2. After Selecting Search for the best driver for your device(Recommended) from the following dialogue box, insert the Support CD into your CD-ROM drive. From the Specify the Location:, select E:\VGA\DRIVER\GeForce2 MX/GTS\Win9X , click Next. In this case, E:\ means CD-ROM drive.
3.Select The updated software [Recommended] InsideTNC GeForce2 MX/GTS and click Next. 4. When Windows driver file search for the device: InsdieTNC GeForce2 MX/GTS appears, click Next.
5. Copying files to Windows system folder should been completed. It may take a few seconds. 6. Click Finish to complete setup. 7. Click Yes to restart your computer.
Method II. Do It Yourself 1. In order to install the driver of Inside’s GeForce2 MX/GTS by yourself, Select Start > Setting > Control Panel > System Properties > Device manager > Display adapters > Standard PCI Graphics Adapters and click Properties in Windows95/98/ME.
2. From Standard PCI Graphics Adapter [VGA] Properties > Driver, click Update Driver… 3. Select Specify the location of the driver [Advanced] and click Next.
4. From the select Search for a better driver than the one your device is using now. [Recommended] and then check the Specify a location E:\\VGA\DRIVER\GeForce2 MX/GTS\Win9X. and then click Next. In this case, E: \ means CD-Rom drive. 5. When Windows driver file search for the device: InsdieTNC GeForce2 MX/GTS appears, click Next.
6. Copying files to Windows system folder should been completed. It may take a few seconds. 7. Click Finish to complete setup. 8. . Click Yes to restart your computer.
4. Troubleshooting The graphic board users queried as follow: Question 1 : ‘Version Crash’ message appeared and Windows asked me “Do you save ex-file?” during installing driver. How can I answer to solve it? Answer 1 : When we change the graphic board, the same file name exists in the System folder in Windows. . In this case, selecting No is recommended. Question 2 : Even driver installation was completed, 16 color was selected only.
APPENDIX *Table 1-1.
