User's Guide
Table Of Contents
- INSEEGO COPYRIGHT STATEMENT
- INSEEGO TRADEMARKS AND SERVICE MARKS
- Contents
- Overview
- Description
- Indicator LEDs
- Installation Overview
- System Requirements
- Installing a SIM Card
- Installing the Battery
- Connecting Antennas
- Mounting Precautions and Guidelines
- Mounting the Device
- Powering the Device
- Connecting your Device
- Connecting to the Web UI
- Resetting your Router
- Getting Support
- Logging In
- Home Page
- Managing Bluetooth Sensors
- Managing Connected Devices
- Configuring GPS
- Managing Settings
- Accessing Messages
- Viewing Info About the Router
- Getting Help
- Overview
- Firewall
- MAC Filter
- LAN
- Port Filtering
- Port Forwarding
- IPPT
- Remote Management
- VPN
- Included Accessories
- Optional Accessories
- Power Cable
- USB Cable and Adapter
- Product Specifications
- Regulatory Information
- Wireless Communications
- Limited Warranty and Liability
- Safety Hazards
- Safety Hazards
- Installation and Operating Instructions
SKYUS100BSERIESUSERGUIDE
18
Powering theDevice
Youcanpoweryourdeviceusinganexternalpowersource.Whenapowersourceisconnected,the
Skyus100BSeriespowersupautomatically.WhenloadedwithanactiveSIM,it maytake uptotwo
minutes for the device to power up and register on the cellular network.
To power on the device using an external power source:
Connect the device to a powersource. This can be a 4 pin connector, USB, or Ethernet, see Connecting
your Device.
The LEDs will all blink white, signaling the device is starting up. When LEDs stabilize with
green/yellow/blue/red colors, the device is ready for use. The power button should be green showing
the device has sufficient external power.
Using the Backup Battery
TheSkyus100BSeriesfeaturesarechargeable3.8V4400mAh16.7WhLi-ionbackupbatterythat
providesupto12hoursofcriticalpowerforalertingduringpowerlossinstationaryenvironmentsand
usageinvehicleenvironmentswhenthevehicleisoff.Thebatterywillchargewhenconnectedtoany
external powersource.
NOTE: The backup battery is not designed for primary use.
WARNING! The backup battery will charge when external device temperatures are within
-20 – 50° C. Outside of this range, the battery charging circuit will be disabled. Li-ion batteries are not
safetouseinenvironmentsoutsideof-20
–
60C.Ifitispossiblethatthedevicewillseetemperatures
outside of this range, please remove the battery from the device and discontinue use with the battery.
Failuretocomplywiththeseoperatingrangesmayresultinextensivedamagetothedeviceand/or
thedevice’ssurroundingarea.Ifthebatteryisnotneededinyourusecaseoryouwishtooperatethe
deviceoutsideofthisrange,pleaseproperlystoreordisposeofthebatteryaccordingtoyourlocal
waste managementauthority.
To power on the device using the backup battery:
1.
Press and hold the power button on the front of the device until the LEDs start blinking.
2.
The LEDs will all blink white, signaling the device is starting up. When LEDs stabilize with
green/yellow/blue/red colors, the device is ready for use. The power button should show
blue/yellow/red to indicate battery level status.