User Guide Digital Clock Radio with FM NS-CLOPP1 Before using your new product, please read these instructions to prevent any damage.
Insignia NS-CLOPP1 Digital Clock Radio with FM Insignia NS-CLOPP1 Digital Clock Radio with FM Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Top buttons . . . . . . . . . . . . . . . . . . . . . .
Insignia NS-CLOPP1 Digital Clock Radio with FM Important safety instructions 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Insignia NS-CLOPP1 Digital Clock Radio with FM Features Top buttons 3 1 2 5 4 6 1 2 7 Preset Sleep SNOOZE / DIMMER Source 8 9 10 # Item 1 Preset button Press to program a radio station preset or to tune to a preset radio station. See “Programming a radio station preset” on page 12 or “Tuning to a preset radio station” on page 12. 2 Sleep button Press to set the time or the sleep timer. For more information, see “Setting the time” on page 8 or “Setting the sleep timer” on page 10.
Insignia NS-CLOPP1 Digital Clock Radio with FM # Item Description 9 (volume down) button Press to decrease the volume. 10 (volume up) button Press to increase the volume. Back 5V 0.7A 1 AUX 2 # Item Description 1 DC IN jack Connect the AC/DC power adapter to this the jack. See “Connecting the AC/DC power adapter” on page 8. 2 AUX jack Connect an audio device to this jack to play the audio from the device through the radio speakers. See “Connecting an audio device” on page 12. www.
Insignia NS-CLOPP1 Digital Clock Radio with FM LCD 1 2 3 4 5 12:08 Volume SLEEP Preset Buzzer 1 Radio 6 AUX FM Buzzer 2 Radio SNOOZE AM PM MHz 7 8 9 10 11 # Icon Description 1 Preset When you are programming a radio station preset, “Preset” and the preset number (P-01 through P-10) appear in the center of the LCD. See “Programming a radio station preset” on page 12.
Insignia NS-CLOPP1 Digital Clock Radio with FM Package contents • • • • Digital clock radio with FM AC/DC power adapter Quick Setup Guide User Guide Setting up your radio Installing backup batteries The backup batteries provide power to backup the time setting when you unplug the AC/DC power adapter. Cautions • Use only the size and type of batteries specified. • Do not mix old and new batteries. • Make sure that you follow the correct polarity as indicated in the battery compartment.
Insignia NS-CLOPP1 Digital Clock Radio with FM 3 Insert the tab on the battery compartment cover into the slot on the battery compartment, then press the cover down until it clicks into place. Connecting the AC/DC power adapter Note If you unplug the AC/DC power adapter and the backup batteries are dead or not installed, the time setting is lost. To connect the AC/DC power adapter: 1 Plug the small connector on the power adapter into the DC IN jack on the back of your radio.
Insignia NS-CLOPP1 Digital Clock Radio with FM Setting the alarm sound Your radio has two alarms and can play the buzzer or the radio for the alarm sound. You can use the same alarm sound for both alarms or set one alarm to use the buzzer and the other alarm to use the radio. Note Button presses must be within three seconds of each other. If you do not press a button within three seconds, your radio exits alarm setting mode. To set the alarm sound: 1 Press 1 (Alarm 1) or the LCD. 2 (Alarm 2).
Insignia NS-CLOPP1 Digital Clock Radio with FM 4 Press or the minutes. to increase the minutes or press or to decrease 5 Press 1 (Alarm 1) or 2 (Alarm 2) again. The Volume icon appears on the LCD and the volume digits blink. 6 Press or to increase the alarm volume or press or to decrease the alarm volume. The alarm volume range is from 1 to 15 with 15 being the loudest setting. The default setting is 10. 7 Press 1 (Alarm 1) or 2 (Alarm 2) again to save the time setting and exit alarm setting mode.
Insignia NS-CLOPP1 Digital Clock Radio with FM Adjusting the LCD brightness When you adjust the LCD brightness, your radio retains the setting and uses this setting the next time you turn on your radio. To adjust the LCD brightness: 1 Quickly press repeatedly to select a brightness level. You can select High, Middle, or Low. SNOOZE / DIMMER 2 Wait a few seconds to save your setting and exit brightness mode. Playing your radio Notes When you turn off your radio, it goes into standby mode.
Insignia NS-CLOPP1 Digital Clock Radio with FM Programming a radio station preset A radio station preset lets you assign a preset number to a radio station to make it easier to tune to a station. You can program 10 presets. To program a radio station preset: 1 Tune to the radio station you want to program, then press and hold Preset for two seconds. The “Preset” icon lights and the next available preset number (P-01 through P-10) appears in the center of the LCD.
Insignia NS-CLOPP1 Digital Clock Radio with FM Specifications Total RMS power Total peak power Signal-to-noise ratio Frequency response Speakers Batteries Dimensions (W × D × H) Weight 2 W @1kHz, @ 10% THD 4W ≥ 65dB 300Hz - 20kHz 2 × 40 mm 2 AAA 9.8 × 2.1 × 2.1 in. (250 × 54 × 54 mm) 1.1 lbs. (0.5 kg) Legal notices FCC Statement This device complies with Part 15 of the FCC Rules.
Insignia NS-CLOPP1 Digital Clock Radio with FM 90-day limited warranty - Insignia Definitions: Insignia Products (“Insignia”) warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of ninety (90) days from the date of your purchase of the Product (“Warranty Period”).
Insignia NS-CLOPP1 Digital Clock Radio with FM • • • Abuse Negligence Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home. • Modification of any part of the Product, including the antenna • Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2013 BBY Solutions, Inc. All Rights Reserved 1-877-467-4289 www.insigniaproducts.