Installation and Operation Manual

1.27.21 357-00046-01 Rev A © Inovonics, 2021 - www.inovonics.com
EN1342-60 Activity Monitoring Detector
Installation and Operation Manual
1 Overview
The EN1342-60 activity monitoring detector is designed specifically for
residential and senior living environments where a notification of daily
activity is necessary. It
leverages the latest motion detector technology,
including white light and pet immunity, to ensure performance accuracy.
Selectable fixed sleep intervals of two, four or six hours are used to
minimize wireless traffic in large installations. Check-in messages are sent
every 60 minutes to provide effective notification of activity even when the
device is in the fixed sleep cycle.
1.1 Inovonics Contact Information
If you have any problems with this procedure, contact Inovonics technical
support:
• E-mail: [e-mail].
• Phone: [phone].
2 Installation and Startup
2.1 Installation Notes
• These products are designed to be maintained by professional
security technicians
• Products are tested for indoor use
• All products should be manually tested weekly
2.2 Mount the Housing and Install the Battery
1. Loosen the captive housing screw.
2. Open the housing
.
Figure 1 Open the housing
3. Remove the EN1342-60 from the mounting bracket per Figure 2.
Figure 2 Remove the EN1342-60 from the mounting bracket
4. Noting the detection coverage in Figure 3, determine mounting location.
• Avoid areas facing direct sunlight, areas where areas that may
change temperature rapidly, and areas where there are air ducts or
substantial airflows.
• The recommended mounting height is 6.5 feet to 7.5 feet (2.1 to 2.3
m).
Figure 3 EN1342-60 detection coverage area
For product and installation videos visit us at
www.inovonics.com/videos or use the QR
code below.
TOP VIEW
along side wall
7.2 ft
26.2 ft
6.6 ft
13.1 ft
0
89°
37 ft
26.2 ft
37 ft 26.2 ft
Side VIEW
6.6 ft
13.1 ft
26.2 ft