USER GUIDE Digital Wireless Headphones NS-HAWHP2 Before using your new product, please read these instructions to prevent any damage.
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Using your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital Wireless Headphones Safety information WARNING: To reduce the risk of fire or electric shock, do not expose this system to rain or moisture. • • • • • • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this system near water. Clean only with a dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Features • • • • • • • Strong 2.
Digital Wireless Headphones Headphones Item Description 1 Power/Pairing indicator (red/blue): • Blue - stays on if the headphone and docking station are paired. Blinks if the headphone and docking station are pairing. • Red - blinks three times a minute if the headphone batteries are low. Lights when the batteries are charging. 2 Headphone (power) button (on right earpiece). Press and release to turn the headphones on. Press and hold (for more than two seconds) to turn the headphones off.
Docking station Item Description 1 Charging indicator: • Turns red when the headphones are charging. • Turns green when the headphones are charged. Pairing indicator (blue): • Stays on if the headphones and docking station are paired. • Blinks if the headphones and docking station are pairing. 2 Input source button. Press to switch between audio input sources. 3 RCA source indicator. Lights when the RCA input source is selected. 4 Headphones. 5 OPTICAL source indicator.
Digital Wireless Headphones Docking station back AUDIO IN AUDIO OUT DIGITAL OPTICAL IN Item Description 1 AUDIO IN jacks (L and R). Connect a TV or other sound source to these jacks. 2 AUDIO OUT jacks (L and R). Optional. Connect to a stereo system or other audio device. 3 DIGITAL OPTICAL IN. Connect a digital optical cable to this jack. 4 DC 5V jack. Connect the AC adapter to this jack. www.insigniaproducts.
Setting up your system Step 1- Powering the docking station CAUTION: • To avoid risk of fire and to prevent damage, only use the AC adapter supplied with your wireless headphones. Make sure that the AC power outlet matches the AC adapter’s 100-240V before making the connection. • Connect one end of the AC adapter to the docking station’s DC IN jack and the other end to a power outlet. The PAIRING indicator blinks blue while it searches for a connection.
Digital Wireless Headphones 2 Place the headphones onto the docking station. Make sure that the headphone charging contacts and the docking station charging pins make contact by aligning the arrows (as shown below) when you put the headphones in the charging station. Charging indicator Charging pins Power/Pairing indicator • • • The docking station’s Charging indicator turns solid red to indicate the headphones are charging. The headphones’ power/pairing indicator also turns red.
Step 3 - Connecting the headphone docking station Note: Do not connect the RCA cables to the AV jacks on the back of your TV. AV jacks are for video and audio INPUT, not audio OUTPUT. Look at the ports on your audio source device, such as a TV, stereo system, home theater, smartphone, computer, or tablet to identify your audio OUT ports. Choose the connection option below that fits your audio source device.
Digital Wireless Headphones Option A - Digital OPTICAL connection 1 Connect one end of a digital optical cable into the DIGITAL OPTICAL IN port on the docking station. 2 Plug the other end of the digital optical cable into the digital optical output port on a TV, stereo system, home theater, or other audio source. 3 Press (input source) on the headphones or dock to change the input to OPTICAL. The OPTICAL source indicator on the base lights white.
Option B - RCA connection 1 Connect one end of the RCA cable to the red and white AUDIO IN ports on the docking station. 2 Connect the other end into the red and white AUDIO OUT ports on your audio source device. 3 Press (input source) on the headphones or dock to change the input to RCA. The RCA source indicator on the base lights white. Note: You cannot change the input source while the headphones are on the dock.
Digital Wireless Headphones Option C - 3.5 mm connection 1 Plug one end of the RCA cable (included) into the AUDIO IN ports on the docking station, red to red and white to white. 2 Connect the other end of the RCA cable into the red and white connectors on the 3.5 mm-to-RCA adapter cable (included). 3 Connect the 3.5 mm end of the 3.5 mm-to-RCA adapter cable into the 3.5 mm headphone jack on your audio source. 4 Press (input source) on the headphones or dock to change the input to RCA.
Option D - Multiple Connections (Optional) If your audio source device (a TV in the example shown) only has one audio output, but you want to connect it to both the docking station and a stereo system or home theater, do this. 1 Connect one end of the RCA cable (included) to the red and white AUDIO IN ports on the docking station. 2 Connect the other end into the red and white audio out ports on your audio source device. Note: Use the 3.5mm-to-RCA cable adapter to connect to a headphone jack, if necessary.
Digital Wireless Headphones Using your system Turning on and pairing the system 1 The docking station is turned on by plugging in the AC adapter. The Power/Pairing indicator on the docking station blinks (blue). 2 To turn on your headphones: • Press and hold (power) on the right earpiece for two seconds. OR • If the headphones are on the base, lift them off. The Power/Pairing indicator on headphone lights solid blue.
Note: If the charge on the headphone batteries is low, the Power/Pairing indicator on the headphones blinks red (three times a minute) and beeps (twice a minute). When this happens, you should charge the headphones. For instructions, see “Using your system“ on page 15. If the power indicators on the headphones and docking station continue to blink once a second, they are no longer paired to each other.
Digital Wireless Headphones Turning off the system Note: It’s important to turn the headphones off when not in use to conserve the battery. OR, if you prefer, you can leave them on as long as they are placed in the docking station. 1 Press and hold (more than two seconds) the headphones. (power) button on the 2 Disconnect the AC power adapter to turn off the docking station. Understanding indicator lights LED Behavior Description Solid blue The headphones are paired to the dock.
Troubleshooting Check this list for a possible solution before calling for service. Problem Solution No power • Make sure that the batteries have been charged. • Try power cycling the docking station by unplugging it and plugging it back in. • Try another power outlet. My headphones are not charging • Make sure that the headphone’s charging contacts and the docking station’s charging pins make contact. You might have to rock them back and forth to make a good connection.
Digital Wireless Headphones Problem Solution There is sound interference • Move the docking station slowly to find the best reception position for your headphones. • Shorten the distance between your headphones and the docking station. The maximum distance is 33 feet (10 m), but walls and other obstructions will limit this distance. • Make sure that all of the cables are connected correctly.
Problem Solution Cannot pair the headphones • Shorten the distance between the docking station and your headphones. • Make sure that the docking station is in pairing mode. • Turn on the docking station, then place the headphones onto the station. They will enter autopairing mode (this may take 2-20 seconds). Tip: If the power indicators on the headphones and docking station continue to blink after 20 seconds, they are no longer paired to each other.
Digital Wireless Headphones This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ONE-YEAR LIMITED WARRANTY Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
Digital Wireless Headphones • • • • • • • Connection to an incorrect voltage or power supply Attempted repair by any person not authorized by Insignia to service the Product Products sold “as is” or “with all faults” Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights reserved.
