Installation Manual

ManualsBrandsInnoSenT ManualsElectronics24 GHz Doppler Module

InnoSenT sets standards – worldwide

Page 1 Version 1.0 DATA SHEET IVS-979

Installa on Manual IVS-979

Version 1.0 - 15.03.2012

The IVS-979 is a K-Band VCO Transceiver

with advanced SiGe MMIC technology that

can be operated in FSK and FMCW mode.

The sensor provides a special RF-design for

maximum sensi! vity in long range appli-

ca! ons such as traﬃ c monitoring or speed

enforcement.

Another smart new feature is the 1/x divider

output for VCO tuning slope lineariza! on.

InnoSenT GmbH has established and applies

a quality system for: development, produc-

! on and sales of radar sensors for commer-

cial and industrial sensors.

An audit was performed, Report No. 010350

Proof has been furnished

that the requirements

according to DIN EN ISO

9001:2000 are fulﬁ lled.

This product is compliant to

the restric! on of hazardous

substances (RoHS - European

Union direc! ve 2002/95/EG)

Features:

» K-Band VCO Transceiver with advanced SiGe MMIC technology

» FSK / FMCW modes

» 1/x divider for reference frequency output

» stereo (dual channel) opera! on to detect direc! on of mo! on

» integrated RF-pre-ampliﬁ er

Product Family

Applica ons

K-Band VCO Transceiver with advanced MMIC technology

» Traﬃ c Monitoring

Movement

Velocity

Direc! on

Presence

Distance

Angle

CONFIDENTIAL AND PROPRIETARY

The informa! on contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall

not be disclosed by the recipient to third par! es without prior consent of InnoSenT in wri! ng.

Descrip! on

Cer! ﬁ cates

Summary of content (5 pages)

PAGE 1
InnoSenT sets standards – worldwide Installaon Manual IVS-979 Version 1.0 - 15.03.2012 Product Family Applicaons K-Band VCO Transceiver with advanced MMIC technology » Traﬃc Monitoring Movement Velocity Direc!on Presence Distance Angle Features: Cer!ﬁcates The IVS-979 is a K-Band VCO Transceiver with advanced SiGe MMIC technology that can be operated in FSK and FMCW mode.
PAGE 2
InnoSenT sets standards – worldwide Handling Precau"ons This InnoSenT sensor is sensi#ve to damage from ESD. Normal precau#ons as usally applied to CMOS devices are suﬃcient when handling this device. Touching the signal output PINs has to be avoided at any #me before soldering or plugging the device into a motherboard. Electrical Characteris"cs Parameter Symbol Min. Typ. Max. Units Comment GHz depending on Vtune Oscillator transmit frequencies varactor tuning voltage f Vtune 24.000 - 24.
PAGE 3
InnoSenT sets standards – worldwide Tx - antenna paern 0 -5 output power [dBm] -10 -15 -20 -25 -30 -35 -40 -180,0 -150,0 -120,0 -90,0 -60,0 -30,0 0,0 30,0 60,0 90,0 120,0 150,0 180,0 angle [°] Parameter Symbol full beam width @ -3dB side-lobe suppression Min. Typ. Max.
PAGE 4
InnoSenT sets standards – worldwide Mechanical Outlines All dimensions in mm • OEM Integrator must ensure that the end user manual may not contain any informa"on about the way to install or remove the module from the ﬁnal product. • Depending on the ﬁnal host device addi"onal authoriza"on requirements for the nontransmi#er func"ons of the transmi#er module may be required (i.e.
PAGE 5
InnoSenT sets standards – worldwide Radiofrequency radia"on exposure Informa"on: This equipment complies with FCC radia"on exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmi#er must not be co-located or opera"ng in conjunc"on with any other antenna or transmi#er.