Manualshelf

User Manual

ManualsBrandsInnovative Concepts and Design ManualsElectronicsWireless Receiver
123
Table Of Contents
1 2 3 4 5 6 7 8 9 10 311 12 13 14 15
16
17
18 19 20
21 22
23
24
25 26
1. Power Indicator
2. Power Switch
3. Antenna socket
4. Channel 1 Volume Control
5. Channel 1 RF indicator
6. Channel 1 AF indicator
7. Channel 2 Volume Control
8. Channel 2 RF indicator
9. Channel 2 AF indicator
10. Channel 3 Volume Control
11. Channel 3 RF indicator
12. Channel 3 AF indicator
13. Channel 4 Volume Control
14. Channel 4 RF indicator
15. Channel 4 AF indicator
16. Mixed balanced XLR output
17. Mixed unbalanced 1/4" output
18. Channel 4 individual output
19. Channel 3 individual output
20. Channel 2 individual output
21. Channel 1 individual output
22. Channel 4 squelch control
23. Channel 3 squelch control
24. Channel 2 squelch control
25. Channel 1 squelch control
26. DC input
UHF-04 WIRELESS RECEIVER
Parts Description
Front
Rear
Operation
1. Connect one end of supplied 6.35mm to 6.35mm plug audio cable into AF OUT jack
on rear panel of the receiver. Connect the other end of the audio cable into "MIC
IN" or "AUX IN" of amplifier or mixer.
2. Connect DC plug of supplied AC/DC adapter to DC INPUT jack on rear panel of the
receiver. Connect AC plug of AC/DC adapter to mains power socket.
3. Turn on the wireless receiver by switching power switch to ON position and
the POWER light will illuminate to show the receiver unit is working.
4. Fully extend the aerials to the maximum height.
5. Switch ON the transmitter. The receiver RF indicator will light. When you
talk, AF LEVEL indicators will blink to show the sound level.
6. Adjust the volume and tone levels of your amplifier system as well as the
receiver as required.

Summary of content (3 pages)