Wireless Hi-Frequency Headphone ITGSH-150 Product Manual
ITGSH-150 - The Wireless Hi-Frequency Headphones are designed for TV, music and other audio/video devices. The user can now listen at their own preferred volume without disturbing others. This headset provides a clear signal up to 24 feet within direct sight of the transmitter via infrared technology - so you can hear the TV, DVD’s, CD’s, VCR Tapes or Radio programs. IMPORTANT SAFETY INSTRUCTIONS: To achieve the best quality from this product, please read this manual carefully before operating.
INSTRUCTIONAL PHOTO REFERENCE: (Step-by-step instructions are on page 3) figure 1 figure 3 Correct Battery Installation in the Transmitter figure 2 Correct Battery Installation in the Headphones figure 4 2 LED’s show the unit is charging.
SET-UP AND INSTRUCTIONS: 1. Place the transmitter on top of your TV, shelf or flat surface. Make sure there is a power socket available for the main power adaptor 2. Plug the transmitter’s main power adapter into a standard electrical power socket, then plug the power lead into the transmitter base socket (please see figure 4 ). 3.
SET UP AND INSTRUCTIONS continued... 8. To use the headphone simply lift it out of the cradle and put it on your head (under your chin). Then turn the volume up to a comfortable level and you are ready to watch your favorite program ( please see figure 5 ). 9. Note: please make sure that the under chin headphone is ON (see figure 5 ). You should be able to read the word VOLUME properly. If the word VOLUME is upside down, then you have the headphones on backwards. 10.
TROUBLESHOOTING GUIDE: SYMPTOM SOLUTION Front two LEDs, don't light up when batteries are placed into the battery compartment properly. • Make sure that the power is connected to the main power socket and the transmitter. The right LED does not light up on the transmitter when a battery is inserted. • The battery has not been installed correctly in the battery compartment. The middle LED does not light up when the headset is place into the dock in the transmitter.
NOTE • Due to continuing development of the products, the specifications and design of this product is subject to change without prior notice. • The product warranty does not cover normal wear or damage resulting from misuse, neglect, improper storage, accident, unauthorized repair or alternation. WARNING • Listening to uncomfortable sound levels for prolonged periods could adversely affect your hearing.
CAUTION continued... DO NOT place this product on a very hot or very cold surfaces. Keep out of direct sunlight. DO NOT install the product near any heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat. • Avoid using or storing the product in a dusty or damp area, in any unstable location or in any magnetic zone. • To avoid risk of electric shock, DO NOT exposes this product to water or dampness.
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Innovative Technology Electronics Corp. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”.