Quick Start Guide

QUICK SETUP GUIDE
2.0-Channel
Mini Soundbar
NS-HMSB20
Back of your soundbar
PACKAGE CONTENTS
Before using your new product, please read these instructions to prevent any damage.
FEATURES
• Versatile connection options
• Let you connect to a TV and an additional audio device
• Three dierent sound modes
• One cable connection easily connects to your TV
• Bluetooth wirelessly streams audio from your Bluetooth-enabled device
• Mounting holes give you the option to hang your soundbar on the wall
Remote control
Soundbar
3.5 mm to
RCA cable adapter
RCA audio cable
AAA batteries (2)
Mounting template
AAA
AAA
# DESCRIPTION
1
Speaker
2 Status indicator
3 Remote control sensor
4 (Power) button
5 + / - Buttons
6 (sound source selector)
7 AUX IN jacks
8 USB port
9 OPTICAL jack
10 DC IN jack
11 Power
12 Volume +/-
13 (sound source selector)
14 Sound Mode buttons
15 (Mute)
16 Bluetooth/USB buttons
17 (Bluetooth)
FUNCTION
Left and right speakers
Dierent color LEDs indicate:
• Red - Standby mode
• Green - Digital optical • Blue - Bluetooth
• Yellow - AUX IN • Purple - USB
Detects signals from the remote control.
Press to turn on the soundbar, press again to return to standby mode.
Press to increase or decrease the volume of your soundbar.
Press to cycle through the available sound sources.
Connect an RCA audio cable (included) to these jacks, red to red and white to white.
You can play WAV les from a USB source.
If your TV (or other audio source device) has an Optical OUT jack, connect a digital
optical cable (not included) to your source device and to this jack. Make sure that the
sound output from the source is set to PCM format.
Connect the AC power adapter to this jack to power the soundbar.
Press to turn on your soundbar. Press again to put your soundbar into standby mode.
Press to increase or decrease the volume of your soundbar.
Press repeatedly to cycle through the available sound sources.
Press to select the sound mode, the status indicator on your soundbar blinks white three
times when activated.
STANDARD: General music or TV shows listening.
THEATER: Optimize movie sound for a theater setting.
NEWS: Optimize spoken voice or dialog for TV news and more.
Press to mute the sound from
your soundbar. Press again to restore the sound.
When a Bluetooth or USB source is selected, you can control playback with the following
buttons: Previous / Play pause / Next
PAIR: Press and hold for three seconds to disconnect Bluetooth.
Press to enter Bluetooth mode
SOUNDBAR
REMOTE CONTROL
Back of your soundbar
Side view
4
5
6
Back view
Remote control
CONNECTING THE SOUNDBAR
Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, or cable box, to identify your audio OUT ports.
Choose one connection option below that ts your audio source. You can connect several devices and switch the sound source as required.
Note: Turn o all devices while you are making connections.
RCA connection (GOOD)
1 Connect the red and white RCA connectors on the RCA audio cable to the
AUX IN ports on your soundbar.
2 Connect the other end into the RCA audio OUTPUT ports on your audio
source device.
Note: Make sure that the cable ends match the color of the ports.
3 Press the button repeatedly on your soundbar or remote control until the source
indicator turns yellow.
Digital connection (BEST)
1 Connect one end of the digital optical cable (not included) to the OPTICAL jack
on your soundbar.
2 Connect the other end into the Digital Optical Output port on your audio
source device.
3 Change the device’s audio output to PCM format (typically found in audio
settings). Refer to the documentation that came with your audio source device
for more information.
4 Press the button repeatedly on your soundbar or remote control until the
source indicator turns green.
- OR -
Digital optical cable
(not included)
Audio source (TV, Blu-ray player,
or cable box)
Back of your soundbar
RCA audio cable (included)
Audio source
(TV, Blu-ray player, or cable box)
USB connection
Note: If you mount your soundbar on a wall, you cannot connect a USB thumbdrive as a sound source.
1 Plug a USB thumbdrive (with WAV les) into the USB port on the back of your soundbar.
2 Plug in your soundbar, then turn it on.
3 Press the button repeatedly on your soundbar or remote control until the source indicator turns
purple.
4 Control USB playback by pressing the ( play/pause) PAIR,
( previous), and ( next) buttons on the remote control.
Note: If playback does not begin immediately, press the ( play/pause)/PAIR button on the remote control.
Back of your soundbar
CONNECTING THE AC ADAPTER
Cautions:
• Make sure that the electrical outlet matches the AC adapter’s input
requirements of 100-240 V, 50/60 Hz before connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other connections have
been made.
1 Connect the AC adapter to the DC IN jack on the back of
the soundbar.
2 Plug the other end of the AC adapter into a power outlet or
surge protector.
AC wall plug
AC adapter
Front view
AUDIO QUALITY
BEST
GOOD
GOOD
JACK TYPE (on source device)
Digital optical cable (not included)
RCA audio cable (included)
3.5 mm audio cable (adapter included)
CABLE
Flat size: (W × H) 34.98 in. x 8.27 in. (888.49 mm x 210.06 mm)
Final folded size: 5.83 in. x 8.27 in. (148.082 mm x 210.06 mm)
- OR -
- PICK ONE -
3.5 mm connection (GOOD)
1 Connect the red and white RCA connectors on the RCA audio cable to the
AUX IN port on your soundbar, then connect the other end jacks on the
3.5 mm to RCA cable adapter (included).
2 Connect the other end of the adapter to the headphone or AUX Output on
your audio source device.
3 Press the button repeatedly on your soundbar or remote control until the
source indicator turns yellow.
Back of your soundbar
Audio source with 3.5 mm jack
(smartphone, tablet, TV, or iPad)
3.5 mm to RCA
cable adapter
(included)
RCA audio cable (included)
Quick Setup
Guide
AC power adapter
Mounting screws and
wall anchors
NS-HMSB20_20-0921_QSG_V2_EN_Final.ai 1 2/9/2021 12:53:51 PMNS-HMSB20_20-0921_QSG_V2_EN_Final.ai 1 2/9/2021 12:53:51 PM