Quick Start Guide
HDMI (ARC) AUX IN USB OPTICAL
HDMI (ARC) AUX IN USB OPTICAL
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
15
16
CONNECTING YOUR SOUNDBAR
Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, or cable box, to identify your audio OUT jacks.
Choose one connection option below that fits your audio source. You can connect several devices and switch the sound source as required.
Note: Turn o all devices while you are making connections.
HDMI connection (BEST)
1 Connect one end of an HDMI cable (not included) to the HDMI ARC jack on
your soundbar.
2 Connect the other end of the cable into the HDMI ARC jack on your TV.
3 Make sure that your TV’s output settings are correct:
a. Turn on your TV’s CEC and ARC audio control functions (typically found in
system or HDMI settings).
b. Change your TV’s audio output to the PCM format (typically found in audio
settings).
See the documentation that came with your TV or check its service support for
more information.
4 Press the button on your soundbar or the SOURCE button on the remote
control repeatedly until the source indicator turns white.
Note: HDMI ARC and CEC technology let you control your soundbar with your TV remote.
- OR - - OR -
USB connection
1 Plug a USB thumbdrive (with MP3 or WAV files) into the USB port on the back of your soundbar.
2 Plug in your soundbar, then turn it on.
3 Press the button on your soundbar or the SOURCE button on the remote control repeatedly until the source
indicator turns purple.
4 Control USB playback by pressing the (play / pause) PAIR, (previous), and (next) buttons on the remote control.
Note: If playback doesn’t begin immediately, press the (play/pause)/PAIR button on the remote control.
CONNECTING THE AC POWER
IMPORTANT: Plug in the AC power cord only after all other connections
have been made.
CAUTION: Make sure that the electrical outlet matches the input
requirements of 100-240 V, 50/60 Hz before connecting.
• Connect one end of the included, detachable AC power cord into
the DC IN on your soundbar, then plug the AC power cord into a
power outlet or surge protector.
Power outlet
AC power cord
AUDIO QUALITY
BEST
BETTER
GOOD
JACK TYPE (on source device)
HDMI cable (not included)
Digital optical cable (included)
3.5 mm audio cable (included)
CABLE
- PICK ONE -
3.5 mm Aux connection (GOOD)
1 Connect one end of the included 3.5 mm audio cable into the AUX IN jack
on your soundbar, then connect the other end of the AUX cable to the
headphone or AUX Output jack on your audio source device.
2 Press the button on your soundbar or the SOURCE button on the
remote control repeatedly until the source indicator turns orange.
Audio source with
3.5 mm jack
(smartphone, tablet,
TV, or iPad)
3.5 mm audio cable (included)
QUICK SETUP GUIDE
2.0 Soundbar
NS-HTSB22
Flat size (W × H): 40.81 in. × 8.27 in. (1036.57 mm × 210.06 mm)
Final folded size: 5.83 in. × 8.27 in. (148.082 mm × 210.06 mm)
FEATURES
• Versatile options let you connect to a TV (with HDMI) and an additional audio
source (with optical digital audio, 3.5 mm AUX, USB, or Bluetooth)
• HDMI ARC and CEC technology let you control your soundbar with your TV
remote (HDMI cable not included. HDMI PCM Audio Mode only)
• Bluetooth device memory automatically pairs to your last connected device
• 3 sound modes (Standard, Theater, and News) provide an optimal audio
experience
• IR remote learning functionality means your soundbar can “learn” to respond to
another remote control (not all remotes are compatible), such as your TV remote
• Remote control (batteries included) lets you wirelessly control your sound
• 6 ft (1.8 m) optical cable and 6 ft (1.8 m) 3.5 mm audio cable let you connect to a
variety of audio devices
• Wall mountable design (hardware included) helps save space
• USB support for MP3 and WAV playback
Back of your soundbar
Back of your soundbar
Optical connection (BETTER)
1 Remove the caps of the both ends of the optical cable.
2 Connect one end of the included digital optical cable
to the OPTICAL jack on your soundbar.
3 Connect the other end into the Digital Optical Output
jack on your source device.
4 Change the device’s audio output to the PCM format
(typically found in audio settings). See the documentation that came with your
audio source device for more information.
5 Press the button on your soundbar or the SOURCE button on the remote
control repeatedly until the source indicator turns green.
Digital optical cable (included)
Audio source (TV, Blu-ray player,
or cable box)
Back of your soundbar
HDMI (ARC) AUX IN USB OPTICAL
Back of your soundbar
NS-HTSB22
VOL
VOL
PAIR
BASS
SOURCE
STANDARD
THEATER
NEWS
AAA
AAA
Mounting hardware
Soundbar
Mounting template
3.5 mm audio cable
Digital optical cable
AAA batteries (2)
Remote control
AC power cord
Quick Setup Guide
# DESCRIPTION
1 Speaker
2 Status indicators
3 Remote control sensor
4 HDMI (ARC) jack
5 AUX IN jack
6 USB port
7
OPTICAL jack
8
AC power cord
9 (Power) button
10 (sound source
selector)
11 + / - Buttons
12 Power
13 + /- buttons
14 SOURCE
15 (Mute)
16 Bluetooth/USB buttons
17
Bass button
18 Sound mode buttons
FUNCTION
Left and right speakers
Dierent color LEDs indicate:
Red - Standby mode
Blue - Bluetooth mode (blinks while pairing)
Orange - AUX mode
Green - Digital optical mode
Purple - USB mode
White - ARC mode
Turquoise - Bass mode (blinking)
Green/Blue/Red (blinking) - DSP (Digital Signal Processing) mode
Detects signals from the remote control.
Connect an HDMI Cable (not included) to this jack on an ARC-enabled
sound system. Set sound output from source to PCM format.
Connect a 3.5 mm audio cable to this jack.
Connect a USB source device to play WAV files.
Connect a digital optical cable to a TV or audio device to this jack
and the OPTICAL OUT jack on a TV or audio source device. Make
sure that the sound output from the source is set to the PCM
format.
Connect the AC power cord to this jack to power the soundbar.
Press to turn on your soundbar, press again to return to standby
mode.
Press to cycle through the available sound sources.
Press to increase or decrease your soundbar’s volume.
Press to turn on
your
soundbar. Press again to put
your
soundbar into
standby mode.
Press to increase or decrease your soundbar’s volume.
Press repeatedly to cycle through the available sound sources.
Press to mute the sound from
your
soundbar. Press again to restore the
sound.
When a Bluetooth or USB source is selected, press to control playback
with the following buttons:
Previous / Play / Pause / Next
PAIR: press and hold for three seconds to disconnect Bluetooth.
Press to turn on the bass frequency enhancement, then use + and -
buttons to adjust the bass volume level within 10 seconds. The status
indicator on your soundbar blinks turquoise when activated.
Press to select the sound mode. The status indicator on your soundbar
blinks three times in sequence green > blue > red.
STANDARD - general music or TV shows listening.
THEATER - optimize movie sound for a theater setting.
NEWS - optimize spoken voice or dialog for TV news and more.
SOUNDBAR
REMOTE CONTROL
HDMI (ARC) AUX IN USB OPTICAL
HDMI cable (not included)
Audio source
(TV)
Back of your soundbar
INPUT
HDMI(ARC)
Remove the cap before use
NS-HTSB22_20-0767_QSG_V2_EN_Final.ai 1 2/12/2021 2:24:27 PMNS-HTSB22_20-0767_QSG_V2_EN_Final.ai 1 2/12/2021 2:24:27 PM