Quick Start Guide

RCA
OPTICAL
QUICK SETUP GUIDE
Digital Wireless
Headphones
NSHAWHP2
PACKAGE CONTENTS
• Headphones and docking station
• AC power adapter
• Optical cable
• RCA audio cable
• 3.5 mm-to-RCA adapter cable
Note: The RCA audio cable and 3.5 mm-to-RCA adapter cable are connected together in the box.
• Quick Setup Guide
FEATURES
• Strong 2.40 Ghz digital wireless signal reaches up to 33 ft (10 m)
• Built-in lithium-ion battery recharges on a convenient docking station
• Over-the-ear design with adjustable headband provides a secure t
• Analog and digital audio inputs provide multiple connection options
• Digital optional input gives you the best sound quality
• Lightweight construction for comfortable wea
• Works with all your audio components (TV, CD/DVD player, A/V receiver)
Before using your new product, please read these instructions to prevent any damage.
Power/Pairing indicator
Power button
Volume Up (+) button
Volume Down (–) button
Input Source button
Power/Pairing indicator
Input Source button
RCA source indicator
Docking station
Headphones
OPTICAL source indicator
AUDIO IN jacks
AUDIO OUT jacks
DIGITAL OPTICAL
IN jack
5V/500mA
(DC in) jack
DIGITAL
OPTICAL
IN
AUDIO
IN
AUDIO
OUT
DIGITAL
OPTICAL
IN
AUDIO
IN
AUDIO
OUT
Docking station (back view)
Docking station (front view)
Right earpiece
FIND YOUR USER GUIDE ONLINE!
1 Go to www.insigniaproducts.com.
2 Use the search bar to nd NS-HAWHP2.
3 Select Support & Downloads.
4 Next to User Guide, select the language you want.
SETTING UP YOUR HEADPHONES
Powering the docking station
1 Connect one end of the AC power adapter to the docking station’s 5V/500mA (DC in) jack and the
other end to a power outlet.
2 The Power/Pairing indicator on the docking station begins to blink (blue).
Notes:
• To enter standby mode: Press and hold the Input Source button for more than 10 seconds to put the
docking station in standby mode.
• To enter normal mode: Press the Input Source button. The docking station’s LEDs turn on.
-OR-
Place the headphones onto the docking station’s charging contacts. The Power/Pairing indicators turn solid red
while the headphones are charging.
Charging pins
DIGITAL
OPTICAL
IN
AUDIO
IN
AUDIO
OUT
DIGITAL
OPTICAL
IN
AUDIO
IN
AUDIO
OUT
5V/500mA (DC in) jack
Docking station (back)
Charging the headphones
Important: Before using the wireless headphones for the rst time, make sure that the batteries are
charged for at least four hours. The docking station Power/Pairing indicator turns solid green when the
batteries are fully charged.
1 Connect one end of the AC power adapter to the docking station’s 5V/500mA (DC in) jack and the
other end to a power outlet. The Power/Pairing indicator on the docking station blinks (blue).
2 Place the headphones onto the docking station. Make sure that the headphone charging contacts
and the docking station charging pins make contact when you put the headphones in the charging
station.
3 The indicators on the docking station and the headphones turn solid red to indicate the
headphones are charging.
4 When the headphones are fully charged, the docking station Power/Pairing indicator turns solid
green and the Power/Pairing indicator on the headphones turns o.
5 When the headphone battery charge is low, the Power/Pairing indicator on the docking station
blinks red three times every minute.
Notes:
• It can take up to two hours to charge the batteries. The batteries can last up to ten hours with continuous use
(depending on the headphone volume level and distance from the docking station).
• The headphones cannot be charged when the docking station is unplugged.
• If the charge on the headphone batteries is low, the Power/Pairing indicator on the headphones blinks red. You
should charge the headphones.
• The headphones will automatically power o if the battery is not charged after emitting a low-battery warning.
OPTICAL
RCA
DIGITAL
OPTICAL
IN
AUDIO
IN
AUDIO
OUT
DIGITAL
OPTICAL
IN
AUDIO
IN
AUDIO
OUT
Docking station (back)
Docking station (front)
5V/500mA (DC in) jack
Power/Pairing indicator
Input Source button