3-IN-1 TURNTABLE MODEL: VTA-71 Instruction Manual PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE.
CONTENTS Safety Instructions..................................................................................................1 Product Overview................................................................................................... 3 Setup/Basic Operation........................................................................................... 5 Listening to a Vinyl Record....................................................................................
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT: RISQUE DE CHOC ÉLECTRIQUE- NE PAS OUVRIR. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts insides.
9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.
PRODUCT OVERVIEW Front view BT PHONO V OL U ME BT OUT 1 2 3 4 5 6 7 8 9 1. POWER: Press to turn the unit ON or OFF. 2. BT OUT: Press to activate the Bluetooth output function. 3. PLAY/PAUSE ( ) Press to start playback, press again to pause. Long press the button for 3 seconds to disconnect the Bluetooth pairing. (NOTE: This button only works in Bluetooth mode.) 4. PREVIOUS ( ) Skip to the previous track or station. 5. NEXT ( ) Skip to the next track or station. 6. Display Screen 7. 3.
10. LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack. 11. DC Input Jack Connect the power adapter to the jack to power on the unit. Part of the Turntable 13 14 15 16 17 18 12 19 12. Turntable 13. 45 RPM adapter 14. Tone Arm holder 15.
SETUP/BASIC OPERATION Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the power adapter to the DC Input jack to power on the unit. Note: - It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label. Basic Operation 1. Press the POWER button to turn the unit on. 2. Select mode by turning the BT/PHONO KNOB. 3.
LISTENING TO A VINYL RECORD 1. Turn the unit ON by pressing the POWER button. 2. Turn the BT/PHONO KNOB to enter the PHONO mode. 3. Gently open the dust cover. 4. Put the record on the turntable. Select the speed. When playing a 45 RPM record, use the included 45 adaptor. 5. Gently push the Tone Arm Holder to the right to release the TONE ARM. 6. Raise the Cue Lever to lift the TONE ARM off the tone arm support. 7. Move the TONE ARM gently to the edge of the record (or the starting point of the track).
LISTENING TO AN EXTERNAL DEVICE (BLUTOOTH-IN MODE) In BT (Bluetooth) mode, this unit can play music from external devices which have a built-in Bluetooth feature. GETTING CONNECTED USING BLUETOOTH (BT RECEIVE-IN) 1. Turn the BT/PHONO KNOB to select BT mode. 2. The “bt” will flash on the Display Screen. 3. Turn ON the Bluetooth function on your external device. NOTE: The effective distance between your external device and this unit is 10 meters (33ft). 4.
MAINTENANCE/PROPER HANDLING Handling Vinyl Records • Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your record’s quality to deteriorate. • To clean a record, use a soft anti-static cloth to gently wipe the record surface. • Keep records in their protective sleeves when not in use. • Always store records upright on their edges. • Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.
PHONO GENERAL TROUBLESHOOTING GUIDE Symptom Possible Cause Solution • Unit will not power on • Unit is unplugged. • Connect the DC power adapter to the jack. • No sound output from speakers • The volume level is set • Adjust the volume. too low. • Select the correct • The input selector does input source. not match the playback source. • Noise/Distortion in sound output • The unit is too close to a TV set or another Interfering device. • Turn off the TV or other appliance, and relocate the unit.
Possible Cause Solution • No sound • The unit is not switched to Bluetooth mode. • Your device’s and/or your unit’s volume is not turn up. • Your device is too far from the unit or there’re some obstacle between your device and your unit. • Ensure the unit is switched to BT mode. • Move your Bluetooth device closer to unit. • Turn up the volume on your portable device and/or the unit. • Turn OFF your Bluetooth device and unit. Then power them both back ON.
SPECIFICATIONS GENERAL Power adapter ----------------------- DC 5V/1A Power Consumption --------------- 5W Power Output ------------------------ 2 x 2W Size ------------------------------------- 12.7'’(322mm)W x12.3'’(312mm)D x 5.2'’(131mm)H Weight --------------------------------- 4.5 lbs (2kg) RECORD PLAYER Speeds -------------------------------- 33-1/3 RPM, 45 RPM and 78 RPM BLUETOOTH Bluetooth Version ------------------- V4.
FCC Statement 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
IC WARNING - English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.
Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”.
