User's Guide
Table Of Contents
- INSEEGO COPYRIGHT STATEMENT
- INSEEGO TRADEMARKS AND SERVICE MARKS
- Contents
- Overview
- Description
- Indicator LEDs
- Installation Overview
- System Requirements
- Installing a SIM Card
- Installing the Battery
- Connecting Antennas
- Mounting Precautions and Guidelines
- Mounting the Device
- Powering the Device
- Connecting your Device
- Connecting to the Web UI
- Resetting your Router
- Getting Support
- Logging In
- Home Page
- Managing Bluetooth Sensors
- Managing Connected Devices
- Configuring GPS
- Managing Settings
- Accessing Messages
- Viewing Info About the Router
- Getting Help
- Overview
- Firewall
- MAC Filter
- LAN
- Port Filtering
- Port Forwarding
- IPPT
- Remote Management
- VPN
- Included Accessories
- Optional Accessories
- Power Cable
- USB Cable and Adapter
- Product Specifications
- Regulatory Information
- Wireless Communications
- Limited Warranty and Liability
- Safety Hazards
- Safety Hazards
- Installation and Operating Instructions
SKYUS100BSERIESUSERGUIDE
16
In line-of-sight to wireless devices
Near the computers or other devices that communicate with the router
On an upper floor (if applicable)
NOTE: When using multiple points of access, use different radio frequency channels for adjacent
accesspoints.Werecommendleaving5spacesbetweenchannels(e.g.1and6,or 3and8).
Mounting theDevice
You can mount your Skyus 100B Series device using the following methods:
Mounting withScrews
Mounting with Double-Sided Tape
WARNING!Whilemountingyourdevice,donotapplyexcessiveforcetothemountingbracketsasthis
maycause the tabs to fail. Installationis recommendedto be completedby a professional.
MountingwithScrews
CAUTION! If usingrigidmountinghardware,applypressureonly to theendsof the device.Limitthe
mounting pressure only to the amount needed to secure the device.
To mount your device using screws, follow the directions below, using two #4 or #6 screws.
1.
Identify the optimal installation location. Make sure you consider the physical space
requirements of the device, any needed connectors, cables, and antennas. In addition, make
sure you consider mounting location to optimize cellular coverage.
2.
Identify the optimal mounting equipment. Depending on installation location, you may want
toselect woodscrews, metalself-tapping screws,drywall anchors, concrete anchors, orothers.
3.
Locate and install a screw for Hole 1. Make sure the screw head remains 1/8” (3mm) away from
the wall.