MD2000 MD2000 User’s manual / Integration Guide Version:1.
Legal Disclaimer This document and the information contained in this document (the “Information”) is provided to you by Inseego Corp. for informational purposes only. Copyright Notice: Restricted Proprietary Information © Copyright Inseego Corp. 2020 The information contained in this document is the exclusive property of Inseego Corp. All rights reserved. Unauthorized reproduction of this manual in any form without the expressed written approval of Inseego Corp. is strictly prohibited.
Regulatory Compliance Regulatory Compliance This section summarizes the responsibilities and actions required of manufacturers and integrators who incorporate OEM versions of the Inseego Corp. MD2000 module device into their products. In certain situations and applications, these products will require additional FCC or other regulatory approvals prior to sale or operation. Appropriate instructions, documentation and labels are required for all products.
Important Information for Integrators This section provides guidance for using the MD2000 in host devices through the FCC Permissive Change process. When utilizing the permissive change process, Inseego Corp., the grantee, is responsible for all integrations and must be consulted on all regulatory matters involving the MD2000.
The system user manuals and other documentation must clearly indicate operating conditions that must be observed to ensure compliance with FCC RF exposure guidelines and also include appropriate caution and warning statements and information. The host device containing the MD2000 module device may also require compliance to FCC Part 15 Subpart B – Unintentional Radiators. FCC NOTICE TO USERS Inseego Corp. has not approved any changes or modifications to this device by the user.
If the FCC ID of the module is not visible when installed in the host platform, then a permanently attached or marked label must be displayed on the host unit referring to the module. The label should contain wording such as: Contains FCC ID: XXXXXXXXX This device complies with Part 15 of the FCC Rules.
Important Safety Information The following information applies to the devices described in this manual. Always observe all standard and accepted safety precautions and guidelines when handling any electrical device. Save this manual: it contains important safety information and operating instructions. Do not expose the MD2000 product to open flames. Ensure that liquids do not spill onto the devices. Do not attempt to disassemble the product: Doing so will void the warranty.
persons who are experienced in the fields of radio frequency technologies. Inseego Corp. acknowledges that the installation, setup and transmission guidelines contained within this publication are guidelines, and that each installation may have variables outside of the guidelines contained herein. Said variables must be taken into consideration when installing or using the product, and Inseego Corp.
Product Overview This document provides a high-level description of the circuits and their operation that could be used to interface to external device for connectivity: • • • • • • 1 3G WCDMA for Global Networks. Wi-Fi 2.5 GHz, 5GHz Networks 4G LTE Networks for North American and Global Networks 5G Sub 6 New Radio (NR) Access Technology for North American and Global Networks Global Navigation Satellite System GNSS Interface Overview Below are MD2000 Hardware interface ports to external devices. 1.