User's Guide
Table Of Contents
- INSEEGO COPYRIGHT STATEMENT
- INSEEGO TRADEMARKS AND SERVICE MARKS
- Contents
- Overview
- Description
- Indicator LEDs
- Installation Overview
- System Requirements
- Installing a SIM Card
- Installing the Battery
- Connecting Antennas
- Mounting Precautions and Guidelines
- Mounting the Device
- Powering the Device
- Connecting your Device
- Connecting to the Web UI
- Resetting your Router
- Getting Support
- Logging In
- Home Page
- Managing Bluetooth Sensors
- Managing Connected Devices
- Configuring GPS
- Managing Settings
- Accessing Messages
- Viewing Info About the Router
- Getting Help
- Overview
- Firewall
- MAC Filter
- LAN
- Port Filtering
- Port Forwarding
- IPPT
- Remote Management
- VPN
- Included Accessories
- Optional Accessories
- Power Cable
- USB Cable and Adapter
- Product Specifications
- Regulatory Information
- Wireless Communications
- Limited Warranty and Liability
- Safety Hazards
- Safety Hazards
- Installation and Operating Instructions
SKYUS100BSERIESUSERGUIDE
73
LAN
This tab provides settings and information about the Skyus 100B Series router's local area network
(LAN). For this device, the LAN consists of this device and all Wi-Fi and Ethernet connected devices.
IPv4
IP Address: The IP address for this device, as seen from the local network. Normally, you can use the
default value.
SubnetMask:ThesubnetmasknetworksettingfortheSkyus100BSeriesrouter.Thedefaultvalue
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address, make sure to
use the correct Subnet Mask for the IP address range of the LAN IP address.
MAC Address: (read-only) The Media Access Controller (MAC) Address for the Wi-Fi interface on this
device. The MAC address is a unique network identifier assigned when a network device is
manufactured.
DHCP server: This checkbox turns the DHCP Server feature on or off. This should be left checked. The
DHCP server allocates an IP address to each connected device. NOTE: If the DHCP Server is turned off,
each connected device must be assigned a fixed IP address.
DHCPLeaseTime:ThenumberofminutesinwhichconnecteddevicesmustrenewtheIPaddress
assignedtothembytheDHCPserver.Normally,thiscanbeleftatthedefaultvalue,butifyouhave
special requirements, you can change this value.