the icon to the Uninstall option. Note: This won’t delete the app from your device. It will only remove the shortcut from the Home screen.
Change Your Settings Quick Settings Swipe down on the Status Bar to open the Notification Drawer and access quick settings and notifications. Swipe down again on the Notification Drawer to reveal the expanded view, to show additional details.
Change the Brightness From the Notification Drawer tap and hold the star icon left or right to change the brightness of the screen. Battery Battery Saver: From the Notification Drawer tap the Battery Saver icon, then select Turn On.
Battery Percentage: From the Settings app tap Battery. Toggle Battery Percentage and you will now see the percentage in the Status Bar.
Change the Volume Use the volume buttons on the side of the device to turn the volume up (+) or down (-). Additional Settings Go to the Settings app to view additional settings.
Safety Precautions Note: The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in the manual. WARNING Do not insert liquids or foreign objects. Penetration of liquids or foreign objects could result in fire or electrical shock. If liquids or foreign object should enter the device, immediately turn it off, disconnect the charging cord from the power outlet (if charging) and contact Insituware at support. insituware.com.
shock. If the device is shocked, immediately turn it off, disconnect the charging cord from the power outlet (if charging) and contact Insituware at support.insituware.com. Do not place the device on an unstable surface. If the device should be dropped and/or broken, it could result in an injury, and continued use could result in fire or electrical shock. • Do not place the device on an unstable, slanted, or vibrating surface such as a wobbly or inclined stand.
other accessories near a hot object such as heater, or cold objects such as a refrigerator, etc. Body worn operations. For body worn operations, this Vision MARK1 has been tested and meets the FCC & ISED RF exposure guidelines for use with an accessory that contains no metal and the positions the Vision MARK-1 a minimum of 0 cm from the body. Use of other accessories may not ensure compliance with FCC & ISED RF exposure guidelines.
Regulatory Notices FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Operation of this device in the 5150-5250 MHz band is restricted to indoor use only.
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
Take Control insituware.com Form No.