InsideTNC GeForce2 Series U SE R ’ S G U I D E
Copyright© Copyright© 2000 Inside Telnetcom Co., Ltd This installation guide is copyrighted. All rights reserved. This document may not, in whole or part, be copied, reproduced, reduced or translated by any means, either mechanical or electronic, without prior consent in writing from Inside Telnetcom Co., Ltd. The information in this manual has been carefully checked and is believed to be accurate. However, Inside Telnetcom Co.
- CONTENTS 1. Features of InsideTNC’ InsideTNC ’ s DREAM.GeForce2 Series ……………………………………………… - The Features of GeForce2 Series - System Requirements - Driver and Software Support 2. Installation (Hardware) ……………………………………………………………… 3. Installation ((Software) Software) ………………………………………………………………… 4. Troubleshooting ……………………………………………………………………… APPENDIX * Table A.
1. The Features of InsideTNC’ InsideTNC’ s DREAM. GeForce2 Series Inside Telnetcom’ s GeForce2 MX supports the advanced features, TwinView, an innovative dual display architecture, which doubles your desktop workspace using two space saving display and DVC(Digital Vibrance Control) which provides crisp, bright visuals. DREAM.
device to support two digital flat panel displays through dual integrated TMDS transmitters. (www.nvidia.com) DVC(Digital Vibrance Control) : It's rare to find ideal lighting conditions for crisp, bright, clean onscreen visuals at home or in the office. Digital Vibrance Control is a patent pending innovation that allows the user to digitally control the intensity of all images through a simple control panel. The result is richer color, and brighter, cleaner, more ergonomically pleasing images. (www.nvidia.
2. Installation (Hardw are) 1. With the power off, remove your computer cover and locate on AGP slot. 2. Insert your card firmly into the slot. Card should be taken to press it evenly and snugly into its slot. Do not force! NOTICE. AGP slot is designed as a double structure in a different way of PCI slot. When DREAM.GRAPHICS is not inserted into its AGP slot snugly, your computer system cannot work at all; therefore, you must set your board firmly into the slot.
3. Once you are certain that the card is installed properly in its slot, secure it to the PC frame with the screw you removed in step. Make sure that the card does not lift out of the slot while tightening the bracket screw. Connect your monitor cable to the 15 pin-connectors on your computer. 4. Secure the cover and reboot your computer. Continue with the software installation for operating system in the following section.
3. Installation (Softw are) This section describes the software installation process for supported Windows. To install theGeForce2 Series driver 1. Start up Windows and log onto and account with administrator privileges. 2. Place the GeForce2 Series CDROM disk into your CD-ROM drive. When the installation window opens, choose the installation. 3. Follow the instructions that appear on your screen. 4. Restart your system at the prompt.
2. From Standard PCI Graphics Adapter [VGA] Properties > Driver, click Update Driver… 1. Select Specify the location of the driver [Advanced] and click Next.
2. From the select Search for a better driver than the one that you are using now. [Recommended] and then check the Specify a location E:\\VGA\DRIVER\GeForce2 Series\Win9X. and then click Next. In this case, E: \ means CD-Rom drive. 5. When Windows driver file search for the device: InsideTNC GeForce2 Series appears, click Next.
6. Copying files to Windows system folder should been completed. It may take a few seconds. 7. Click Finish to complete setup. 8. . Click Yes to restart your computer.
4. Troubleshooting In this section, you can get the information to solve the problems that may be caused when you use your new card Question 1 : ‘Version Crash’ message appeared and Windows asked me “Do you save ex-file?” during installing driver. How can I answer to solve it? Answer 1 : When we change the graphic board, the same file name exists in the System folder in Windows. . In this case, selecting No is recommended. Question 2: Even driver installation was completed, 16 color was selected only.
APPENDIX *Table A.