Urban Outfitters Bluetooth Speaker with Cassette MODEL:CAB-D7050 PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT KEEP IT IN A SAFE PLACE FOR FUTURE REFERENCE
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 6. Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered.
moisture, does not operate normally, or has been dropped. 15. Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions. 16.
20. Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 22.
HANDLING CASSETTE Metal and chrome (cobalt) tapes have identification holes. Use your finger or a pencil to turn the cassette's hub and take up any slack tape. Avoid touching the tape. Fingerprints attract dust and dirt. Avoid dropping or subjecting cassettes to excessive shocks. As C-120 tapes are physically weak and could become entangled in transport mechanism, do not use them. On top of heaters, exposed to direct sunlight or in any other places with high temperatures.
PRODUCT OVERVIEW Front View 2 1 Rear View 3 4 Top View 5 6 7 8 9 10 11 1. Cassette Door 2. Speaker 3. AUX IN Jack 4. DC IN Jack 5. Power On/Off, Volume Knob 6. Play/Pause Button 12 13 7. Stop/Open Button 8. Fast Backward Button 9. Fast Forward Button 10. Play Button 11. Record Button 8 14 15 16 17 12. Play/Pause, Disconnect Button 13. Mode Button 14. AUX Indicator 15. Cassette Indicator 16. Bluetooth Indicator 17.
POWER SOURCE The unit has a built in Li-ion rechargeable battery, recharge it before use or when it is drained as follows: 1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port on the rear of unit. 2. Connect the full sized USB Plug from the supplied USB Connection Cable to the USB Port on the Computer or USB Charger. (Computer and USB Charger NOT supplied). 3.
BOUETOOTH OPERATION 1. Turn the Power On/Off/Volume Button clockwise until a sound of "click" heard to power on the unit. The power indicator will light. 2. Press the (mode button) until the Bluetooth Indicator flashes White, the unit will send a tone. 3. Activate the bluetooth function on your external device, and try searching, the pairing name "UO_TUNE_IN_001" will appear on the pairing name list. 4. Select it and register in your player. 5.
CASSETTE OPERATION 1. Turn the Power On/Off/Volume Button clockwise until a sound of "click" heard to power on the unit. The power indicator will light. 2. Press the (mode button) until the Cassette Indicator turns White. 3. Press the button to open the Cassette door, put the cassettte tape into the cassette compartment and close the door. 4. Press the button to start play the cassette tape. 5. During playing, press the button to pause, press it again to resume playing.
TROUBLESHOOTING Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Can’t power on Built in battery drained Recharge the battery No sound or sound weak Volume level of paired/connected device Rise the volume level of the is in low level paired/connected device Volume level of the connected/paired Reduce the volume level of the device too high connected/paired device Sound distortion BT not functioning Cassette tape can not play The external BT device had
