MODEL: VTA-270B 6-IN-1 TURNTABLE 1
Important Safety Instructions .................................................................................... 3 Product Overview ...................................................................................................... 5 Setup / Basic Operation ............................................................................................. 8 Listening to the FM Radio ......................................................................................... 8 Listening to a CD..................
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
15. -This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
Product Overview Front View : Toggle to turn the unit on or off. 1. POWER 2. 3.5mm AUX IN JACK: Connect your external source to the AUX IN jack. 3. 3.5mm HEADPHONE JACK 4. STEREO SPEAKERS 5. DISC TRAY 6. PLAY/PAUSE : Press to start playback, press again to pause. (Note: This button only works in CD & Bluetooth mode.) 7. OPEN/CLOSE : In CD mode, use to open and close the disc tray. (Note: CD door takes four (4) seconds to open when open/close ( 8. 9. STOP ) is pressed in CD mode.
Left side View 18. CASSETTE FF & EJECT: Press halfway to fast forward, press all the way to end and eject the tape. Rear View 19. LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. 20. AC Power Cord Connect the AC plugs into a wall outlet.
Parts of the Turntable A. Turntable. B. C. D. E. Safety Screw (for transport) Before using the unit, turn the screw clockwise using a coin or screwdriver. Important: When you transport the unit, turn the screw counterclockwise to secure the turntable. Speed Selector. Tone Arm holder. Tone Arm. Before use, completely loosen the twist F. G. H. Stylus. 45 RPM adaptor. Cue-lever. Use this lever to lift the tone arm. tie on the tone arm and uplift tone arm.
Setup / Basic Operation Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the AC power cord to a wall outlet. Note: -You’re strongly recommended that this product should be operated only from the type of power source indicated on the marking label. -To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation 1. Move the POWER toggle to the ON position.
5. 6. 7. 8. 9. After that the number of tracks will show on the display and it will begin to playback from the first track automatically. To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume. To return to the previous or skip tracks, press the corresponding button ( or ). Pressing once will restart the current track. Pressing twice in succession will return to the beginning of the previous track.
6. When the selection of track numbers has been finished, press the PLAY button ( ) to start program playback. (Note: when all 20 program tracks are finalized, press the PROGRAM button once and “FI” will appear on the display) 7. Press the STOP ( ) button twice to cancel the program mode and then the “PROG” will disappear from the display. To check the programmed order In the stop mode, press ( or that have been programmed.
Listening to a Vinyl Record 1. Rotate to select “PHONO” function. The LED Display will display “PHON”. 2. Gently open the top cover. Note: Be careful not to pinch your finger when opening/closing the top cover. 3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor. 4. Select the appropriate speed. 5. Remove the tone arm rest holder to release the tone arm. 6. Gently raise the arm by using the tone arm lever.
Handling Vinyl Records • Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your record’s quality to deteriorate. • To clean a record, use a soft anti-static cloth to gently wipe the record surface. • Keep records in their protective sleeves when not in use. • Always store records upright on their edges • Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.
Specifications GENERAL Power Requirements Power Consumption Dimensions (W x H x D) Weight AC 120 V~60 Hz 40W 18.9 in x 15 in x 7.87 in (approx.) 480 mm x 380 mm x 200 mm (approx.) 18.15 lbs (approx.) 8.25 kg (approx.) AMPLIFIER Output Power Frequency Response 5W+5W 60 to 20,000 Hz SPEAKER SYSTEM Type Impedance Input Power 2-way 8 ohms Max.
GENERAL Troubleshooting Guide Symptom Possible Cause Solution • Unit will not power on. • No sound output from speakers. • Unit • Connect • Noise/Distortion • The FM RADIO TAPE • Unit CD PLAYER in sound output. fails to respond. tape does not play. is unplugged. • The • The volume level is set too low. input selector does not match the playback source. unit is too close to a TV set or another interfering device.
Bluetooth • No sound. • Sound • Unable is garbled. to pair with a Bluetooth device. • The unit is not switch to Bluetooth mode. • Your device’s and/or the unit’s volume not turn up. • Your device is too far from the unit or there’re some obstacle between your device and the unit. • Your device’s and/or the unit’s volume not adjust properly. • Your device doesn’t have Bluetooth connectivity. • The Bluetooth pairing is not successful. • Ensure the unit is switched to BT mode.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC Statement This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence.
Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable.