User Manual

2
3
4
1 5
8
6
7
INNOVV K3 Product Overview
1. The INNOVV K3 dash cam features dual cameras to provide complete coverage around you,
capturing footage in Full HD 1080P at 30 FPS.
2. It is equipped with the Wi-Fi and GPS module, allowing you to access and share routes, tracks and
waypoints via INNOVV App.
3. Both of the DVR and cameras are certified with an IP67 rating.
4. Both cameras are constructed of durable and lightweight aerospace aluminum alloys, enabling a
better anti-electromagnetic interference capability.
5. It adopts the intelligent DC converter for power supply to better protect the device from battery draining
problem.
6. It runs faster and has better performance with dual-core processors on the DVR.
7. It is easy and flexible to install with its small size and smart design.
1. Function Button
2. Recording Indicator
3. GPS Indicator
4. Wi-Fi Indicator
5. Remote Control
6. Remote Control Cable (6-pin male)
7. Remote Control Cable Connected to DVR(6-pin female)
8. Front Camera
9. Rear Camera
10. Rear Camera Cable (6-pin female)
11. Front Camera Cable (6-pin female)
12. Rear Camera Cable Connected to DVR (6-pin male)
13. Front Camera Cable Connected to DVR (6-pin male)
14. Waterproof Silicone Plug
15. TF Card Port
16. USB Port
17. DVR
18. GPS Cable Connected to DVR(3-pin female)
19. GPS Cable (3-pin male)
20. GPS Module
21. Fuse Holder
22. Positive Terminal of Power Supply
23. Negative Terminal of Power Supply
24. ACC Wire (Offers 12V switch power source after ignition)
25. Power Indicator (Blue light on means there is 5.3V voltage)
26. DC Converter
27. Microphone
28. Power Input Cable Connected to DVR(3-pin male)
29. Microphone Cable Connected to DVR (2-pin female)
30. Microphone Cable (2-pin male)
31. Power Output Cable (3-pin female)
Installation Method-1 (Without L Bracket)
INNOVV K3 Dash Cam
Connected
to the DVR
① Remote control
② L bracket
③ M6*8 mm screw *1 piece
Remote Control Installation
1.Saving current video by pressing the button for once.
2.Photo taking by pressing the button twice in a short time.
3. Factory reset by pressing the button for 10 seconds.
Instruction of the function button on remote control
Firmware
Updating
Status
Off
Not
working
Wi-Fi off
GPS off
LED Indicators
Solid On
Recording
Connected
Connected
Flash quickly
(5 flashes
per second)
Flash slowly
(1 flash per
second)
Flash quickly for
a long time (2 flashes
updated every second)
Flash quickly
(only 1 flash)
Successful photo
taking by pressing
the button twice in
a short time.
Accident video, protected
video or parking video
is recorded under
specific conditions.
Not recording
Connecting
No TF Card/ TF
Card Error
R camera
unconnected
or disconnected
Connecting
/
/
/
/
/
Remote Control Instruction
① Cable clip
② Camera
③ U bracket
④ M6*8mm screw *2 pieces
⑤ Small block
⑥ Deformable metal plate
⑦ 3M double-sided tape
⑧ M6*12mm screw *1 piece
Camera Installation
Installation Method-2 (With L Bracket)
Camera Installation
Installation Method-3 (With Deformable Metal Plate)
Camera Installation
Motorcycle lnstallation Demo
Rearview Mirror
Connected
to the ACC wire
App Installation Guide
Android User: Search INNOVV in Google Play Store, then download and install it on your phone.
iPhone User: Search INNOVV in App Store, then download and install it on your phone.
With the DVR working normally and the Wi-Fi indicator lights on, please kindly turn on the Wi-Fi and then search the Wi-Fi network
named INNOVV_K3_xxxx, and you could easily join it with the default password 12345678.
Some Android users may get the error message that “This WLAN network has no Internet access. Connect anyway?” Please kindly
click the “Connect” button to continue the network connection.
Please make sure that the Microphone cable is not close to the GPS cable.
The INNOVV K3 could support up to󵿎 󵿎TF card capacity to enable long recording times.256GB
Video Speed Class Mark: V30
UHS Speed Class Mark: U3
Microphone Instruction
Parking Mode Instruction
An open foam cover around the microphone is used as the first line of defence againstwind noise. You are suggested to put the microphone against the heading direction to
further minimize the wind noise.
If the Parking Mode has been enabled with INNOVV App on your phone, INNOVV K3 will provide around-the-clock protection when you are away and even the engine is not
running. The K3’s smart power supply module triggers parking mode automatically, and the INNOVV K3 will wake up and start recording when an impact or motion is
detected by the built-in G-Sensor.
In order to make the Parking Mode function properly, please make sure that the INNOVV K3 should always be connected to a power source. And the red wire and the black
wire of the converter shall be connected to the motorcycle battery’s positive terminal and negative terminal separately. The yellow cable shall be connected to the ACC wire.
The output voltage of the battery shall be at least 12V.
.
There are 5 grades for the G-sensor’s sensitivity and each grade has 2 options. Users could easily adjust that with INNOVV App according to different road conditions. The
smaller the number is, and the less sensitive the G-sensor is.
G-Sensor Instruction
Photos are
stored here
INNOVV K3 dash cam requires at least a U1 (UHS Speed Class 1), V10 (Video SpeedClass 10) rated or faster TF card to ensure better performance.
TF Card Instruction
/
INNOVV K3 Dash Cam
Wi-Fi name reset only be
effective after restarting
Password reset only be
effective after restarting
Options for cameras
Options for microphone
volume
On & off
TF card inserted/ Empty/ Error
On & off
Options for unit of speed
On & off
Customize logo watermark
on videos
Display the storage of the
TF card
Display the remaining
storage of the TF card
To format the TF card
On & off
Options for G-Sensor’s
sensitivity
TF card inserted/
Empty/ Error
To format the TF card
On & off
On & off
Quick